My xbox is the first one in the video and was fixed perfectly. Really recommend these guys!
@0101Virus4 жыл бұрын
I think my Xbox 1X has the same issue, how much does this kind of repair cost? If you don't mind.. He deff knows his stuff xd
@El-Fartomatic4 жыл бұрын
0101Virus 140 as long as you havent opened it up.
@tobiasmangoma95664 жыл бұрын
Thanks for appreciating his hard work.
@evieblackburn72873 жыл бұрын
@@0101Virus it was about 125 i believe
@YoureWrongImRightGetOverIt3 жыл бұрын
how do u know what one was urs? no offence but do u know what the board in ur xbox one x looks like compared to the other one X xbox boards?
@darkgrey17904 жыл бұрын
You inspired me to pull my soldering iron out and for the first time in four years I repaired a charging port. Thanks man.
@darkgrey17903 жыл бұрын
@@shoban With old electronics. Try removing caps and other components. Then put them back. That's a good start.
@jaydee36812 жыл бұрын
@@shoban get an old xbox360
@richardstone86152 жыл бұрын
I started with a x box 360 fat
@teleboyyuson89874 жыл бұрын
Finally after months of watching, I get to see BIGBOSS! What an amazing team! Thank you for all the videos I learned a lot. Including patience in dealing with things.
@sharfazhameed63824 жыл бұрын
This guy is the best from vehicle key logic boards, smart phones to dental software access key usb. Total respect on his knowledge n gratefulness towards his knowledge offloaded to us
@ciprian47604 жыл бұрын
I respect you work! We learn a lot from you Salut from Romania!
@0101Virus4 жыл бұрын
Mad respect for attempting that second console, you did more than most would have..
@robp46164 жыл бұрын
"Hello, I just wanted to check on the Xbox." "Which one is it?" "The Xbox" ".........-_-"
@em0_tion4 жыл бұрын
And those are called "Functional retards" xD
@Trip4man4 жыл бұрын
@@em0_tion Not really. As a costumer you're not responsible for triage or logistics. How does someone know what's going on in there if he doesn't work in the building?!? If the guy doesn't give a ticket they can have 1 or 1000 Xboxes. The costumer doesn't know. So yeah he's going to say "the xbox that I just gave to you". Unless you want costumers to memorize every serial number they have on their appliances... He's not a retard, you just have the 'f you' mentality
@AntonioWengratt3 жыл бұрын
@@Trip4man I got your point, but, I have shop also, and do not harm if the customer came in and say "I want to know about my Xbox, my name is..."
@chrisconaway23342 жыл бұрын
I respect you fixing the pissed on motherboard. At every single place I've worked though, we would send those back in biohazard bags and tell them we aren't touching bodily waste of any kind from any species. You don't have to fix that. Microsoft does the same thing. They refuse to fix anything with bugs, rodents, piss, etc.
@zeroskill9904 жыл бұрын
One question: don't you have an ultrasonic cleaner in your store? if yes, then just putting it in there should get rid of any smell/dirt
@TopherToke3 жыл бұрын
Wow are you serious, pee, blood, bugs, are all Biohazards and can make you sick coming in contact with even the air around it in the case of bugs. I’m really surprised they even worked on it as most places would return as bio hazard non-repair.
@anglosaxon16223 жыл бұрын
"animal contamination" . Now I understand why you guys wear the black gloves! Maybe HAZMAT suits needed too. Danger pay ?
@therealmotherphuck3 жыл бұрын
@@TopherToke pee is Sterile
@AmadonFaul3 жыл бұрын
I would have just hosed it down in warm water, then immediately with 99% IPA from a spray bottle and let it dry standing on edge. I saved a buddies laptop while stationed in Baghdad for the war by doing this. He spilled a coke in his keyboard. Worked like a champ! The IPA absorbs the water still on the board and makes it evaporate really fast. I also let it dry overnight before reassembly.
@gary008322 жыл бұрын
@@therealmotherphuck lmao what are you talking about?
@emmojo34283 жыл бұрын
You're face at 11:42 when you're smelling the cat pee heat up is hilarious. I can't imagine how awful it smelled!
@stevelaminack15164 жыл бұрын
What was that little plugin blower you used to clean the fan on the first X-box?
