No Mess Gender Reveal Balloon Pop

  Рет қаралды 278,329

Event Answer

Event Answer

Күн бұрын

Пікірлер: 108
@deandrenelson7462
@deandrenelson7462 2 жыл бұрын
I tried it and both balloons popped.. any idea on why this might have happened??
@EventAnswer
@EventAnswer 2 жыл бұрын
Oh no! To prevent the bubble from popping there are a couple things we can trouble shoot. 1. Don't try and pop it immediately after inflating. Wait at least 30 minutes so the balloons have a chance to relax. 2. Under inflate the bubble a little bit so it isn't under as much tension as the latex balloon. The latex balloon should be near its full size so it does pop. 3. Place the tape a few inches from the bubble's seam and not right on it, as that is the weak point of the bubble. 4. Rub the tape so it is adhered to the bubble really well. If in double you can use a second piece of tape on top of the first. 5. Use a small pin to pop the bubble.
@stasiwilliams
@stasiwilliams 2 жыл бұрын
Oh God! I made this and the reveal is today. 😳 I pray all goes well. If not we will still see what it is. I did everything but it may be over inflated. 1 out of five ain’t bad. 🤞🏽
@nataliesantos4421
@nataliesantos4421 2 жыл бұрын
@@stasiwilliams how did it go??
@stasiwilliams
@stasiwilliams 2 жыл бұрын
@@nataliesantos4421 Both balloons popped. I wanted it to be big. 🤦🏽‍♀️ But it was ooooh so fun. It’s a boy. 💙
@audiblycalm3470
@audiblycalm3470 2 жыл бұрын
Hi guys you can also try stretching the balloons out before hand make sure its nice and flexible
@12eriser
@12eriser 2 жыл бұрын
I did this for my best friend’s gender reveal and it was a success!! Of course I did a practice one a week before just in cause I ran into any hiccups for the real one. Everyone loved the idea! Mess free and easy to dispose. Thank you for this! Beautiful memories were created 💙
@azrakurtovic800
@azrakurtovic800 2 жыл бұрын
How did you manage to not pop the bubble balloon?
@12eriser
@12eriser 2 жыл бұрын
@@azrakurtovic800 I used a 20 inch size Bobo balloon and I use an 18 inch size black balloon and I made sure that I filled the black balloon it’s full 18 inch size. With those sizes the Bobo balloon will still be at its max
@rikagradney
@rikagradney Жыл бұрын
Did you let it sit any amount of time before popping it?
@Donisiarene
@Donisiarene 10 ай бұрын
Thank you so much for this tutorial. I had 3 prior failed attempts; both balloons popped. But after finding your tutorial it was a success!!! I’m so happy bc the gender reveal is tomorrow 😊
@mommym8269
@mommym8269 2 жыл бұрын
May I ask what may be the reason why the inside balloon doesn’t pop with a pin instead it just slowly lose its air?
@andreacline7141
@andreacline7141 2 жыл бұрын
So cool. I thank you for explaining this technique in detail. Does the bobo balloon deflate if you don't add additional tape after the pin goes in?
@EventAnswer
@EventAnswer 2 жыл бұрын
Hi Andrea, I'm glad the video was helpful! Yes the bubble balloon will slowly continue to deflate if the pin hole isn't taped over. I taped the hole of the balloon I used in the video, and it is still inflated over a week later.
@ClosPick
@ClosPick 3 ай бұрын
I followed this tutorial and the balloon pop came out perfectly !
@modesterpfaira8465
@modesterpfaira8465 Жыл бұрын
Can I only use tissue paper confetti
@JasmineArielH
@JasmineArielH 2 жыл бұрын
Hey, can i use an 20inch clear boho and an 18inch black?
@mauriciocebada2863
@mauriciocebada2863 2 жыл бұрын
Incredible well explain, you're a PRO, thank you for sharing!!
@Drachenbauer
@Drachenbauer Жыл бұрын
or what about a strong laserpointer to pop it? Once I saw a sience-docomentation of lasers and there was a guy, who popped a black balloon, that was inside a clear one without popping the clear one by using a strong laserpointer.
@MrPapable
@MrPapable Жыл бұрын
Hi have you used 1” scotch tape i tried it with no success probably a thicker one would help?
@emediongibanga9281
@emediongibanga9281 Жыл бұрын
Thank you so much for this tutorial. Will try it and hope it comes out well. Thank you
@m.martin5110
@m.martin5110 Жыл бұрын
I am making one of these for a friend's reveal at the end of the month. I have done a tester, and it worked perfectly only issue I have is I can see the 260 I used to tie the big balloon to the base any suggestions?
