Mercedes Benz CLK 320 Key Fob Repair with too many issues

[@dennissmithjr.5370]

Thanks, I am glad you love the shirt I sent. You guys are great and you have been an inspiration to me to learn and aspire to be as good as you at fixing equipment and most of all honest. Take care guys.

[@HikerBiker0]

the short is gone and the job is done

[@kalaikarim4544]

been a weird 3 days without waking up to your videos , glad you're back

[@smachta]

That's a professionally done repair that reflects huge number of previous similiar repairs. Love your job👍

[@jetamiemaster]

I woke up and watched your video. Now my day is complete.

[@repairelectronics8198]

the short is gone... the difficulty is gone ...the knowledge is coming- thank you good man

[@harryohanson]

I am a kind of guy who can fix anything, EXCEPT electronics. That has always been a challenge to me. You are my inspiration! Thank you for all the videos! It’s a tremendous help to to see how the mind of the electronics tech works.

[@trym2121]

Electronics is wizardy stuffs. 101010

[@ergimazari3641]

When alex got the box i thought we would se like half without coils! Keep up the great work

[@Masso1973]

I like how you don’t back down from a job like this, nice

[@stefanlechner]

Thank you for that video. Love those keyfob repairs. They are build simple. 😂that view on 14:11 could be a new meme😂 nice new shirt.

[@richardbell7233]

Yea so funny lol

[@jssabdo3718]

All your videos are amazing and the way you work is amazing. I follow all your videos and learn every day.🇩🇿🇩🇿

[@ahmedsiddiqui4658]

Short is bond to go. Because guess who's fixing the circuit. Indeed you are good inspiration to others. Keep up the good work. All the best ahead sir

[@davidchandler1127]

You Sir are a master I enjoy watching all your repairs,

[@nabilseoudi2910]

That video is a spirit lifter, enjoy the t-shirt brother, you earned it. مبروكة

[@alfredoduran3946]

Been a while! Great to see a video today.

[@aliassaila8037]

Perfectly repaired. Congrats for the Nice T-shirt.

[@alhobre]

Nice to hear "the job is done" and what a bwautif tshirt...the short is gone! Nice video once again.

[@ja.935g67]

My low melt just came in thank you Alex!

[@kdcorp5772]

Teath brush works great in this type of situations... Was waiting for your video..

[@evoxslaydiy7620]

Well done Alex! One request. I would like from you to mention the temperature and the air speed from hot air station you use to different boards and to different components you repair. I know that you do that many times but it will be very useful for us repeat this as many times you can. You are our teacher and to repeat important things will be very useful for us learn from your experience. Sorry for my English is not my native language. Greetings from Greece!

[@MBrulla]

I wouldn't copy his - rather look at what your hot air station works best at. It takes time/practice to know what's appropriate for each application.

[@evoxslaydiy7620]

@@MBrulla yes you are right but it would be useful at least to know approximately the right temperature for a specific board (like ps5,or a specific PC motherboard). This is for me very useful because I don't want to make damage from overheating. There are a lot of parameters when you are performing microsoldering or just soldering a component but an information like that is crucial. The experience is the most important but any tip for us the amateurs is welcome.

[@MBrulla]

@@evoxslaydiy7620 Your eyes are your most valuable tool. If you're working on something with hot air and you see something shift or melt...stop. If you're working on something that takes a lot of heat and time...use flux and low melt solder. Always replace the leaded stuff. I actually worry when someone asks what temp to use because I've seen people use the same settings as me, but they have a different hot air station and they end up burning things because they didn't know any better.

[@Darren777Au]

Another nice video, thank you once again. Just shows you how dirt can easily get into a device.

[@aliasgerzakir]

Missed the videos for 3 days 😁

[@bagithbabut]

Nice T-shirt.... The Short is Gone..😍 👍👍👍 Loves from Dubai.

[@pablonunez194]

Excellent job .Hi from Uruguay

[@fichambawelby2632]

Nice T-shirt, Alex! 👏🏻👏🏻👏🏻

[@artursmihelsons415]

At least, these issues wasn't very big.. I've seen worst.. One time even chip was super glued by customer back in place, of course it won't work.. 😂 New shirt looks great!

