I made a Deathclaw floating in a Cloning Vat

[@Bbeaucha88]

The yellow leaching into the resin actually looks awesome in my opinion.

[@WillusKenny]

I think so too, it makes look like its almost glowing a little in a sense

[@chalkietigger4650]

@@WillusKenny or it looks like the weird radiation stink effect you get in parts of fallout 4

[@Da-choppa]

@@chalkietigger4650yeah like that one cabin with the ghoul doctor in it

[@WillusKenny]

@@chalkietigger4650 i dont actually play fallout so i have no idea what you're babbling about

[@TVEmme]

agree

[@cyberra0180]

The leeching actually does look good, like the chamber has been left sitting so long it's starting to fail. Whoever stumbles into that science room had best step lightly

[@WarFoxThunder]

FR

[@ultimatewitcherfan6677]

Yeah… one wrong move and you could accidentally awaken deathclaw… or worse…

[@crcronin1]

Could you make realistic Tom and Jerry?

[@12inchcharge38]

Amazing idea!

[@cfb0677]

AWESOME

[@kristajones7202]

I love that, with a wall between them with a mouse hole

[@Yuhuhnuhuh]

Yeess!

[@Roguegirl666]

You could also make Spike, Tom, and Jerry hitting each other. Always a classic.

[@berrie-nice-to-meet-you]

The yellow leaching out adds to it, I'd say. Like it's dead and slowly decomposing, it's not frozen in time.

[@Anxiety_Creature]

Babs is gorgeous, darling. Her creepy science bath looks a little grungy though tbh. Really cool build as usual!

[@immagical7036]

Rarity?? That you??

[@beanhavok2287]

I think the bleeding off of the colors actually works! Nice job!

[@Kittinthehatlady]

It just works

[@_theautisticpanda_1836]

Ah yay! Yet another cursed creation for us to enjoy! Side note, You have truly inspired me in my paintings Adam, my imagination is more cursed than ever before and I'm very happy with the resulting paintings.

[@dragongaming2286]

👍

[@Dinoshadow6]

Yeah he brought me back into art and I've been much happier

[@ni-dirus]

That melting color looks badass though, it works super well with the alien vat energy. You could take advantage of that effect in future builds!

[@connorerb2338]

This is one of your best sculptures yet when it comes to the clay form you made. That is such a good anatomically relaxed gesture with a very impressive amount of detail and visual interest. It's like high end production figure quality. Your ability do do something like this every week is astounding, just be careful not to overwork yourself.

[@lasica0]

I love your channel and I'm from Poland. I'm kinda glad these acrylic sheets don't contain any polish 😂

[@amuu8936]

Or any polish remover 🤔

[@3DPlasticFantasy]

This project turned out nice and smooth. A fallout vault boy with power armor or fat man make a nice diorama.

[@arcane_sigil_01]

Why not both? Or all? "Giant" Vault Boy statue with a power armor wearing, Fat Man wielding survivor looking all heroic with one foot on a pile of dead Ghouls and Raiders? Or one foot on the back of a dead Deathclaw.

[@NorthoftheBorder]

I thought of a suit if power armor then remembered how long the space marine took and he's got roughly 1/10 the finicky little details...

[@JasonWhite-g4q]

@northoftheborder that's half the fun of it!

[@Ydhyctr]

1:43 ​@@NorthoftheBorder

[@phlagenjoyer]

@@NorthoftheBorder 2:23

[@lauxo36]

My stress levels when you do resin are so high. Seeing you put this beautiful creation into a mould with “resin disaster” foreshadowing is so terrifying 😂

[@PixelatedPixelz]

Fallout has a special place in my heart so I was so stoked to see a deathclaw! It turned out amazing, as always! 🔥🔥🔥

[@Bos_Sentinel]

Haha 111 likes

[@mineority6310]

*"Pro Tip"* If you ever want to make a masterpiece but don't have the skills to do so, just squish the ever living snot out of a block of clay and you get a "one of a kind" Deathclaw!