@Karan-Singh999
@Karan-Singh999 2 жыл бұрын
Amazing video!! I am think you do this.. in the uk I can only get hold of a 36” clear balloons and 18” black balloon will this work ?
@princessalways4eva
@princessalways4eva 2 жыл бұрын
This is awesome. I’ve just gotten into balloons. I recently made a huge balloon garland for my oldest brother’s retirement party. I just HAVE to try this. New subbie here. Tfs and have a great day.🤗🎈
@shontanaehall6625
@shontanaehall6625 Ай бұрын
So I’m having trouble every time I pop it the boho balloon pops right along with the inner balloon how do I fix this
@silviat5425
@silviat5425 Жыл бұрын
Is there a way to pop the bubble balloon when I fill it with 5-inch balloons? I want to pop the outside balloon..
@kimberja4023
@kimberja4023 2 жыл бұрын
Thank you for this video! May I ask, what kind of marker was that?
@Mitchix28
@Mitchix28 Жыл бұрын
hello, whats the size of the black balloon?
@jeanlatayan4667
@jeanlatayan4667 2 жыл бұрын
Can i do it if both black and clear balloons have the same size?
@laavanyannadi30
@laavanyannadi30 Жыл бұрын
How long in advance can you make it?
@GladysOsma
@GladysOsma Жыл бұрын
Hola buenos dias Muy lindo , Pero tengo una pregunta . Cómo se llaman los papelitos color verde q le introdujo al globo y el líquido .aquí en Colombia no sé con qué nombre se conseguirán
@lindamiller4344
@lindamiller4344 3 ай бұрын
This is so awesome, what would someone charge for one of these?!
@georgia6095
@georgia6095 2 жыл бұрын
Hi tried this 3 times abs both the balloons popped each time I used my electric pump to inflate and tried with in minutes of making it
@EventAnswer
@EventAnswer 2 жыл бұрын
I'm sorry it isn't working out. Try waiting for an hour before popping it. I learned from another balloon artist the balloons need a chance to relax.
@jezreelgve
@jezreelgve 2 жыл бұрын
The green grass is that a backdrop or artificial grass? Can you link where to get that please. Lovely tips thank you
@EventAnswer
@EventAnswer 2 жыл бұрын
Hi Dorothy, thanks for watching! That is a boxwood wall set the I got from efavormart. This is the one I bought bit.ly/3pyDUYh
@Serenov.a
@Serenov.a 2 жыл бұрын
So my black balloon deflated a bit because it got a hole when I tied it. I'm afraid it won't pop now without enough tension. Is there any hope?
@jennifernguyen3830
@jennifernguyen3830 2 жыл бұрын
Any idea why when I pop the balloon the blue powder does not blow all over the bobo and just stays at the bottom of the balloon?
@maximecaldwell6975
@maximecaldwell6975 2 жыл бұрын
Thanks for this! How long can these sit before popping? Could they be made a day or so ahead of time? 🙂
@EventAnswer
@EventAnswer 2 жыл бұрын
The bobo balloons looks great for a long time. You could easily make this 2-3 days ahead of time. After popping the black balloon I still have the bobo balloon weeks later and it still looks great!
@maximecaldwell6975
@maximecaldwell6975 2 жыл бұрын
@@EventAnswer Thank you!
@indyajewell8382
@indyajewell8382 2 жыл бұрын
Where did you get the bobo balloon and black balloon from
@tsheringtopgay4080
@tsheringtopgay4080 2 жыл бұрын
Hi! Thank you so much for video! Can you please let me know what type of marker/pen you are using to write on the balloon? And what is the size of PVC and black balloon? I am trying to make one for my sister’s baby shower. Your answers will be highly appreciated.
@EventAnswer
@EventAnswer 2 жыл бұрын
Hi Tshering, I used a white POSCA paint pen on the balloon. Every item I used is listed in the description box with links to the exact product so you can replicate what I made. I hope you have a wonderful baby shower!
@aprilrevista-ou3cq
@aprilrevista-ou3cq 9 ай бұрын
Looks awesome ♥️
@LiloMissPerfect09
@LiloMissPerfect09 2 жыл бұрын
Hi, will it still work if I use both 18in in boho and latex? Or do the latex need to be a bit smaller?
