Not Again! We Broke the Turbo Cruze 1.8t Budget Build Project and Got Stranded on the Freeway!!!

Not Again! We Broke the Turbo Cruze 1.8t Budget Build Project and Got Stranded on the Freeway!!!!
10% off code: MATTCHEVY
GGT3582 turbo link：bit.ly/3Cd8rzB
We're giving away a Maxpeedingrods GT3582 turbo to our viewers and subscribers! Giveaway starts March 4 12:00 AM CST and Ends April 4th 12:00 AM CST. Comment "GT35" to enter to win. No purchase necessary. Must be in the continuous 48 US states, and not open to family or friends.
Installing the $113 eBay Turbo on the Chevy Cruze 1.8 Daily Driver Part 1 - • Installing the $113 eB...
The eBay Turbo is Building BOOST!!! Chevy Cruze 1.8 Daily Driver Build - • The eBay Turbo is Buil...
PCV Issues we had - • Something Went WRONG w...
Making an equal length turbo manifold - • How to Make a DIY Turb...
Making a log style turbo manifold - • The DIY Turbo Manifold...
Custom Forged JE Pistons - • Custom Forged JE Pisto...
How to Install an Upgraded Fuel Pump - • How to Install a Repla...
Custom Camshafts for the 1.8 Cruze - • My Reground Camshafts ...
Upgraded Stage 5 Clutch and Aluminum Single Mass Flywheel - • Single Mass Aluminum F...
Be sure to follow me on Instagram to get the inside scoop...
►Instagram - @matthewchevalier
🔔 Subscribe and hit the bell to support me and so you don't miss a thing!

[@jimhiscott2918]

I had a bad feeling about the flywheel bolt repair job but, moving on. If Competition Clutch has there 8.58 pound steel flywheel for your application please purchase it. Very solid piece. Keep up the grind. I am very much enjoying every episode my good man. 👍

[@cmattdabrat]

Thanks Jim! I think this billet steel piece I have on the way should be the ticket.

[@builtbybagsy]

Crank to flywheel dowels are your friend!!!! If you can install oversize bolts, you can install dowels. Drill and ream to suit. Very common in high HP NA 4 cylinders that suffer from lots of vibration. That said, wrong torque settings won't be helpful. Cant remember from the video, were they lock tighted as well?

[@cmattdabrat]

This is true. I'll see what I can do to add some. The stock bolts were loctited as well. They come with some from the factory. You're right about that. I'll have to install the balanced crankshaft in this round.

[@ExpoPerformence]

Noooo! 😩 it’s alright man, it’ll all get resolved. The boost controller will definitely help tie the build together. Great video Matt as always (GT35)

[@cmattdabrat]

Tell me about it! After all that work, but I think we'll put this issue to bed next round! Thanks!

[@jamesvang4392]

Gt35 baby!!!! Loving how devoted you are. I need your energy! God bless!

[@cmattdabrat]

Thanks James!

[@mwpriem]

Hi Matt! Sorry to hear about the flywheel issues. I've got the x18xe1 running a stock steel singlemass flywheel with stock m9x1.0 bolts (which i've re-used 3 times now), pushing 320hp no problem. I also think the aluminium flywheel is the culprit, rather stick with oem stuff unless its critical to upgrade to aftermarket. Oem stuff will always give better reliability than aftermarket.

[@cmattdabrat]

Thanks for sharing! Definitely a lot of truth to that.

[@nedspacer]

I love your perseverance. Keep up the hard work, I really like watching this project progress... also GT35.

[@cmattdabrat]

Thanks! Will do!

[@modeverything1]

Well that sucks! I was worried it was internal engine damage "broken" when I saw the title! I think the steel one should work better all around.

[@cmattdabrat]

When we were driving and she just died, I was thinking the same thing, but when the starter wouldn't turn the engine over, knew it was the same issue, but we'll get her sorted! I think the steel flywheel will work better too. Should be the ticket!

[@spankthemonkey3437]

Factory cast iron flywheel is good for boost it will help keep engine spun up while shifting gears. Lightweight flywheels are better for all motor in my opinion.

[@cmattdabrat]

The sprung dual mass flywheel is pretty weak. We'll give this single mass steel unit a try.

[@johnsnow1355]

Yes dual mass is no good for high rpm as well I couldn't believe u were spinning it up to 8000rpm on stock crank and cams.