@teamextreme863 жыл бұрын
youre videos are so calming lol ! i love watching them and relaxing haha
@MrMeskiokas4 жыл бұрын
I recently bought Xbox x off eBay with exactly the same problem. It reacts to the controller as I imagine it should, just no image. I managed to remove the old retainer chip using el cheapo WEP hot air station. The process was indeed very difficult in terms of time and power I had to use in order to remove the chip. Installed a new chip and the result was the same as no work done. I figured I’ve used too much heat (or the chip I got was faulty) so ordered the Quick 861DW station. My question would be what temperature and air speed are you using to solder a new chip back? BTW, Greetings from Lithuania ;)
@estebanquito3564 жыл бұрын
11:36 Man i can smell that disgusting smell, i fell like i'm contaminating my desk just by watching the video. Deciding not to continue with that repair was in my opinion the right thing to do, value yourself and your place. Really liking your repair videos
@nexxusty4 жыл бұрын
If he valued himself or his place properly, he'd have told that customer to piss off. Literally. Anytime I have a customer bring me something that can literally be considered a fucking biohazard, I first off, get angry at them for thinking they can just bring something to someone without telling them what actually happened. Every time I tell them that doing this is BS and they shouldn't do it. I then tell them there is no way in hell id work on something so disgusting and dirty. As you should too.
@fhunter1test4 жыл бұрын
@@nexxusty It is just electronics. Wash it and properly and dry it.
@frehesh.43863 жыл бұрын
@@fhunter1test lmaooo
@DenverStarkey2 жыл бұрын
@@fhunter1test if it were me i'd have dunked that board in a vat of alcohol first , scrubbed it down , dried it then dunked it in vat of lavender scented baby oil, dried it off good , then , and only then would i tried to work on it even the first time.
@fhunter1test2 жыл бұрын
@@DenverStarkey washing off baby oil from electronics (or working with it after) would be hard. Also - water first, alcohol second (to pull water out and wash what could not be washed with water), unless there are sensitive components.
@dexsters56433 жыл бұрын
To clean the PCB get some breakcleaner from a hardware store or wherever and spray the board down. That seems to get the smell mostly out and cleans the board
@tamburino704 жыл бұрын
I tuoi lavori sono di una classe molto superiore, i tuoi video mi ipnotizzano, li guardo ogni giorno complimenti davvero.
@garybenoit32202 жыл бұрын
Hi, just a suggestion as whenever I do a repair on a board, I have encountered them with all sorts of liquid spills as well as those unbearable smelly ones, I have always used 91% isopropyl alcohol with a toothbrush and that worked for me, hope that helps
@BTBAB-yj1cn4 жыл бұрын
Hi and thanks for all of your faithful hard work and dedication to provide instruction and education for us! May I please ask where you purchased your high power blower that is shown at 8:58 ? Thanks
@Snecho3 жыл бұрын
Search Google for "canless air"
@neddy12874 жыл бұрын
That power on and power off symptom is the around the cpu vrm had a similar problem before it was cause by rain getting inside the xbox one not the s or x model
@perfectpixelselectronics4 жыл бұрын
What is that bent tool you are using with the flux? I am new to microsoldering and I am having a hard time finding all of the proper tools. I have some amtech flux just like the one you linked in the description. Do temperatures matter when it comes to soldering? I've had quite a few successful jobs done without even thinking about temperature. But I want to be able to do a job like this. I also ordered the 0.1mm copper enameled wire. What is the difference between enameled and non-enameled wire? All I have right now is a weller WES51 iron with a ETS 1/64 Long conical soldering iron tip. I will order whatever I need to do the job correctly.
@arsenicjones91253 жыл бұрын
The bent tool you are seeing, depending on the shot, is either the tweezers or the hook shaped soldering iron tip. Temperatures do matter but so does the size and shape of the tip you’re using. There’s more to explain on this topic than can be covered in a comment reply. Hopefully you will seek out more answers in some of the other videos on this channel. Enameled wire has a thin coating of enamel around the wire which insulates it. Hope I helped some and you’re still learning and having fun
@perfectpixelselectronics3 жыл бұрын
@@arsenicjones9125 @Chad Rector This definately does help and thru many attempts to repair small joints I've realized it takes a lot of patience and practice lol. The console I mentioned before got a little better after I was able to repair some of the traces but I am still not skilled enough to fix it. He makes his repairs looks easy in this video. I also dont have a microscope which would be super helpful. just a magnifying glass with a light but yea still having fun and learning more and more each repair I encounter. Ty for the reply
@arsenicjones91253 жыл бұрын
@@perfectpixelselectronics I don’t have a microscope either but the skill set applies the same to older thru hole stuff like stereos so I fool around w those for fun. I bet I could solder as good as him if I had as much time practicing at the bench lol. It’s certainly a skill he has to make his repairs look so easy
@Swenser4 жыл бұрын
Have you replaced any high pin count chips such as PCH or GPU chips lately. What do you think success rate is. It looks too difficult to bother with considering the parts are expensive and big chance of poor solder connections. Do you recommend I go ahead and try PCH replacement with standard hot air equipment?
