How to make a Cat Exercise Wheel

In this video I show you how to make Cat Wheel from wood. This will help our cats maintain proper weight.
Do your cat lacks exercise or eats too much?
Try This :)
Instagram : / noli_cat_channel
There is detailed dimension of woods on the blog.
catnoli.blogspot.com
Music - Attribution
Bongo Madness -Quincas Moreira
City Night Lights - Bad Snacks
Smokin Sticks - Text Me Records / GrandBanks
Sand Castles - The Green Orbs

[@kocbilo]

Took me 3 days to build but it was worth it. My cat now has a round, vertical, oversized wooden bed.

[@corsicawoods7395]

😄😄

[@melissaschaefer5257]

Lmfao!!

[@TheCatherin22]

Hi i saw your video of the cat wheel , can you tell me the measurements of the 40 wood cuts please ,🥺 sorry for my English i speak Spanish

[@rinashelvinawati]

😂🤣😂🤣😂🤣

[@dGanja]

🤣🤣🤣 Made my day

[@piro_the_cat]

this is one of the best diy cat wheels videos I've ever seen

[@ArtSMRdianne]

For anyone being inspired: Please be considerate of a cat's back when making one; the wheel's diameter should be big enough so that your cat's back won't be arched while running. Otherwise they might injure their back!

[@oldfishi]

what is a good diameter ?

[@ArtSMRdianne]

@@oldfishi it depends on how big your cat is, your cats back should not arch when they walk or run. Ideally it will be at least 120cm ø

[@jenniferheller6766]

I've read the inner diameter should be 1.5 x the length of the cat.@@oldfishi

[@jeanettecervantes4693]

I really think I can pull this off. So far this is the most practical DIY for cat wheels I have seen. Thank you for posting it! Would you mind sharing the dimensions for the wood pieces?

[@noli]

Thank you for watching my video :). If you are satisfied with the video, please subscribe and like The size of the cat wheel is 1150mm in diameter and 390mm in width. I just made a blog. catnoli.blogspot.com/ I will upload detailed dimensions today for you. Read more

[@jeanettecervantes4693]

@@noli yess , thank you so much! Just subscribed 👍

[@denigrif3]

I think there was a problem with that site...Ppss it is just a mobile issue. Are there also building instructions? Ty

[@RyuichiSakuma13]

@@denigrif3 Its all there, I just looked at the whole thing. Did you click on the link for that blogpost?

[@ermioni22]

@@noli great work . I just checked the blog but it doesn't load or interact to any post. Is there any other way you can share the details please?

[@irandom419]

Only change I'd make would be putting screws thru washers to help distribute the force on the carpet, but that is better than anything I could make.

[@scr5217]

Este es, sin duda, el mejor vídeo de como hacer una rueda para el gato. Muchas gracias!!

[@alisonjetmar6554]

NoLi - you are a master. I love your videos and this one especially. Even if I didn't have 2 cats I would be watching. I know a Amish man who does wonderful woodworking and am hoping to present this plan in order that I have him make me one of these. The reviews of the ones on the market basically state "don't waste your $$". I appreciate that you included demos on how to get kitties interested in the contraption! Master Cat Toy Creator - NoLi! Thank you for the plan and demos.

[@joezappie]

If you have a router, make a cheap circle cutting jig from some scrap MDF. In mine, I made a 1/4 groove and used 2 layers of 1/8th hardboard glued together. This was faster and easier than gluing screwing all the individual boards and it creates a perfect circle. Hardboard is extremely flexible. All in, $54 for 3/4th 1 sheet of MDF, $14 for 1 sheet of 1/8 hardboard, $17 for longboard wheels/bearings and < $20 for other various hardware/glue. You can make a simple stand with less than two 2x4's. All in you can easily make one of these for $100 + time. Better quality than a commercially available one. From what I've seen the $150 ones are junk and only start to get okay at $350 up to $600. There's a lot of comments saying its cheaper and better to buy, but I'd disagree if you have even just a couple basic tools.

[@robertream6571]

I love it I think it looks very cool. if I were to use that design, the only thing I would change is I wouldn’t leave gap’s in the carpet. I think by leaving gap’s in the carpet it makes it more difficult because they’re concentrating on missing that gap instead of concentrating on running full out. Great video keep it up .👍🏻

[@doves1pellegrino199]

You did such a good job. Thank you for sharing.