[@bennyyeung2172]

14:53 I can feel your happiness through the screen

[@josearrasola7236]

Hello sir , I was late watching this video due I’m getting ready to go in for chemo ! Which will mark 15 years of chemo so I like to prepare myself the day before and is where I stay in bed all day so when they start therpy I can sleep and get some go rest ! I’ll line to post a video but due to HEPA law they won’t let me record but one day they said I’ll have a room for myself they’re working on building it’s almost done ! And one day I’ll like to share my experience with chemo their is no fear

[@josearrasola7236]

@@joesalgadSF415 thank you 🙏 it has been a long fight , the University says that I’m one out 12 in Florida with and has had the therpy for so long ! , and now with this pandemic it’s even harder due to where I go and get my therpy their thousands of COVID ! And makes it even harder for me to get close to their ? But thank you 🙏 so much

[@shastrichandoo817]

Thank you. Great video. I have two keyfobs to fix at the moment....good job

[@eazyzoey2561]

So satisfying to watch!

[@Jencha010101]

The shirt company should have slogan: The shirt is gone

[@prairiedawg792]

At 6:10 you flexed the coil slightly when soldering the 2nd joint. You should really re-flow the 1st as there's now mechanical stress in both the part and joints.

[@oneandonlytyler1]

weve missed you our boy al

[@WhitbyWireless]

Hi Northridefix thanks for your informative videos our group is your big fan. We are beginner in repairing. We all begging you one video from you how to test all the motherboard components in detail thanks Allah bless you

[@erickflushhhh]

glad you're back

[@same4718]

I love the key fob repair videos great work

[@Marcel_conde1]

I love it! THE SHORT IS GONE

[@Traxano]

Thank you for youre work and Sharing the Knowledge

[@mustaphahammad1196]

Love how you keep it nice and clean thanks for the inspiration sir

[@temomoreno2018]

Great video. What would you chsrge to fix my daughter’s 2000 CLK320 key fob. The trunk button won’t open the trunk.

[@GIT-COMMS]

Thanks for you awesomely awesome style at repairs

[@panagiotiszafeiriadis8425]

Nice job 👍 thanks for the lesson 😊

[@milandjukic88]

Alex, why you not used donor board as main board? It's in better condition than clients board. Just transfer chip. As always, nice job and nice watching you 😊

[@pablonunez194]

Donor boards are just that. I think donor boards are from costumers that dont want to pay. So if you do that you gonna be out off business In a month.

[@vf3378]

I rememeber video where Alex mentioned that he bought box of these key fobs as donors, not that these boards are from non paying customers.

[@milandjukic88]

Me too

[@beautiful1morenita]

What is the little gray square under coil

[@switchroot6616]

Love the shirt it looks good on you I love it so much I love your videos and I love what you do I hope one day I can be like you I don't practice that much because I work a lot I'm a cook from Panda Express technically I work 12 hours a day it's a hard job but what can I do I love electronics I would like to fix them like you that will be a passion for me thanks for your videos and take your time to do them I know it's hard having a family and a business we appreciate all you do for us teaching us without any cost thank you so much I will like to know if you offer classes because I saw something in your website about classes but I don't know how it works thank you so much and you have a great day sir God bless you

[@albibhanimzmz77]

السلام عليكم.. لماذا لا تستعمل الكاوية الحرارية من الاسفل عند رفع القطع التي تحتوي على جزء بلاستيكي ظاهري؟

[@azashukri5322]

This was fun to watch. Loved the video.

[@elomeli211]

So the coil is not fob specific? It can be swapped from another similar mercedes fob? I took a donor and my fob into a shop and they said the frequency of that coil is what identifies to my specific car. But so far everything I've read, says the coil is to draw power from the car and to the fob

[@MBrulla]

How would the ultrasonic damage the IR component? Is it the frequency that the USC operates at, or is there something else I'm unaware of? Dirty job, but those brushes work great.

[@houssemhoss3108]

Small board, not easy. Good Job

[@mistral2099]

Love your work!

[@cesarcuervo6037]

Good videoas. Please tell me where i can find sapre parts for the key. Specially the coil. thanks a lot

[@Fuzzy-88]

Man this is so relaxing ☺️

[@MathiasVen]

That shirt is nice 😅😅 you should add that to your Merchandise. And good work at the key

[@SRXMusic290]

i like that message of the t-shirt

[@alliseeify]

“Consider it fixed” belongs on a shirt.