@aliysavirani5107
@aliysavirani5107 2 жыл бұрын
I'm really struggling to find black gender balloons here in the UK to fit a 24 inch bobo balloon. I personally feel the 36 inch gender reveal balloons are too big but could you still use these or would they not inflate enough inside a 24 inch bobo? TIA
@EventAnswer
@EventAnswer 2 жыл бұрын
Hi great question. I wouldn't use a black 36" inside the 24" bobo. We want the black balloon to be inflated close to it's full size so it pops easily. I would look for a 18-24" black balloon and then under inflate the bubble to match the max size of the black balloon. Tuftex and Betallic make both 18" and 24" balloons. I'm not sure what is available in the UK, but I hope this helps. Good luck!
@AmyH.-mn5rw
@AmyH.-mn5rw 7 ай бұрын
Hi~ I’ve tried it 6 times but all failed 😢 I’m pretty exhausted now… I really don’t know where went wrong…. 3 of the time the inside ballon didn’t pop after I poked…… and the rest are both ballons ( the inside and outside one) popped at the same time… what possibility would caused my failure? Please help… my friend’s baby gender reveal party is next week… thank you
@WomenPrayGhana
@WomenPrayGhana 2 жыл бұрын
Thank you soo much this video helps me with easy details
@UniqueDesignsandBalloons
@UniqueDesignsandBalloons 10 ай бұрын
Love it❤🎉
@chandrawilliams4847
@chandrawilliams4847 2 жыл бұрын
Where’d you get the clear balloon
@chloedarnell1810
@chloedarnell1810 2 жыл бұрын
Happy New year. I love this idea, thank you for sharing your designs and making them so easy to follow 😍🤩
@juliem2851
@juliem2851 2 жыл бұрын
I love this video! Thank you. I've tested it out and after a few duds (poor quality balloons) I've finally got it working. Do you know if it needs to be sello tape or have you tried stickers before?
@m0simosi
@m0simosi Жыл бұрын
What did you make differently so both wont pop??
@reesecheng6408
@reesecheng6408 2 жыл бұрын
Thank you!
@artemisaspielmann4429
@artemisaspielmann4429 2 жыл бұрын
I’m a beginner n balloons. Where can I find that powder?
@KristinAlsup04
@KristinAlsup04 7 ай бұрын
What did you use to pop the balloon?
@EventAnswer
@EventAnswer 7 ай бұрын
I used a sewing pin. You want something sharp and small.
@azrakurtovic800
@azrakurtovic800 2 жыл бұрын
Hello, will this work with helium? . So im doing a gender reveal party for my sister and i wanted to do the no mess reveal. I wanted to know is this doable with helium? So once the inside balloon is popped, will the bubble balloon still float? I feel it should work, but haven’t tried it yet so I thought i would ask an expert first lol ❤️
@Soap_asmr8
@Soap_asmr8 Жыл бұрын
Beautiful ❤ how much do you sell these for?
@ThePattapoil
@ThePattapoil 9 ай бұрын
Bravo !
@eliaspakojmothibapula8454
@eliaspakojmothibapula8454 2 жыл бұрын
I am having a gender reveal this weekend, definitely going to do this because my budget is tight and I mean very tight...will post a picture here
@topshotsphotobooth3638
@topshotsphotobooth3638 2 жыл бұрын
Wow!!!!! Thank you!!I'm so trying this 🎈🎈
@EventAnswer
@EventAnswer 2 жыл бұрын
Have fun!
@Thedaintie
@Thedaintie 2 жыл бұрын
Genius! Thank you!❤️
@maryamalhashmi6723
@maryamalhashmi6723 2 жыл бұрын
the clear balloon i have popped from the other side can u helppp please
@dawoodmatiyat2160
@dawoodmatiyat2160 2 жыл бұрын
Nice black one is also 24 inch
@lynettajennings2758
@lynettajennings2758 2 жыл бұрын
Awesome. 😊 Thanks for sharing. 😊
@localreviewwithhonestperso9920
@localreviewwithhonestperso9920 2 жыл бұрын
Do you only inflate the black balloon? Not the bubble?
@EventAnswer
@EventAnswer 2 жыл бұрын
Yep! The bubble will inflate along with the black balloon.
@brittlonsdale
@brittlonsdale 2 жыл бұрын
I don't know what went wrong but both balloons popped for me?
@zaynavlog
@zaynavlog 2 жыл бұрын
May I know the sizez of the black and transparent balloons? Thankyou
@EventAnswer
@EventAnswer 2 жыл бұрын
I used an 18" black balloon and a 24" Bobo bubble balloon. Everything I used is listed in the description box with links to the same products. 😊 Happy making!
@zaynavlog
@zaynavlog 2 жыл бұрын
@@EventAnswer Thankyouuuuu. I've read it from the description after I posted my comment though. 😅
@jluong23
@jluong23 2 жыл бұрын
I made one, popped it but the black balloon didn’t pop quickly. The needle just made holes in the black balloon 😩 what happened?