[@noli]

Thank you for watching my video :)

[@Christynmaine]

Thanks so much for this! Vet says my two cats must lose weight and this looks like it will really help. Now to get this built . . .

[@noli]

Haha, your cats are as fat as Noah. I hope your cats love that you make. Thank you for watching my video :)

[@soul-searching6029]

Wow, really nice wood work.

[@tutosapm]

Excellent work, thanks for sharing.

[@cassandracousineau1945]

Totally need to do this. My cat needs the work out.

[@migmagingenieria]

Great vid and design. Thanks a lot for sharing!!!! 👍👍👍👍

[@faithfriedrich3357]

Looks super. I really want to make one.

[@irema2012]

Genial,muy bueno,gracias por compartir!!

[@ceciliavillacortasolari4166]

Excelente, muy buen video. Gracias. saludos desde Lima-Perú

[@noli]

Gracias por ver mi video :)

[@sinnaali3500]

Thank you so so so much for sharing I think is really worth stay blessed ❤🥰❤👍

[@TejasToolMan]

very cool, now I have something to make this weekend

[@angienormand2427]

Nicest DIY Cat Wheel I've Seen. Great Job! :)

[@angelicdreams3491]

Nice! Looks sturdy and safe 😻💜🌹😻💜🌹😻💜🌹😻💜🌹😻🌹😻

[@noli]

Thank you for watching my video. Try to make it :)

[@tanjetten]

You have inspired me to become more creative cat owner. One of my cats has similar tail to Noah's and he is a tuxedo cat too!

[@noli]

No doubt your cat is very cute. It would be fun to meet Noah with him. Thank you for watching my video :)

[@Prousi]

Cat life hacks🙀 AMAZING!!!! 🎉 🎉

[@noli]

Thank you for watching my video :)

[@Prousi]

@@noli you're welcome ❤️👍

[@natb007]

Thank you very much!

[@lpskitten9599]

Impressive!!!!!!

[@eelast]

This sturdier than other alike concept but with cardboard video, i'll try to make it with my husband thank you

[@noli]

Your cat will like it very much. Thank you for watching my video. If you satisfied with my video, please subscribe :)

[@fortheloveofpets521]

Very cool, thanks for sharing. New friend here.

[@noli]

Thank you for watching my video. Sockie is so cute :)

[@topsigi]

정말 멋진 캣휠입니다. ㅎ

[@hi_im_Axel_the_creator]

Awwww kitty excersizing is cute dont bother if my writing is wrong i am in 3rd grade im from a country that does not speak english but i some how know it very well

[@noli]

You can use your language. I have a google translator :)

[@PUCKIxx]

thats really cool :)

[@noli]

Thank you for watching my video. If you satisfied with my video, please subscribe :)

[@micaonyx5301]

You gotta love KZbin. Ok challenge accepted, I CAN do this, goodness knows my fat spoiled fur babies can use the exercise, great video thanks.

[@noli]

Thank you for watching my video:)

[@kckaia9134]

Did you build it, and did it turn out good?

[@tiffanyhackerspace8377]

Nice design!!!

[@noli]

Thank you for watching my video:)

[@tiffanyhackerspace8377]

@@noli New subscriber here! Thank you for your great videos :-)

[@noli]

@@tiffanyhackerspace8377 Welcome to my channel :)

[@savagevalky6966]

My cat wouldn’t exercise he would sleep in it

[@noli]

Haha, he needs Lizzy ")

[@camillanordlund9906]

120 cm diameter , is good for The cats spine and running stretch out

[@noli]

Yeah,the bigger diameter, the better for cat. But the weight should also be considered. Thank you for watching my video, If you satisfied with my video, please subscribe :)

[@denigrif3]

Where are the instructions? They weren't on the blog

[@badger1296]

@@noli Your video and above 120 cm diameter comment is helpful. If I were to make this, I can see that making the base might be problematic. What are the dimensions of the base and how did you cut the arc in the base so that all four (4) of the caster wheels will work together on the cat running barrel?

[@zagarick]

Good job! Maybe think about gluing cork or rubber on the outside surface to reduce noise and vibrations

[@amriette3041]

Instead of making it for my cats, I might just make it for myself.:)

[@noli]

Haha, you need a manwheel lol

[@amriette3041]

@@katherinepearce4189 Well yea...I have one dude, this looks more fun then a treadmill does:/

[@piotrnapieraa5422]

Super ❤️🐾😻❤️🐾👏

[@aliguerrero7991]

exelente

[@Solomon0424]

Cute kitties

[@noli]

Thank you :). The cat in your photo is so cute!