[@jordanwatts7192]

(Gt35) turbo hasn't given you any problems. 👌🏾👌🏾

[@MindsMouth]

I've got a 1.6L Chevy Aveo5 hatchback, I've been following your Cruz build and want to turbo my little bean. I might do a remote turbo setup for simplicity. Keep up the good work! 😄👍

[@cmattdabrat]

Thanks! A remote setup sure would make things a lot easier.

[@1SGBob1]

Well, good thing there are no immediate Cruze meets coming up. Hopefully soon, you'll be back up and running! GT35

[@cmattdabrat]

Definitely will! Looking forward to getting out and doing meets, racing, going to "Mexico" for some street racing.

[@samuelchartier3684]

Your channel is awesome! I like all your DIY stuff! Peace out with your piece out! 👌

[@cmattdabrat]

Thanks Samuel! Piece out with your peace out!

[@802Garage]

I knew the bolts that broke must have been over tightened! Not that I'm crapping on you, it just wasn't making any sense to me. Sometimes I literally find 5+ sources for a single critical torque spec. It's amazing how often I find conflicting results and have to keep digging to get proper verification. I don't personally think the aluminum flywheels are worth it for the money when a lightweight chromoly steel version is available for less money with similar benefits and none of the downsides. Glad you're remaining positive. Hope you get it sorted quickly!

[@cmattdabrat]

I know your advice always comes from a supportive side. You're right about that, on both fronts. At least we'll get it sorted out, and the replacement forged pistons are on their way. At least that's a W!

[@802Garage]

@@cmattdabrat We all make mistakes. You're gonna be the king of this platform when you're done. ;)

[@CeezarPie]

Gt35 Man it will come together soon ! A boost controlar will make life much easier

[@cmattdabrat]

That's true! We'll get her sorted and a boost controller on soon.

[@sinnersconquest9311]

keep making progress don’t give up even if it’s blown bro

[@cmattdabrat]

Never give up! More to come soon.

[@Jdoustou15]

I think I mentioned the over tightening of the bolts in the original failure video, the bolts on the 1.6 are the same diameter as subarus, and subarus do not have issues with stock bolts

[@cmattdabrat]

This is true. You live and learn, but we'll get it sorted!

[@matthewlowton2151]

Damn that sucks, I really hope the next fix works! Can't wait to see her running and making boost. GT35

[@cmattdabrat]

Thanks! It does but we'll get it sorted.

[@lillpee]

GT35 I think the steel flywheel will be more practical overall. I didn't like the aluminum one I had. It made the car harder to drive in traffic

[@cmattdabrat]

I think so too. The aluminum unit felt okay on the street, wasn't too bad.

[@TrueElderblade]

GT35 poor flywheel issues... that must really suck pulling the transmission off/on so often. but great dedication, and keeping them hopes up. good luck!

[@cmattdabrat]

It definitely blows, but nothing we can't sort / figure out.

[@salt9771]

Good build.

[@cmattdabrat]

Thanks!

[@djcybercorgi]

DAMN! Dude you are amazing, keep going!

[@cmattdabrat]

Thanks! Definitely will!

[@melvingrimes7886]

ARP bolts and pin the flywheel.

[@sinformant]

Gt35 I love what you are doing to the platform! Can't wait till you get the bugs worked out. Could Maybe apply it to my gf's 1.8 sonic but not sure how her stock auto granny would hold up.

[@JoshVC]

My 1.8 auto held until 10psi then the diff broke. Upgraded to a 6t45 and it’s been fine since

[@cmattdabrat]

Me too! Josh has more experience with the auto trans. Sounds like the 6t45 has been working well for him. Hopefully by document all of this it'll save you some headaches.

[@sinnersconquest9311]

I love your videos bro i get crazy excited about them i believe the cruze is the new honda of the car game

[@cmattdabrat]

That's awesome! There's more than one platform out there. I'm putting the time in to show my wins, and L's.

[@PETERDUDZIAKK]

Great video!

[@cmattdabrat]

Thanks!

[@ofxvy8429]

Just got my project 1g Eagle Talon yesterday alternator was bad and battery went out 80 miles from home on the side of 95 wasn’t a fun time.

[@cmattdabrat]

Being stuck on the side of the freeway blows. It's unnerving with not knowing whether or not some idiot will side swipe you.

[@miksu7784]

No way... Your luck must turn around soon so you can just rip it and get it tuned well But no can do, this is what building a project car is

[@cmattdabrat]

Tell me about it! I'm sure we'll get it sorted and be able to enjoy the car soon!

