No More Servo Jittering/Glitching :)

My Corally Cs-5226 servo has been superb, and still is but for some reason it has developed a jitter that started to annoy me.
Most likely caused by grease gone down in the electronics,
A simple solution would be to buy a glitch buster but c'mon you guys seen what they charge for a 50p capacitator lol
So bought a few different ones and the 6800uf 16v did the trick.
Of course I will solder it to a cable with heat shrink and not use it as in the video :)

[@a.sanusinazareth9213]

Every devices that needs smooth running, mostly, using capacitor, AS IN NRF24L01 ... Great Tutorial! Thanks

[@enricodesign619]

i had this problem when testing my servos with the controller, but with just battery on, when i did i with the ESC as battery (which has capacitors) i stopped, thanks man, love from Denmark

[@JaceN3D]

So the capacitor bassically smoothes the rotation? If I want a super smoooth rotation, almost as if there is a big delay between the input and output, should I add a big capacitor?

[@lowercentenary]

So why was this happening again and what's the fix please? I'm new to this stuff...my car has same issue

[@mazspeed003]

Mines doing the same..glitches an twitches when you can adjust trim it stops an moves normal...use the trigger it glitches an twitches...is it the servo or reciever issue an where you get that black thing

[@richardadams2251]

I LOL at the 'redneck connection' thing!! Well done, and thank you !!!

[@Roha46]

Hi, I have same issue with my digital coreless servo (SAVOX1231sg) and I saw on youtube digital servos have problems with radio wave interference....I would like to try with your solution but I am interested how did you apply capacitor between servo and channel?

[@ThatSwedishGuy]

Just connect to any free channel

[@francescolocorriere]

You have insert the capacitor? What is result?

[@Roha46]

@@francescolocorriere power supply stability….I don’t have glitches anymore…..

[@IRFebi]

I have a mn99s rc, with standard esc condition using 7.4v 1200mah battery . i am having the same problem as in the video, can i use 1pcs 10v 2200uf? where should I connect the part, is it after the power supply line or before the servo line?

[@Mr.Respect.-_-]

Servo lines

[@francescolocorriere]

I have insert the capacitor and problem is resolved. Now align bl815h work very good

[@baxrok2.]

Excellent information. Thanks!

[@alvarofonseca7313]

Hi, Thanks for your video, tip, some servos will work with this solution, if don't work for you, the radio signal for the servo is wrong, 5mhz /11mhz, /16mhz most analog servos work perfect on 5mhz, most digital work on 11mhz , and digital brushless work with 16mhz, only the top pro radios has the options to set the frequency for your servo, this is why the pro drivers go smoothly on the track, have a great day. 👍

[@pokednaful]

Is it safe for use 16v capasitor to servo with 5v power?

[@Ritzz45]

Yes

[@FixitEasyDIY]

That big servo needs separate power supply. Servo tester will burn easy this way.

[@haydnholder7090]

Awesome brotha! Gives me some ideas to try out!

[@ThatSwedishGuy]

Nice to hear (y)

[@mohamadfauzery]

Hye sir..if i use 10000uf 25v can use..

[@isabelodelrosario3660]

Please help i have a issue of my steering, when i throttle forward the steering turn a bit to the right and the faster i throttle the bigger it turns and if i go reverse it turns left and the faster reverse the bigger the turn without touching the steering of the transmitter

[@thefriendlyteenager726]

Can’t you trim out the transmitter?

[@amitshnaider5894]

Hi man i have the same problem Should i connect it to the receiver

[@amitshnaider5894]

I mean this part

[@OwnDreamOfficial]

Thanks man, you save my circuit

[@ThatSwedishGuy]

Good it helped

[@adatussalim]

Nice, also work on nitro buggy?

[@ThatSwedishGuy]

Yes it will. Will work on many electronics that suffers from interference

[@francescolocorriere]

I have this problem with 2 servo align bl815h

[@thedarkknight9796]

Thx i had this problem

[@francescolocorriere]

You have resolved whith capacitor?

[@thedarkknight9796]

@@francescolocorriere No, it was just broken transmitter lol

[@thedarkknight9796]

The spring was broken

[@Airbrushkid]

It's called cheap servos.

[@brunosciaraffia3394]

No it does not. I’m here cause of holmes Hobbies shv800 v2 96kg 4S servo. 150 bucks... Is it cheap? 😅

[@Airbrushkid]

@@brunosciaraffia3394 ProModeler DS2685BLDP 2685 oz-in That's 167.8125 pounds. On 4S. And cost $339.99. So yes yours is cheap

[@brunosciaraffia3394]

@@Airbrushkid there’s 10 million dollars cars... doesnt mean that 1 million dollar car is cheap. 🧠

[@Airbrushkid]

@@brunosciaraffia3394 Yeah. But were not talking about a 1 million car are we no. Were talking about toys!

[@Airbrushkid]

@@brunosciaraffia3394 My post was about the Corally Cs-5226 servo a $69.00 servo. He doesn't have you Hoimes Hobbies SHV800 V2 servo. So why did you come to bring a different servo into this?

[@jimmyboy2778]

didnt work for me.