[@Solomon0424]

@@noli Thanks!

[@naomifayevermeulen5037]

Super nice! Do you mind giving the measurements?

[@kevinbro]

👍 i also made one thanks for good idea 😁

[@noli]

Thank you for watching my video. I am your 999th subscriber :)

[@kevinbro]

@@noli i love it :) thank you so much for your text i will keep make a good video so we can keep in touch:) good luck :) lol

[@franciscomiranda7288]

Great work it is posibilite that you post de plan please thks again regards from Chile

[@ltfmel]

Hello there from the Netherlands. ...looooove you vid !! Thank you !! Could you please upload a vid of where or how high / low to place the rollers between the wood

[@noli]

Thank you for watching my video :) I've got more info on my blog. But the position of the roller depends on the size and height of the roller, so I can't decide. It is best to adjust the diameter to the catwheel.

[@jorgeignacioguzman4933]

Hello nice video. But the dimensions? Please 😏

[@venusvalera8692]

You should sell this as a kit I would totally by it

[@paulobolmon]

I really love this design, I want to try to replicate it, woud you be so kind of sharing the dimensions of the tiny boards, the materials, I read in other coments the size of the weel is H130cm by W 35cm, Thanks in advance!

[@noli]

Thank you for watching my video :) You will find more information on my blog.

[@maxzeblade]

old but just use sad paper make the out side really smooth and be better

[@home-space]

I am going to try building this. I was going to buy one, but the shipping was more than the product, so far too expensive.

[@arishaish8321]

love this..how much it cost?

[@ivyhertzel6513]

Hi great just

[@minchilinetoydogs381]

Fuuuuck. I'm doing this one today. Thanks!

[@noli]

Good! I hope you try to make a smaller one. It's too big for my cat :) Thank you for watching my video. If you satisfied with my video, please subscribe :)

[@sharannbray6513]

That was easy, nap time.

[@noli]

Maybe you have a good skill :)

[@sharannbray6513]

NoLi I couldn’t make that, I’m not handy at all, but I think I will buy one. Great idea.

[@noli]

@@sharannbray6513 Your cat will love it :)

[@mrHarry-ng6df]

представил звук этого адского изделия в четыре утра

[@Visionery1]

Nice concept, 2:02 but I can imagine this being quite noisy, especially at night.

[@amphindian]

Nice video and your site had instructions! How much did it cost for materials and where do you get urethane wheels? What size are the wheels? And how do you find support for the wheels?

[@noli]

Thank you for watching my video :) The cost is as follows. It's expensive..I want to find a cheap material. 1. Wood costs $ 90 and cutting costs $ 50. : If you are in an environment where you can cut woods, you can save cutting costs. 2. Urethane wheels used 10 to 5 dollars each. : There are cheaper wheels, but they can be noisy. 3. Cat carpets are used 5 for $ 7 each. : If the cat is familiar with the wood, it is okay to have no carpet. I bought the urethane wheels on this site. (2.5 inch wheel) But it's a Korea site so it's hard to buy for you. smartstore.naver.com/aimall/products/111763159?NaPm=ct%3Dk9792q3z%7Cci%3Dcheckout%7Ctr%3Dppc%7Ctrx%3D%7Chk%3Ddd82e7068cdb77124741e00c740ed072429cd2dd

[@amphindian]

@@noli what size are the wheels? The site you put is in Korean and had over 260 wheel sizes. They also don't ship international

[@noli]

@@amphindian I bought 2.5 inch industrial light weight caster. I think it would be better to find a similar size in the sites you can purchase at.

[@amphindian]

@@noli I'll look into it thanks!

[@bluesharp59]

No the cat didn't event the wheel but its was fun watching them lol. Great idea you did.

[@noli]

Thank you for watching my video:)

[@bluesharp59]

@@noli You are welcome.

[@merryweatherflowers]

Where did the big round outside frame come from

[@noli]

I used a shop that cuts wood. Thank you for watching my video :)

[@Yukon.72]

How about changing wood planks for something like pvc? If you heat pvc you can make perfect circle with it and it will weight a lot less then wood planks

[@noli]

It's a really good idea I want to, but I haven't found a pvc product of the right size and shape yet.

