Sharpening Woodworking Tools Using Norton Oil Stones

Watch how to sharpen woodworking tools using Norton Oil Stones.

[@haroldschultz5864]

The man said the chasing of the burr can be exciting . This guy would be a blast at a party .

[@billwhite5853]

This is one of the most thorough videos on KZbin . I really learned a whole lot just by him showing how to properly hold the tool to get the correct angle. I would love to learn from this gentleman as he is truly an artist

[@johnpayne6196]

Great. This process can be used on all chisels, plane blades etc. Also, all abrasive faces can be utilised. Try it. This man is great: teaching (the learning), patience, demonstration techniques, voice usage, and end results. Thanks for posting it...

[@alierem4266]

By far, best ever video on hand sharpening of chisels. This is regardless of brand/origin of stones: . hand technique of old timers stand well the time and surpass new tech gadgets' results, . this re-enforces absolute base rule of patience, reasons for various steps in keeping safe and . maintaining in best state of such valuable tools and stones. thank you.

[@markdudley3831]

Maurice, your explanation into wood working tool sharpening is superbe . I have been a carpenter and recreational hunter for 41 years . Blade sharpening is a major factor in being successful in my chosen disciplines . Maybe our technique differs slightly but it is really satisfying to see you only require 2 stones & a clean strop to gain a "beautiful"working edge . Cheers from New Zealand

[@deemdoubleu]

Proper old gent with appropriate years of wisdom. My Dad was a joiner and used his left hand as a strop using a slapping motion. When you're working outside, you don't always have the luxury of a bench and a strop but the oilstone was always on hand.

[@midninteranger4315]

I've learned so much from this video this gentleman teaches the correct way thank you sir

[@shannonelliott6116]

I recently worked many chisel bagels to bring them back into shape after decades of misuse. Using the veritas jig, I spent hours on a new coarse stone, after initially setting a 25° angle with a bench grinder, to get the bevel edges close to perfect. Granted, I got them sharp, but very easy to resharpen at not exactly the same angle I just gave them. Tried this freehand method last night, sharpening sideways as opposed to straight into the bevel. This guy is spot on! Took no time at all to get a near perfect edge. First time I've seen anyone use this method and it will be a mainstay for me! Kudos to Norton for providing what I believe, is a lost art to honing!

[@shannonelliott6116]

Bevels, not bagels...lol

[@zoundsic]

Had my Norton India Combination Stone 1B8 since 81, still looks flawless if a bit stained.

[@NortonAbrasives]

Thank you for sharing, that is great!

[@makenchips]

One of the best if not the best free hand sharpening videos to date! All the points made are excellent! How do you suggest in floating the stones when they do dish, be interest to hear your method!

[@Sm0lly]

i started shizzle sharpening yesterday this has given me information i can use and how did i ever get the shizzles sharp to begin with without this vid

[@kimbureh7338]

fascinating to watch an expert at work. thank you for this video!

[@dustinewing7974]

I suppose this method could be used to sharpen a scandi-grind knife? I'll definitely try it out. Thanks for the video.

[@gregelkins8178]

Excellent video!

[@rossmorrow3013]

Dear Sirs, Could you please advise me regarding the honing process where you talk about holding down the blade. Is this the ‘out of box/packet’ bevel or are you referring to using the ‘out of box/packet’ as the primary bevel and then lifting the blade ever so slightly to get a new edge. I do apologise if this sounds picky, it’s just sometimes things get lost in translation! Wonderful video! Yours truly ross

[@welshman100]

Was interesting to see how Norton recommend sharpening using their stones. I've worked for a number of master woodworkers over the years, and everyone has their own way of doing it. Though, my Norton India stone has cupped over time. I'd be interested to learn how Norton would recommend flattening it.

[@TheRwyoung]

My "fine" india developed a slight dish as they all do. Working primarily by hand, it has little to no effect. If it does bother you, go out on the front sidewalk with a bucket of water and make larger figure 8's using water to wash things. it will become flat enough.

[@giddy6196]

very nicely explained thank you!

[@boozoochavis7506]

Good info all the way around, the editing left me feeling like I got a sharpening lesson from my former latin teacher though! I guess a little more step by step all the way through would have helped me see exactly what he was doing all the way along? Thanks for posting this.