[@martonbesze6252]

Great video again! May i ask if you could set up a camera for the multimeter, voltage injection tool and add it somewhere on the screen? You always have to place it somewhere to show us or to avoid the reflection. It would be great!

[@raincloud54]

I prefer the catch phrase “The job is done”

[@vinitsingh8962]

Great video man.👍👍

[@arasus6107]

Superb job bro keep rocking new tshirt also super 👍👍👍👍

[@anona4682]

Ultrawonic cleaner can damage the infrared transmitors? How?

[@Vitani168980]

Well I am glad you remembered to cut out the part where you changed your shirt.

[@SteveWeinrich]

I'm glad he cut it out too, but I'm sure there are a few lady subscribers that wouldn't have minded a little Alex skin. L O L

[@sharfazhameed6382]

Always Great work.

[@stevedebeukelaer1424]

Nice work but where can you buy such tester.

[@martinlumra9241]

Great work 👍

[@titomar6634]

the short is gone t-shirt. it really good

[@george8920]

your videos are amazing - very interesting !! thank you !

[@raulcarvalho8023]

Love the t-shirt (VERY NICE) Do your best ever time. Regards

[@SURGE101]

Sounds like the coils fall off or go bad quite often on Mercedes Benz keys judging from your box donor boards. Great video as always👍

[@mrhilma]

I am really liking these presentations, so thank you for them. For interest - for this fine scale work, what nozzle diameter and hot air temperature do you use for unleaded solder?

[@coromotronicstaller5594]

Good job mate, got the control working, but I don't think he didn't do a complete maintenance job, it doesn't look clean, just a constructive observation.

[@tschupbach]

Wondered why you always had a hard drive behind the fob tester!

[@ThePortecos]

you should make a mercedes benz fob playlist .

[@halilbaltali2905]

Selamin aleykum kardeşim hangi temizleyici kullaniyorsunuz.

[@ErickBuildsStuff]

Didn't expect it will be such a long video. Title of the video could be "Everything wrong with the Benz keyfob"

[@garyr7027]

Like the shirt, "the short is gone" lol... nice slogan. Some shirts feel a bit rough when new, a few washes should cure that. It's probably cotton with polyester mix fabric... they're also warmer than 💯 percent cotton.

[@garyr7027]

@Shafqat Altaf yes they do indeed.

[@donnierobertson3088]

Great job and video like always

[@ACOnetwork]

Finally FOB repair 😁

[@keithy077]

You can use the camera on your phone to testan IR signal.

[@PanterasPanteralandiaSinnerFTW]

Can't you use contact cleaner for dirty boards? or does it contain something that is not good for this type of situation? Thanks for the video

[@bigdaddyjr201]

always watching. god bless...

[@kpakpatojournal1555]

i was so relieved when you stop using cotton

[@DiJAndy]

Nice shirt Alex!

[@chifundokolombo129]

Nice job Sir!!!

[@macoxygene]

Nice job!

[@pratikshitsaini5444]

Sir which smd do you use ?

[@neutrinowave]

Alex can we inject current with switch power supply

[@Mrtsiourtos]

Nice T-Shirt 👍

[@cQc-e2v]

Good job 👏

[@RahulKapoorokb]

Nice many Thanks from india

[@jasonlax4112]

I was going to say ultrasonic cleaner... but I never thought about damaging the IR emitter

[@SteveWeinrich]

I had the same idea: ultrasonic cleaner! But when he mentioned damaging the IR emitter, I said to my son: "That's why he's the expert and I'm the KZbin subscriber." :-)

[@DrTune]

wow why is that PCB not conformally coated when manufactured? It's covered in gunk but.. you'd kinda expect that to happen on a keyfob.

[@mohammadyoussef3958]

Thanks 4 sharing !!!

[@rfr653]

good job mate.

[@el-gibbortv3507]

i need help my coil is broken from South Africa

[@AlexandreKaufmannKrüger]

Very good friend!

[@utchihamadara2225]

Good work 👏👏👏👏👏👏

[@thomasfretz9684]

You look good in light blue.

[@102bahri]

i will never think of the infrared when using utrasonic thanx

[@uc9584]

shit the sreen flick at the beginning make me think my video card are about to die 😂

[@mahmoudelwakkad7855]

Welcome back 🥳🥳