[@panjack_]

Gotta start somewhere, why not just have fun in making something instead of trying to be perfect!

[@dominichayden-dade]

​@@panjack_feel that that in art and exercise, find sumn you like making or doing and enjoy it, ya stick to it more and youll remember it as sumn that you have fun with and can become a stress relief

[@Digotol]

He’s just a little special

[@meapcat_]

They’re just built different

[@BatuhanBerkol]

The color leach actually looks cool, like her aura or something.

[@Deehydrate]

Gives of kind of an aura

[@steprockmedia]

I think it looks like it's old and disintegrating or a layer of skin has sort of flaked away.

[@Dargonhuman]

@@steprockmedia I was thinking something similar. I've seen very old items in formaldehyde that had a similar subtle cloudy look around them as the objects start to dissolve in the liquid.

[@Da-choppa]

Oh my fucking god I’ve been a fallout fan my whole goddamn life and this, THIS is one of the COOLEST models I have ever seen, this thing is beautiful!

[@SSebstan]

Things like the subtle pause at 2:24 is why I love your videos lol

[@GranttheGreat_BOTTOM_TEXT]

It’s called the end of a sentence.

[@PixelatedPixelz]

@@GranttheGreat_BOTTOM_TEXT I’m crying 😂

[@SSebstan]

@@GranttheGreat_BOTTOM_TEXTthe pause is just slightly longer than normal, it’s not just the end of a sentence

[@marshawargo7238]

Perhaps the end of an era...

[@jessicademartino5781]

It's like, ok what is gonna go wrong now? Kind of pause

[@daeshawnosbourne]

All it took was 1 video and I’ve been hooked ever since. KEEP IT UP !!!!! I love how you make everything without drawing it out 😮‍💨 THATS PURE TALENT !!!!

[@AFarmerCalledChicken]

The yellow leaching in looks really cool with the backstory of the piece! Great work, Adam!

[@trans_wolf3597]

The utter surprise when I saw that you sculpted a deathclaw made me so happy!!! Fallout is one of my favorite game series!!

[@yeahflipz]

the yellow wash leeching into the resin looks way better in my opinion.. looks like radiation emitting from her skin. Deathclaws are usually found in the more radioactive areas of the world, so to me it's like the stars aligned for this build. 🔥

[@mogusisfunny]

Me being a gen Alpha kid, I have nostalgia for Fallout 4 and Skyrim because my dad would play them. It's great that they're coming out with a new show, and your model looks terrific!

[@Wrixchanger]

You could say Adam "killed it" with this deathclaw

[@Fentlover1]

Wrixchanger3985🔛🔝

[@Cerothus25]

Adam posting on my birthday was the best gift I could have asked for! Amazing work, as always. Can't wait for whatever nightmares come next!

[@StudsonStudio]

Oh phew, you're alive. I was really worried about you last week. Someone put their voice on your video

[@chickennuggsies]

Oh your Hudsons favourite son

[@NorthoftheBorder]

Wait, what? I didn't even notice!

[@Abya_Pabya]

im so proud of how far youve come throughout the years. ive been watching you since i was a kid and its been so amazing watching you make these projects ! you inspire me man

[@NokiaSauce]

the discoloration is kinda cool

[@McTacoDelight]

Your painting skills are seriously improving. I know this is more of a sculpting/comedy channel, but there's no discounting your paint job on Babs. Top shelf, old bean!

[@sour273]

Imagine what an honor it would be to become a tiny nerdy thing

[@SigmaSpecialist]

A horror, and yet an honor 😌

[@infpdreams]

IDK, I was that in middle school and it sure didn't feel like an honor.

[@AshleyAmbrose94]

BABS? I love her so much!

[@ZenithKamiBlackwings]

Deathclaws!!! Awesome!