[@radoslawjocz2976]

Some time ago I bought Norton India Fine FB8 I used it a lot for kitchen knife sharpening and also for Stanley 151 spokeshave. It is a great stone, stay flat and cutting good even tough street such as VG10. I can flatten and sharpen spokeshave free hand similar way as on this video, thanks for sharing this. However I learned this probably from Paul Sellers he have great videos about woodworking.

[@LyonhartZ2]

AMAZING OLD SCHOOL TEACHER. (Norton paid a Surgical Tool Sharpening Specialist to sharpen a chisel)

[@charliereina7933]

Hi, Joel. What oil (brand, description, etc.) did you and Mr. Fraser use in this video? What kinds of oil - WD-40, 3-in-1, mineral oil, etc. - may be used? Which should not be used? Can you use water instead of oil? Thanks.

[@thewalnutwoodworker6136]

I would love to be able to purchase a hard Arkansas or even a Washita from y'all.

[@TylrVncnt]

Never learned more in 30 mins

[@nityanandaray5298]

I have just purchased a Norton carbide/silicon combination stone would you kindly advise whether oil or water will be used whilesharpening kitchen knivesetc

[@jrclad2964]

When will be WASHITA stones available once again ?

[@greg6107]

Superb !

[@612morrison]

This is how my grandfather taught me to sharpen chisels and irons when I was a probably 10 or 11 that was 40 year ago.

[@MintStiles]

Great way to sharp for the ultimate best edge. But for daily woodworking, it's probably better to be a bit more aggressive with diamond then water stone or strop. It's technically beautiful, but I'd go crazy doing this for 3% extra sharpness.

[@markcahoon2534]

My question to NORTON is, why close the Washita mine, but keep the Arkansas mine going. Washita's are way more useful than Arkansas stones, as most old woodworkers will tell you. It probably has something to do with cutting the throat of some of your other stones, as the Washita is very versatile.

[@NortonAbrasives]

Thanks so much for your comment. We are glad to hear you are a fan of our Washita Arkansas Stones. This product has had limited availability for many years based on a number of factors. Norton/Saint Gobain still retain exclusive rights to the Washita quarry location and may decide to re-activate it at some time in the future. We’ll keep you posted!

[@RafaelHe]

@@NortonAbrasives given the renewed interest in hand tools, I'm sure that a lot of people would buy newly mined Washitas.

[@dmcnamara9787]

Happy to find this….took several classes at the Y in Manhattan with Maurice….great teacher. Remember first time he instructed me to saw off one third of the pencil line ! Details matter

[@emandejnozka1369]

Thanks.

[@thewalnutwoodworker6136]

I have yet to find a vintage chisel that was not rounded

[@bobcharlie7982]

Anybody recmend some good value oil stones?

[@colindiggle9377]

reminds me of my school woodwork teacher only a lot nicer our teacher would throw a bit of wood at us if we wasnt paying attension it worked

[@billystray7007]

am i wrong in using multi purpose 3-in-1 oil ?

[@jeradcudiamat7127]

That should be fine, you can also use mineral oil or glycerin. Even water with a bit of dawn dish soap in it works. I saw a guy use transmission fluid once too. Try stuff out and see what you like best.

[@cloroxbleach3108]

Thank you for asking that question! I still use multipurpose sewing machine oil .. does the sharpening..but wanted to know if it was okay!

[@WillEyedOney]

I use baby oil, which has the added advantage of smelling nice. :)

[@4dirt2racer0]

how can a stone possibly "not" dish??? everything wears n if its used like most ppl use stones, and how stones are inevitably used, isnt it going to eventually dish??

[@fricstix7072]

My norton india aluminum oxide oil stone has dished after 12 chisel sharpenings. I have heard that the natural stones last longer before dishing. This is a the company that sells you stones, so of course they will say that they never dish.

[@4dirt2racer0]

@@fricstix7072 dam just 12?? i almost wonder if something was wrong with that stone idk if they last longer iv actually never had a synthetic stone, i got a box of natural stones when i was really young at a yard sale for next to nothing so other than for a few minutes here n there iv never really messed with synthetics, everybody says the natural stones r better im kind of wanting to try the other because the natural ones arent always consistent

[@thewalnutwoodworker6136]

They no longer quarry Arkansas stones and now make stuff in Mexico...

[@joshhodkinson4694]

Get a tormek

[@alierem4266]

Yes, further if one did not care to learn --and/or was time and energy poor as well as had abundance of dollars-- they could pay someone else to sharpen their tools.