[@jessetimm4809]

Gt35 keep it up it will work out in the end.

[@cmattdabrat]

Thanks! I think so too.

[@boostedbrothers5606]

I have a 2013 Buick Verano with the 2.4l eco tech lol, would it be almost the same as your build?

[@cmattdabrat]

Should make for an awesome candidate for boost! I'm not that familiar with the 2.4, but looking at it, seems like it's a good design.

[@jok3yjesu339]

I honestly think it’s something to do with internal engine balancing or the aluminum flywheel is chattering a lot causing the bolts to break

[@cmattdabrat]

We'll definitely have to take a closer look at it!

[@djshorty26]

I have a 1.4 turbo be nice with that g35 turno

[@sinnersconquest9311]

set painters tape on the car and list and categorize them from what needs to be done prioritized order

[@cmattdabrat]

Love the idea, and it's crossed my mind.

[@sammykitchen1470]

I hope you can figure out all of the little issues with it!! Good luck Matt! (GT35)

[@cmattdabrat]

Thanks Sammy! We'll get her sorted!

[@kysonreber2658]

GT35! I would love one for my single cam Honda!

[@cmattdabrat]

Oh nice! Definitely a proven format.

[@generiley355]

GT35......for the win !!!

[@viniciusmorais8931]

Excited for this build! GT35

[@cmattdabrat]

Thanks!

[@yurikohako]

Gt35 Keep it coming Matt!

[@cmattdabrat]

Thanks! Will do!

[@ThankMeNowBro]

All I have to do is comment Gt-35 you say? lol nah, but that cruze is going to be a beast once all its quirks are settled, can't wait!

[@cmattdabrat]

Thanks!!! That's right, on the video in the card / link.

[@scottybasham1020]

On the next episode LSJ swapping my Chevy Cruze 😭 sorry about the bum luck buddy. Hopefully you get it lined out soon.

[@cmattdabrat]

LOL, an LSJ would be a sweet swap! Hell, if I were to go through the trouble of doing a swap, it'd be RWD LS with a single turbo.

[@HRTSBRT]

Dang! But hey, you can't make'n omlette without breaking eggs. What Motor and transmission code is in the Cruze? I might be able to help you out with some Data, Parts people have experience with and so on. (Those engines are pretty common over here)

[@cmattdabrat]

Isn't that the truth! It's the 1.8. Engine codes are 2H0, Z18XER, F18D4, A18XER, and trans is a M32. Anything you can point me to would be a great help to make sure I'm getting the correct info. Not sure why this manual I have had the torque specs of the bolts marked incorrect.

[@jesusislord2149]

What numbers are you aiming for after it’s all said and done? Would you ever consider swapping the engine later on?

[@cmattdabrat]

Shooting for numbers around 450-500whp. If I did do any engine swap, it would be converting it to RWD with a turbo LS 5.3.

[@spankthemonkey3437]

@@cmattdabrat a 4.8 with a 200 shot of naws will get you in the 10s most likely. They did a blazer with 4.8 and a 300 shot on a stock unopened 4.8 and ran 10s this car is much lighter.

[@jesusislord2149]

@@cmattdabrat awesome brother! Looks like you’ll get there soon enough I’ll follow along on the ride. Keep uploading you’re going to blow up pretty soon.

[@w.r.1356]

Sucks bro, hopefully next go will work out, got faith in you man. GT35

[@cmattdabrat]

Thanks! It does suck, but nothing we can solve. We'll get there.

[@arashtorabi8852]

Hi Matthew I'm sorry for braked flywheel I can't believe with that bolts u put on the flywheel it's braken again. I don't have this experience but call someone and have some advice torque for flywheel bullets I'm sure there is different between aluminum and steel flywheel

[@cmattdabrat]

Not a bad idea idea. Thanks!

[@danssv8]

(Gt35) on a tow truck is not what you want Matt, gotta have some boost Matt.

[@cmattdabrat]

I'm looking forward to it just holding onto that boost, rather than taking rides on tow trucks.