[@Kittinthehatlady]

Yeeees! Fallout, particularly 4, is very special to me (pun not intended). I've been waiting for Adam to make a Fallout creation!

[@chrissycroft5099]

The discoloration /bleeding of the color works in this particular scenario if you ask me. Like Babs have been in that chamber so long the skin is slowly started to decompose because of the old, faulty tech not able to work any more and keep her stabilised. Oh and that corner with the resin mark? Can't you fix it with some UV resin carefully poured into that crevice? Sorry for any mistakes, not my first language, love your videos!

[@laurelbaer1]

Very cool. You make sculpting look effortless.

[@egg0534]

Oh man, how much I wish you did some obscure Ben 10 aliens!

[@tymothyyoung1530]

Oh ya, be super cool. My daughter is 19 now, but when she was about the ages of 6-10, Ben 10 was her thing, and green was the best colour ever. Be quite nostalgic 😌 for me, and I love to send her those videos 😅.

[@TheRealestWhy]

I eat egg

[@hexn72]

the physical reaction i got from you sanding i love everything you make though you always do a fantastic job and really give confidence for a hobby that can initially seem super overwhelming

[@EnderDragon5655]

This has to be one of your best works yet 😊

[@Skyrimfruitsnacks]

The yellow in the vat actually looks great, and makes it look more like it would in a fallout game, such as the vats in the FEV lab. Overall this is definitely a 10/10

[@justanorange6599]

looking forward to the Cazadores and doctor Borous, anything big MT related would be killer though

[@PepeAndDoge]

I absolutley love how it look's like, in the dark and when you can see all the details of the chamber!

[@Ri5olu]

Hey, who's this? This ain't the guy from last week!

[@dionehill1384]

I enjoy all of your videos and in my opinion your brilliant. I'm also glad to see that your making your sculptures as naturally as possible....I find 3D printing awesome. Yet alot of artists seem to be relying on them more often than not. I appreciate your work immensely and applaud your talent.

[@MrLemonIII]

I would love to see a xenomorph or queen xenomorph sculpture. I think you could do some really cool lighting effects with the flamethrowers! Keep up the good work Adam👍

[@stevehumm1678]

Love the rust! Looks rustier than real rust!

[@sshhrroomm]

hey adam! i absolutely love your channel! you’ve inspired me to make characters that you make!

[@Nernage]

Adam the sculpting is amazing on this, and it turned out awesome

[@Lubble-]

I got a challenge, but obscure but in Darksiders 2, when you're hit by an ice enemy you get imbedded in big shards of ice, it's cool visually, maybe you can make a model based on that, it would be challenging to make Death and the ice look like ice too

[@AedanTheGrey]

Darksiders is such a cool series

[@Lubble-]

@@AedanTheGrey it really is, I'm going for the platinum on 3 now

[@Michelle-up6dl]

I just have to add on to what everyone else is saying: the wash bleeding into the resin actually looks really cool. I had such high stress at first but the finished project looks amazing, as always. Keep it up!

[@sparkyprojects]

Looks like you wired the led's in series, for low voltage you should wire in parallel An led generally runs on 2.5-3v, though some work on lower volts, i'd say yu were lucky to get yours to light, especially as you also had resistors in series

[@louisvictor3473]

Kick ass as always!! Now, I have been thinking. Instead of resin for projects like this, how about using a transparent container and actual liquid inside? Not water, that is too runny and too leaky, but perhaps something thicker like a thicker mineral/parafin oil, or even thicker like clear corn syrup, so it is easier to make it leak proof. I suggest those two because they are cheap and easy to get, they don't really go bad (though you can always replace if shit happens), and their index of refraction is similar to that of fishing lines and acrylic iirc, so there is a good chance that whichever you use to support the model inside the liquid would become effectively invisible.

[@MisterGames]

Then he needs to deal with dehydration as the container would need to be airtight. Glycerine might work as a liquid, but that might just create too many other issues to overcome.