@Swenser4 жыл бұрын
Daniel Satko what about baking in oven trick. I've baked a TV main board to fix it. Would that be the better Butcher option. Or if small station is hot enough to get chip off, reasoning says it should go back on, right?
@JesusChrist-sx1lf3 жыл бұрын
Just wipe the board with alcohol like when removing flux, that should take care of at least some of the stain and smell? At least making it easier for you to work on it.
@deathtrap19764 жыл бұрын
Why not to cleanse the board with alcohol b4 start working ?
@JustMe-sq1vh4 жыл бұрын
@@waynetaylor2784 i agree
@xxycom89634 жыл бұрын
You don’t want to clean “ the scene of the crime”, before visual analysis.
@nilomyki4 жыл бұрын
@@xxycom8963 Very true as numerous components (could come loose that could unnecessarily exacerbate and lengthen a repair before being discovered (obviously that's dependant on the level of experience - so that potential issue is a sliding-scale).
@AmadonFaul3 жыл бұрын
I would have just hosed it down in warm water and maybe soapy water if it was that or throw it in the trash, then immediately spray with 99% IPA from a spray bottle and let it dry standing on edge. I saved a buddies laptop while stationed in Baghdad for the military by doing this. He spilled a coke in his keyboard. I completely disassembled the laptop and bathed it in a tub. Put it back together with fresh thermal compound. Worked like a champ! The IPA absorbs the water still on the board and makes it evaporate really fast. I also let it dry overnight before reassembly.
@CaptaIn_NAM13 жыл бұрын
I like how you work to fix things. Thanks for a great video. take care
@faruqqaderzade24323 жыл бұрын
The best youtube channel I have ever seen I have learned alot from you thanks ❤️
@Finditfixitphilipit4 жыл бұрын
that would have been a bad mosfet causing the power issue . its common with liquid damage that one of them 3 phases blows usually number 2
@jasontrewin1233 жыл бұрын
Honestly, not a electrial guy/components but he seems to take his time. Area is clean afterwards. I enjoy watching this even if i have limited understanding of what he really doing.
@leso2042 жыл бұрын
have you used your rosin solution on a repair like this instead of flux paste ?
@kevinansell93414 жыл бұрын
That's a nice little Blower you used on the Fan, What make please :)
@nigeriaemploymentopportuni79423 жыл бұрын
great vedio, please which microscope do u use?
@arsenicjones91253 жыл бұрын
The microscope is sold in the northridge fix shop linked in the description
@Anibal_avila744 жыл бұрын
Isopropanol cleaning inside the ultrasound tub, not eficient?
@melplishka59783 жыл бұрын
You can tell that that is awsome flux. It doesn’t blow away or evaporate when heats applied .
@MAKVIPER4 жыл бұрын
How much for the blower looks nice man..
@oscarmartinez84354 жыл бұрын
Where did you buy that blower?
@amal999yohannan4 жыл бұрын
Could you pls tell me what type of blower used in this. I am looking for a small battery/cord operated blower. Purpose is to carry with me in my field works. Thanks.
@AIexanderHartdegen4 жыл бұрын
what next? Grandma vomit? HAhah
@marksmith51564 жыл бұрын
Big boss is talented to sometimes the taking apart is harder than the repair like watching your video's there very educational
@0101Virus4 жыл бұрын
The one X is by far the easiest to take apart, there's no clips, and the top and bottom are only two screws each, so, so much easier. Not to say he doesn't know his stuff tho, I'm just speaking of the console..
@romaine-ricardofrancis46904 жыл бұрын
What's the hand blower you used ?
@heretic55524 жыл бұрын
So what do you tell the customer? Also why didn't you clean the board or something
@NeutronX1013 жыл бұрын
Can you wash it in 91% isopropyl alcohol?
@lordseph3 жыл бұрын
Watching the wicking is always so satisfying.
@limebulls2 жыл бұрын
9:00 what do you use to clean the fan?