@EventAnswer
@EventAnswer 2 жыл бұрын
The same thing happened to me when my black balloon was too under inflated. It is a balance of balloon sizes. The black balloon needs to be inflated to it's full size so it pops easily.
@jluong23
@jluong23 2 жыл бұрын
@@EventAnswer oh darn, I think that’s what happened then :( the bobo was 20” and the black one was 24” 😫
@iamhokage4013
@iamhokage4013 2 жыл бұрын
What do u call the clear balloon? And where to buy?
@EventAnswer
@EventAnswer 2 жыл бұрын
It is typically called a bubble balloon. There are a couple different brands and they call them all different things. The ones I used are Bobo balloons and there is an Amazon link in the description to the one I purchased.
@jlcm3796
@jlcm3796 2 жыл бұрын
Loved thanks for share 🤩
@geralt6416
@geralt6416 Жыл бұрын
Hi, can I use 20" or 24" bubble balloon (clear balloon) and latext balloon 18"? Will the inside balloon will only pop with those sizes?
@EventAnswer
@EventAnswer Жыл бұрын
You can use different sizes of balloons. The important thing is the latex balloon should always be the smaller balloon, so it is stretched tight and will easily pop while the bubble isn't quite as tight and less likely to pop.
@geralt6416
@geralt6416 Жыл бұрын
Thank you so much for responding to my question. I don't have an impulse heat sealer, can i either use the portable sealer- mostly the ones you use for chips or can i use a flat iron straightener for hair?
@azrakurtovic800
@azrakurtovic800 2 жыл бұрын
Omg 3 attempts and both balloons keep popping😞. Not sure what am I doing wrong
@giacablayan1202
@giacablayan1202 2 жыл бұрын
this is great . . . thank you for sharing🎈 where to you get the powder?
@mamatosh05
@mamatosh05 2 жыл бұрын
So cute! Thank you for this very detailed video.
@zyanney
@zyanney 2 жыл бұрын
Could I do this with helium??
@jenna526
@jenna526 Жыл бұрын
We have done several ‘test’ balloons using all the suggestions in the video and comments to prevent popping of the Bobo balloon and they have all popped. 😔
@crizzyscrib9963
@crizzyscrib9963 2 жыл бұрын
I can't do it huhu. Both were popping
@azrakurtovic800
@azrakurtovic800 2 жыл бұрын
Same here 😅
@MrPapable
@MrPapable Жыл бұрын
Have you used two packing tape or just a small scotch tape?
@alecheesacker4460
@alecheesacker4460 5 ай бұрын
Weather Gone Viral. The Black Gender Balloon went pop and revealed Blue for Boy. Popped with Heat.
@زوزايه-ج3ل
@زوزايه-ج3ل 2 жыл бұрын
😇😇
@purplecrystal1991
@purplecrystal1991 2 жыл бұрын
Now i understand why the bobo balloon didn't pop.
@mandigirl0815
@mandigirl0815 2 жыл бұрын
So when u inflated the black balloon after it had the powder ... U don't add air to the bobo balloon ?
@EventAnswer
@EventAnswer 2 жыл бұрын
Hi Amanda, That is correct. It is just like if you were double stuffing two latex balloons.
Мясо вегана? 🧐 @Whatthefshow
01:01
История одного вокалиста
Рет қаралды 7 МЛН
UFC 310 : Рахмонов VS Мачадо Гэрри
05:00
Setanta Sports UFC
Рет қаралды 1,2 МЛН
Cat mode and a glass of water #family #humor #fun
00:22
Kotiki_Z
Рет қаралды 42 МЛН
Gender Reveal Party Magic Balloon
12:28
Ask Me For A Balloon
Рет қаралды 25 М.
Cutting and Resealing Crystal Clearz™ Balloons
13:38
Amscan International
Рет қаралды 415 М.
Gender Reveal Inspiration: 10 Amazing Ideas You Need to See
8:14
Mother of Moms
Рет қаралды 63 М.
Stuffing Bubble Balloons| DIY Deco Bubble Balloon
25:29
Uptown Events
Рет қаралды 772 М.
Gender reveal Balloon hug/Balloon Bouquet/Gender Reveal idea
20:56
인형 꽃풍선 만드는법 전격 공개!! (How to make a flower balloon with a doll)
13:37
다니쌤의 랩핑 스튜디오
Рет қаралды 911 М.
DIY Balloon Garland Circle Arch Backdrop
13:40
Event Answer
Рет қаралды 1,1 МЛН