[@louisvictor3473]

@@MisterGames What other issues are uou think of, besides needing to either seal it or make it refillable, which are both not much of a challenge?

[@MisterGames]

@@louisvictor3473 while making air tight and or needing to refill it are not deal breakers by themselves, they add extra maintenance to the thing. Sure, doing this for one or two is no biggie. But if you have to refill 15 or 20 of them, it begins to be an ongoing chore for what was a done and dusted project. Also, as photoowl time-lapse channel shows, sugar liquids always get mold on them.

[@louisvictor3473]

@@MisterGames You're talking as if you have to refill it frequently, which you wouldn't, it is the backup plan. How often does a lava lamp needs refilling? How long until a sealed bottle of corn syrup or glycerene or alcohol gel, or mineral oil, etc visibly go down in level? Even a terrarium doesn't require its water refilled, and that is literally just plain water. That is why you seal it, so the slightly raised pressure created by any evaporation prevents furter evaporation, as well as ensuring the liquid stays in so that when it cools down and condescenses it just joins back up. You also seem to be thinking of sugary liquids that are mostly water rather than the other way around, and kept in an improperly sealed container that allows too much fresh oxygen in. Molds are obligated aerobes, so a completely filled and sealed container would suffocate it, as well the absurdly high concentration of sugar that is too much for them to survive in. And of course, you could use a non sugary liquid like mineral oils, clear neutral liquid dish soap, etc.

[@thephantomdragon]

Loved watching this with my Terry plushie!!

[@CheezerTheGrate]

I see Adam is a Deathclaw enjoyer too 👌

[@theRealTurboChargeTV]

i have loved your channel for a loooong time and making a deathclaw has just made me love your channel even more. this is amazing. thank you.

[@DaisyzCreations]

I’ve been subscribed to this channel for a while and I absolutely love your videos! Funny and super impressive, keep up the awesome work :)

[@joker31freak]

I feel like your sculpting skills improve each project, insane work again dude!

[@Jaknoof1234]

I think a good idea is to do either something from ultrakill or pyro from tf2 (Both my favourite games)

[@DCParrot]

watching this after 3 days of hiking and camping is cool

[@kutanra]

Soonest I've come to one of these. I have mixed feelings about both the upcoming show and what the journey of watching Adam's video will do to my psyche 😂

[@EnderTheGal]

this dude is my favorite clay person maker, cause of how accurate he is and how the clay figurines look so similar to the games and stuff they come from.

[@ArmundJay]

She's so pretty 🥺

[@maxs-lz4pn]

One day he'll have a perfect resin project that doesn't go away in any way, one day

[@giacomo2819]

Cool idea ima start watching

[@dedricklewis7168]

Ive been watching your videos with my daughter for a few months now. And because of you, she was inspired to make a M&M eating a small human from clay.

[@darcon5836]

You can use that color leeching effect for other things like radiation leaking into somewhere it shouldn't or algae build up on rocks underwater.

[@quinnhindley9512]

Your transitions are so clean and satisfying. They honestly make me so happy.

[@lucax9318]

please do more resin art 🙏

[@cobblerama]

After SO many hours of foraging through the wastelands, running from or zeroing in on deathclaws, it was kind of surreal to see one created from clay.

[@KaijuRamen54]

Adam is such a glutton for punishment doing even more resin projects 😅

[@YepIm_C14]

You are my favourite clay artist. Love your work! ♥️

[@JulianSkrz]

Fallout is taking everything just as atom intended

[@Flesh-wl7bb]

GLORY TO ATOM

[@JulianSkrz]

@@Flesh-wl7bb indeed brother of atom

[@Soapeateatyum]

Fallout is something special to me as it was a way to connect better with my mom since she loves the game. We were going to watch the show together when it came out ❤ I jumped in joy when I saw one of my favorite creators making one of my favorite creatures🎉

[@micmen1496]

The discoloration kinda looks like radiation, so i think it's fitting!