@ctecrwp4 жыл бұрын
Agree with Bullet Bullet....IPA best thing you already have....and charge for a full sanitizing bath....😁😁
@ASEWorldClassTech3 жыл бұрын
I have a Question is there some sort of canned spray you could hit the motherboard with like Mas Airflow Cleaner or Electronics Cleaner that would get that off the MB before you attempt a repair?
@arsenicjones91253 жыл бұрын
As you can see northridgefix has a busy schedule and hard time responding to all the comments so I hope you don’t mind me jumping in(late😅) In general you don’t want to clean a board before repair because “the dirt” may help you to narrow down where the problem is. At business scale, the accepted way to clean whole PCBs is with an ultrasonic cleaner which will dislodge dirt, etc and clean surfaces you cannot reach without any potential damage to the board. At home or cleaning small areas you use isopropyl alcohol and a cotton swab or you can use windex and a cotton swab followed by isopropyl and cotton swab for sticky substances.
@WilsonBradleyTheOfficial3 жыл бұрын
Were you using the flux drop on top of the chip and tweezers to absorb the excessive heat or just to hold it?
@arsenicjones91253 жыл бұрын
NorthridgeFix has a hard time getting to many comments to answer so I thought I’d try to be helpful. Not being him I’d assume he dropped it on top because it will spread evenly around the IC from there. He uses the tweezers to hold the chip in place while he gets the initial placement then presses down on the chip while bringing back the hot air to push it down firmly to the board. While the tweezers do absorb some heat you really don’t want a lot of that. The tweezers aren’t that large and will get hot enough to be uncomfortable in your hand pretty quickly.
@albarsenger31394 жыл бұрын
You're great, man. Nice work.
@tunaonwhitenocrusts3 жыл бұрын
Ah, the limited edition XBox One-pisS. Urine trouble if it turns off and on like that. It sure takes a tech Wizz like you to fix it. Your repairs are sure Number 1.
@snapgod14514 жыл бұрын
Great Job my friend like your work.. Brilliant.
@keithmatthews16734 жыл бұрын
I guess that in the repair business you have to take the 'woof' with the smooth!
@zanequillarts9050 Жыл бұрын
"You don't play with me anymore!" - some dog with an empty bladder.
@devanshudwivedi58752 жыл бұрын
Piss in general is highly conductive. It's likely it fried the APU and VRM's so there's no saving that XBOX. RIP
@dontakeshit Жыл бұрын
The turning off and turning on is a very common apu problem. So you're probably right.
@carlcalumpiano99224 жыл бұрын
What type of amp tester are you using sir ? the one that beeps
@WilsonBradleyTheOfficial3 жыл бұрын
What do you use to clean your flux? Tuner wash?
@arsenicjones91253 жыл бұрын
Isopropyl alcohol with a cotton swap or a fine brush. I forget how high a percentage it is but it’s at least 91%
@chagaarbellal49832 жыл бұрын
I hope some day make a video of your tools give us names brands tips and advises Thanks
@maxxbrowning61613 жыл бұрын
Hey northridgefix, I have a xbox one fat , when I turn it on after 2-3 sec it turns of again, I teared it down and the fan was wiggling while turning on I checked the fan cable then the fan worked but still it turns off, I took everything inc. heat sink and ran it the cpu went too hot in seconds, I can't even touch it, can you plz help out!?
@shirts20034 жыл бұрын
Whoever sent that 2nd XBOX with the animal urine, what is your problem. You had to have known, you could have at least told the shop about the smell.
@skothiyal23584 жыл бұрын
Stay safe..you should use a face mask with a respirator while opening a package...
@caboosevx96764 жыл бұрын
What does it cost for someone to send you something for repairs? I have an hp 2905m monitor that powers on and you can hear sound just no display on any of the display ports iv looked up videos and how to fix and found the parts that need to be changed I just am not good enough to desolder it get the right parts and resolver it
@lycanlycans75483 жыл бұрын
Why you don't clean up with Ultrasonic cleaner and alcohol 99.99% then you don't have that smell ! Or do it only with 99.99% alcohol and put the circuit board in a plastic bowl for one Hour and no smell anymore ! Thank you for your very beautiful and informative videos ! Best regards,
@ivanviduljevic4 жыл бұрын
I just Google for that Flux, i notice that it has expiration date. Does the date really play a role in how flux behave?