[@Yukon.72]

@@noli Try asking or checking places that make street banners or typography, i worked in one, and they have normally access to pvc and can make it any size or form, or at least say where to buy it raw

[@noli]

@@Yukon.72 I'm trying to find a product that's already been made. Custom-made products may seem expensive. Thank you for your help.

[@Yukon.72]

@@noli where i live 1m2 pvc will be less then 20$. In your case you need like 25-30cm x 320cm panel for that, which just around square meter. Already made one probably gonna cost more, because of work expenses

[@noli]

@@Yukon.72 Thank you so much for your help I need to find a pvc shop around me.

[@AlexReiter1988]

I want to make this

[@msbuttercup2073]

Hi, what are the wood dimensions? What type of wood, supplies that's strong enough to hold it together. Thanks.

[@Keepintouch143]

You are really pro. Are you in cat business. I think i will try to make one with small size 1.25feet radius wheel 2 5 feet diameter

[@vdsmade]

🧔👍

[@kyrabell6216]

Great video :) what would you say was the cost for supplies?

[@noli]

Thank you for watching my video :) This is not a thing to supply elsewhere, but the cost included is as follows. 1. Wood costs $ 90 and cutting costs $ 50. : If you are in an environment where you can cut woods, you can save cutting costs. 2. Urethane wheels used 10 to 5 dollars each. : There are cheaper wheels, but it can be noisy. 3. Cat carpets are used 5 for $ 7 each. : If the cat is familiar with the wood, it is okay to have no carpet.

[@godzuki2099]

Kinda looks like r= pet length, does that sound right for diy?

[@d0ck3r1]

Hey this so cool do you mind telling me how much do you spend on this material pls

[@noli]

Thank you for watching my video :) The cost is as follows. It's expensive..I want to find a cheap material. 1. Wood costs $ 90 and cutting costs $ 50. : If you are in an environment where you can cut woods, you can save cutting costs. 2. Urethane wheels used 10 to 5 dollars each. : There are cheaper wheels, but it can be noisy. 3. Cat carpets are used 5 for $ 7 each. : If the cat is familiar with the wood, it is okay to have no carpet.

[@dang2443]

@@noli So that is $275, not including all the time (and wood glue and a lot of screws). You can buy a new one for less than that.

[@kendallevans4079]

I'm trying to keep mine under $100....I think I have all the materials ready and I'm at about $83 ready to start.....Might need band-aides, I'm not that handy with hand tools!

[@chadandwendy1]

@@kendallevans4079 Way cool. 89 $ sounds reasonable, too. How did it go ?

[@MrSharesky]

@@chadandwendy1 Not too good it seems...perhaps band-aids weren't enough?

[@TheUnapologetic1]

How much were all the supplies? If under $250 might just be worth making.

[@shawnio]

at the beginning the cats like what the hell is this lol

[@satman1w]

oh, and the rings you can buy at pottery barn...

[@ayamecosplay6129]

what do you call that circular piece of wood? I can't seem to google the right thing to find it and buy it

[@noli]

I ordered it from a shop that cuts wood.

[@liangchristina7919]

Where do you get the round bit of the wood

[@noli]

I used a cutting service for the big round wood. I can only cut small woods yet.

[@lnxjenn]

Is there a formula that allows you to calculate how big your wheel needs to be vs your cat's size?

[@noli]

There is not. I made it a little bigger than what I saw at the pet shop.

[@jcepri]

Carpet is a bad idea unless you keep your car's claws trimmed. Otherwise their claws can get stuck while that have a good clip going and they won't go back on it.

[@dang2443]

for the amount of money spent on that (not to mention time) you could just buy a pre-made one. It would roll more smoothly and not have gaps in the carpet/surface.

[@noli]

Yes you are right. Pre-made product quality will be better and the price will not be much expensive. I Recommend for those who have extra wood or want a special size catwheel.

[@noli]

Thanks for watching :)

[@dang2443]

@@hino823 Nope. Less than $500. And he already explained it was more than $150. BTW, you might notice that the guy who posted the video agreed with ME!

[@Yahootie]

Cats get bored of toys after a bit. Afraid to invest the time and money into this to have my little guy say, “meh” after a few hours. It’d be cool if you could rent one.