[@W._Langman]

Omg, excellent😍 I can't wait to start watching. God, I hope they've not made a hash of that too. I can't really see how they could ruin it, but only time will tell

[@rody3199]

Hey

[@Jaknoof1234]

Hi

[@ikekiefer4556]

Onion cultists.

[@NightRhino11]

Why…^^^

[@Ryo5464]

Lumpy chicken Cobb

[@atasoy]

Great work ❤, I have a question, how can we prevent acrylic paint from flowing and disintegrating due to the effect of epoxy?

[@PresidentLobster]

“Tampering may lead to loss of life” bro is more honest that my mom

[@KB-er3ii]

Babs is AMAZING, i'm always blown away by your talent! (based on the thumbnail I would have guessed it was a real Bethesta 3D print that you added resin to, but WOW!!!)

[@navydraws_1413]

The lack of Polish is a true tragedy

[@odalyssanchezarmenta444]

Beautiful imperfections make art more valuable. They add character, embrace it 💙

[@selinesbeau]

The paint leeching is just her radiation floating around her.

[@ashketchum2574]

She looks sooooo cool in the dark! Love it

[@edgelord3751]

hell yeah. maybe try making the master? itd be call

[@JulianSkrz]

Or centaur fallout 1

[@dracoface7227]

I like the crack in the resin cast, adds to the fact that babs could emerge at any second out of this ancient test facility. Definitely plays into the wear and tear very well.

[@Matthew_Lawless]

Could you please learn that you don't need to pour all the resin at once? You can half fill the mold with the model supported and then remove the supports when the bottom is cured.

[@HobbyWorksbyRani]

i agree with the other comments, the leaching actually became a happy accident yielding an unintended satisfying effect. you may want to consider using strong wires made to look like those monitoring cords into the creature for when you make another floating creation instead of the nylon.

[@severalkorveks138]

I usually hate those imperfections, but your presentation makes me love it

[@samanthadean1083]

Awesome job!!! ❤️❤️❤️👍🏻👍🏻👍🏻 Glad to have you back!!!

[@dirtywhitellama]

You had me nervous about the resin pour, but it turned out fine. The slight haze from the washes could plausibly be intentional even. Great work on the sculpture and neat idea.

[@eros5420]

This looked great! But if I could give one suggestion I would recommend not forgetting to clear coat.

[@baxkat92]

Adam! Your sculpting is amazing!

[@Thatsalmonman]

Adam,your content is the reason i started modelling.Thanks fpr being great and keep up the great work👍👍

[@EmilyNaumer]

God, the deathclaw shape is just the Perfect Shape. You captured it so well lol, cheers!

[@StaySafeDontDie]

I keep saying it but you keep getting better at sculpting. Babs turned out so good and it was so much fun watching her come together. :)

[@SabakuNoShi]

Very cool idea! That yellow doesn't look to bad for this diorama. And about fishing line - try to set those in vertical position next time [90' angle], should help 😉 Overally good job here 😁 I really like how it looks when lights are turned on!

[@damonturnbull5903]

I love Babs. I love the way you work out the voltage or whatever it's called. I peed myself laughing at that. This and the episode where you cut your hands up making the wire tree had me in fits of laughter. Thank you Adam x Bless your cotton socks.

[@Stratelier]

Honestly, the top piece of the vat does a great job at obscuring the fishing line from view.

[@chastitymarks2185]

I got my Terry-plushy in the mail today and I love it! Thank you so much!!!

[@melindastevens46]

I’m sad to say I don’t know Fallout but this is incredible. Almost as incredible as my TERRY PLUSH I JUST GOT! Thanks Adam for giving us all a little Terry in our lives. May he continue to make appearances for a long time.

[@shlimon7667]

Absolutely love your scripts man. I always do. Such satisfying and entertaining wordplay

[@MrAssex]

I love how he just gets into the video instead of blabbing about what he's going to do👍