@oshacochan27023 жыл бұрын
i guess so since he called it the freshest flux on the market multiple times
@cutterbacon3 жыл бұрын
A dab under each nostril with vics vapo rub is meant to work well vs decaying bodies.
@GENERALCHAOS133 жыл бұрын
That PCB with Piss I have used None Coronated Brake cleaner and a Toothbrush
@sferg95823 жыл бұрын
If you encounter something with "piss" damage, is it possible to rinse the board with deionized water?
@8o863 жыл бұрын
Yes, or isopropyl alcohol. It's also completely fine to use regular hot water and soap -- just make sure it's completely dried before turning it on. 24 hours in a dry and warm place would be just fine.
@lilchu554 жыл бұрын
So what type of schooling do you have to go to learn this stuff? I’m interested.
@nicekeyboardalan69723 жыл бұрын
Gete an Iron and a heat gun and replace parts likee he does its not that hard
@balovesbalabat92794 жыл бұрын
Sir what kind of microscope you use color blue
@kennbmondo2 жыл бұрын
If it smells that bad, chances are it was a cat.
@alantorrance61532 жыл бұрын
10:55 "Animal piss". You work on it without spraying the whole board with a special cleaner???? Animal piss would leave more than just traces --- it leaves remnants that smell terrible and can corrode electronic parts, either from direct chemical action or by atmospheric humidity being drawn to the residue exacerbating its corrosive action. You will probably need two sprays: 1. one to remove the piss residue, and 2. to remove the residue of the first spray. Animal Piss is also a health hazard. I kid you not!!!
@SgtMilstar4 жыл бұрын
The acid in the piss started attacking the connections and the components. The sound failed followed by the mouse pad.
@CarlosLopes-pt1eq3 жыл бұрын
I wash the board with wather and detergent if the board is with corrosion of piss or other stuff and put on stove with 70ºC for some hours!
@audiogear4744 жыл бұрын
When I worked a TV shop years ago the TV guys would take TV's boards that had pee or roaches and clean with plain warm water with small amount of dish soap and let it dry a day or two before working on it.
@Vindix0074 жыл бұрын
Hard work (11:37)...😆 I don't know what it worst: dog piss or Coronavirus.
@gamerdudegamerdude4961 Жыл бұрын
Ultrasonic cleaner?
@tonymontana8973 жыл бұрын
How do you know if you're dealing with leaded solder ?
@AirzonesBlasters3 жыл бұрын
All "commercial" consumer products use lead-free to meet RoHS regulations. It's safe to assume that a fresh xbox will be lead-free. You can also tell by a slight matt sheen on lead free vs shiny for leaded. And leaded solder melts a lot easier than lead-free.
@tonymontana8973 жыл бұрын
@@AirzonesBlasters Nice, thank you !
@perfectpixelselectronics4 жыл бұрын
Oh also. My model is the xbox One S. I have one that has the power issue where is just turns on for a little bit with no video and then I have another one that will turn on and is stable, but no video. Was brought to me with a bad port. Somebody tried to fix it and ripped many of the solder pads off on it. I tried my best with the tolls in my previous comment but I am still learning and I dont think that this tip is going to work. It seems to big. Any suggestions or help would be greatly appreciated. Thank you so much. -Cody with Perfect Pixels.
@mustafaalalosy3 жыл бұрын
i remember one time a friend brought a phone to repair from liquid damage but when i start disassembling the device the smell tell me its was WC ( toilet ) damage and he never tell me that , i wash my hand and all my tools with alcohol and the smell stuck in my nose and shop for 2 days , lucky for me i never eat any snack in that time
@fixfymobile4 жыл бұрын
Cdoes the chip on the xbox needs to have the same code? Like yours is tdp85?
@ajitpalsingh73914 жыл бұрын
which liquid you use to cleane the board
@NorthridgeFix4 жыл бұрын
91% alcohol
@steveng55034 жыл бұрын
Well done my friend. Your determination to fix for customers is undisputed. A very BIG 👍 from me. 🇬🇧
@redpillllama32524 жыл бұрын
Wish you had of continued lol I've an xbox one s powers on then off no obvious problems, there's no short on the power supply plug and mosfets on power rail are all good
@B9NE3 жыл бұрын
Sometimes it's also the power ic management chip. Or the hard drive, hdmi port, or encoder ic or in even weirder cases the ethernet port or ram chips.
@B9NE3 жыл бұрын
Unlucky case the APU.