[@noli]

You are right.I am making several cat toys, and sometimes I am disappointed when the cat gets bored soon.But there are a lot of times that cats like it and the process of making it is also fun so I will continue to do this. Thank you for watching my video :)

[@deborahwalker6474]

The use of a laser will keep your kitty interested..

[@SterlingSimmons22]

Could always sell it and make money if they don’t end up liking it

[@Feydakin88]

J'ai fait la même avec deux roues de velo, plaque de metal avec rivet, tapis coller a l'intérieur et un vieux skateboard pour les roues. 30euro max

[@getbuckb4u]

How do I determine the dementions? By the base or size of the wheel. I tend to overthink my projects, and basically my mind gets to the point where I don't understand anymore because I've somehow decided that it must look like one of the 7 wonders of the the world🤦🙄

[@patrickhebert7966]

Hi, this look to me like the best DIY cat wheel, i'm looking to make one but can't find wheels...anybody can point me to some good one please?

[@Whitecloudjimca]

Can’t help but wonder if making this cat wheel vs. buying the original is actually cost effective. Anyone care to share the total cost of materials? If cutting services were used please add the expense to the list. One more thing, what hand and/or power tools are used in making this cat wheel?

[@robduckworth9616]

Where do you get a wooden ring like

[@felishaortiz3403]

What kind of wheels did you use?

[@elisavivero5183]

Hi which are the measurements for the inside? I dont understand anything on the blog sorry :( I want to make one for my fatty cat

[@bluesharp59]

Very nice and I subbed you from this channel also. Thumbs Up and have a good weekend.

[@noli]

Haha, thank you so much. Welcome to my channel :)

[@bluesharp59]

@@noli You are welcome.

[@Yogamannn]

Where u get the circular wood?

[@l0llip0p16]

Just like a hamster or Guinea pig.

[@michellepalmer5283]

What are the dimensions and weight? Would you change anything? Can you make it smaller?

[@ArtSMRdianne]

Please be considerate of a cat's back when making one; the wheels diameter should be big enough so that your cat's back won't be arched while running. Otherwise they might injure their back

[@JamieLuv2u]

I live in an RV. Do you think a smaller/thinner version is doable? I am going to post it to the cat RV group, so other people will probably ask too!

[@noli]

Considering the size of the cat, you can design a smaller catwheel :)

[@adelehorn2055]

And where do i find the round wood

[@msbuttercup2073]

Hi please share the dimensions of the items you used. Thanks!

[@running4fun863]

Yes all this is great but I cannot find the circle part , I have the insides. anyone can tell me where I can get the circle from.

[@anrihoferts8095]

Hello, what is the diameter of the wheel? I would have made plain from the strip, sawing to a depth of 3/4 12mm veneer, which allows it to be folded and prepared and glued pieces.

[@noli]

Its diameter is 1030mm. I hope you make a nice catwheel.

[@anrihoferts8095]

@@noli I haven't decided yet if I need it, but to make it, yes there will be no problem with it, because I am a carpenter, I mostly work with plaster, a cat tree has been made :spoki.lv/praktiskais/Budzeta-kaku-maja-jeb-ka-es-pavadiju/899020 of course, when making their rings from whole veneer, you need to put the smooth side against the wheels to be quieter and you can use roller wheels with better bearings will be quieter

[@colonelquail3993]

Can I just buy it??

[@TallTim327]

More details on how you built it

[@stephanienarbaez5034]

How did you get the round side panels

[@noli]

There's a shop that cuts wood near my house

[@purito540]

What is the name of ur caster wheels and whats the total weight of that cat wheel?

[@babydolljones77]

Where the heck do you get the circle shaped piece of wood??!?

[@noli]

I used a shop that cuts woods.

[@nidhiG999]

On your blog, the dimensions in the diagrams on your blog....there is no Unit mentioned....are the numbers in mm? what is EA?

[@soniccosmonaut]

I couldnt find the dimension on the site

[@sagansrun2932]

Oh your blog you said to wrap the wheel like a rubber band then it will run smoothly. What do you mean by that please? Can you give better description .

[@noli]

Thank you for watching my video:) This catwalk is not a perfect circle. It is a 43 square shape made of 42 pieces of wood. It may not be move smooth due to its edges.

[@noli]

But if it is made very sophisticated, it will move smooth enough without rubber.

[@penniesachs4930]

Can I buy one from you, as I am not as handy?

[@mariedejean9061]

Bonjour, ou avez vous acheté les roues ?