@nexxusty4 жыл бұрын
No, somebody doesn't HAVE to do it. Absolutely no way would I ever touch a board like that. Disgusting.
@edmarreyes2924 жыл бұрын
Thanks Buddy, now i know where to go on the board of xbox one for no display if the hdmi port is goo, thanks a lot, more repairs to com for u, GB
@staffordshirebullterrierli74113 жыл бұрын
Ffs, dog got so pissed off not going for walks it pissed on his Xbox 😂😂😂
@Faysal-fe3dk4 жыл бұрын
How much did u charged for that xbox fix?????
@NatureQuest20243 жыл бұрын
I think you made the right choice of not working on it, I wouldn’t, won’t be able to increase repair price to justify it. New/used unit would be cheaper.
@sypher01014 жыл бұрын
I know the feeling. We have cats, and one of them pees on our electric cooktop. Wouldn't know until you turn it on and the heat burns the catpee and it STINKS!. Eventually the heat burns the pee away and no more smell. For some reason they like electronics, cooktops, and plastic bags.
@kenfung21213 жыл бұрын
why not wash the pissed board before try to fix it, any stain left may cause some short circuit :)
@donald10564 жыл бұрын
I use a pad on a plastic stick to clean off the area where I work - no cotton fibers to take off
@em0_tion4 жыл бұрын
Can you provide make/model or a google image link? I'm interested how this looks and probably try it.
@bobajaj42243 жыл бұрын
'7atteto 3al 2' hahaha i knew it... keep up the great job.
@charleschandler91954 жыл бұрын
A cat will do this. I am surprised no cockroaches laying dead in there.
@itsmee97794 жыл бұрын
l just screwed a few surface mounted capacitors on my xbox 360😢 will check ur website if you.have them. 4.7 uf 6.3v x5r805
@grproteus4 жыл бұрын
you could say they did a piss-poor job of fixing it, but I don't blame them :P
@antoniskonstantakis54742 жыл бұрын
Hey we finally seen bigboss hahaha. greetings from Athens Greece
@markharrisllb3 жыл бұрын
I can't imagine sending something a dog urinated on for repair, you have house contents insurance for that. Mind you there are people who will spend hundreds on a Xbox and nothing on contents insurance, then ask for charity when they lose everything. As so many family members work there and you evidently have a lot of respect for 'Big Boss' is he also a relative?
@rashira96103 жыл бұрын
No offense to the owner of the second Xbox, but if you leave your system in a place that is easy for a dog to piss on it, you kind of deserve it. I will never understand why you would leave expensive items in a place where an animal can easily damage it.
@مصطفىمعنعبدالاميرالخفاجي3 жыл бұрын
ياخي والله انك اسطورة سمعتك تقول حطيتو عالتنين😂 كنت حاس بانك عربي بس مو متاكد
@robertpage20233 жыл бұрын
I'm sure that Mr. Alex has a "hazard" charge or such cases as the dog pee board. Perhaps a dip into a vat of Mr. Clean? or Alcohol? THEN, go to work on it. When you send that board back, pack it in Potpourri.
@Happyoldfashionfamily4 жыл бұрын
Snoopy at 1:34. Ha. Second time I have seen it in your videos.
@GetGood54 жыл бұрын
Customers often lie about liquid damage. Not like you're not going to find out as soon as you you Open the thing... It's a sad world
@bigbudtld45953 жыл бұрын
You are doing the lords work. freely giving such priceless knowledge, as well as providing easy access to the tools and components needed to achieve these things. I simply would not have the confidence to do many of the things I have done recently if I had never found this channel. This is easily the best out of all of them- making complex things easy to understand, very relaxing, and entertaining on top of that. Huge thanks!
@ronnierobinson15022 жыл бұрын
No such thing as the lord....
@mr.number9279 Жыл бұрын
About the second one... that customer is a terrible liar. He said possible liquid damage. First, the customer is saying he isn't even sure there's liquid on it. Lie #1. He then says "liquid damage". Sounds like he isn't aware of what it is. Lie #2. Lie #3: you can't say "possible liquid damage" without having some good idea of what happened, and said idea was not told. "The dog had an accident near my console, I believe it may have gotten wet" is what hit his mind to malform into "possible liquid damage" but the lie is in not telling Northridge. Frankly I wouldn't trust it either. Disgust aside the issue is safety and if you can plainly smell something there that shouldn't be AND YOU WEREN'T TOLD ABOUT IT don't touch it. Especially since urine is not sterile.