[@copdwarriormcdonald7968]

Brother, I am so sorry for you! I got my 2020 Camry XSE rear-ended Saturday at a stoplight! I am a spine patient with C2-C7 fused together and now this crap! The wife's back is now jacked up too. The crazy thing is I watch the dude stop behind me and then as soon as I stopped looking in the Rearview mirror. He accelerated right into the back of us! Once I got the car stopped and the seatbelt lose, I got out and the pain made me get back in the car with my wife's assistance.. Sigh, We will build again and better Brother! Keep your head up! He was in a lift Chevy blaze with hardly no damage! Sigh

[@cmattdabrat]

Sorry to hear that! A buddy of mine had a similar thing happen and had to have surgery to correct it and relieve his back pain. I hope things getting sorted out and you guys are feeling better soon. Cars can always be rebuilt, but your health and comfort is of the utmost importance! I keep you guys in my prayers.

[@deko9151]

Good your ok

[@cmattdabrat]

Thanks!

[@jeffboyer8214]

Dang that's horrible. At least everyone is safe. Waiting on parts is ok. But why not go with duel mass flywheel? Unless the 1.8 doesn't come with it? It's been a journey for sure. So playing with my cruze I fixed the large boost leaks & I'm going to another boost leak check after a week of driving. So I went from 3psi to 11 psi and wow what a difference in how the car drives. Be safe team.

[@cmattdabrat]

Thanks Jeff! It came with a dual mass flywheel, but they're pretty weak compared to, well, if I can get the engine to shear the bolts off a single mass unit. We'll get her all sorted. I bet! Big difference in those boost / power levels. Sounds like you're getting it sorted. Might want to do a smoke / boost leak down to see where it's leaking.

[@billychilders2270]

I give you props for being so leveled head about stuff breaking, I would have lost my bolt's 😂. Ps GT35 🙏

[@cmattdabrat]

LOL! Trust me, there's been moments when I want to burn the f'er down. At that point I just have to take a step back from it until I'm more level headed.

[@VinnyXL420]

Phong from PSI speed had a flywheel issue a while ago, he resolved it by putting back the little shim that goes between the flywheel and crankshaft, andthe m32 is no different, theres a shim there and it must be used. Apparently what caused the issue was vibration and other harmonics shaking the flywheel so much that it actually broke the CRANK. So make sure that shim is there. Those torque figures look about right, heres the procedure on a Z20: Flywheel/Drive Plate Tighten: 65Nm Tighten: 30 Degrees Tighten: 15 Degrees Those use a M10x27 bolt. The OEM flywheel bolts for your crankshaft are M9x23, so 60nm+45+15 seems about right.

[@garyhowe88]

The shim your talking about with phong is a diamond impregnated friction shim, stops the flywheel from fretting, as when it does it wears either the flywheel or crank and you loose the tension on the bolts. Seems to be really common on 4 cylinders than only use 6 or so bolts to hold the flywheel on. I just put two 10mm taper dowels as well and never had an issue.

[@cmattdabrat]

Looking at the manual, the only real shim there is the reluctor ring, but we'll get it sorted. With Phong's car, I could see that. I have my other crank that's fully balanced I'm going to toss into this one to get things going.

[@VinnyXL420]

@@cmattdabrat Maybe it was just the reluctor ring, it was a while ago since i did it. Anyway, i hope you get it figured out.

[@matthewfazenbaker8850]

I could really use that turbo

[@danssv8]

Nah not again Matt , just can't win mate. That Cruise got a curse on you. You'll get there buddy just keep going.

[@cmattdabrat]

Definitely a lot of learning curves, but we'll get there! Even with things fully working, I'm it would only be a matter of time before something else gives in the M32 driveline, but I'm up for the challenge.

[@ijxpanz]

That sticks

[@johnnyjohnryan12]

Long time fan so glad your making progress:) I've been trying to research on how to turbo my sonic with the same engine. Anyone know if thats doable or even worth it

[@cmattdabrat]

Thanks for the support Johnny! You could do it. Depending on how crazy you want to go with the setup, could be easy as pie, or a huge undertaking. The stock turbo setup that comes on the VXR would be a pretty easy turbo to add.

[@johnnyjohnryan12]

Alright ill look into that. What would you recommend for parts to start buying first? I want to get everything gathered before I start in maybe a year

[@louiewiessv5756]

Please keep making videos Gt 35!

[@cmattdabrat]

Definitely will! I'm enjoying it.

[@dannykirby7023]

Gt35.... That sucks you keep having trouble.. sounds like me and my trans that keeps braking on my 6.0

[@cmattdabrat]

Hopefully all this trouble saves someone from having the same issue down the road. We'll get her sorted!

[@dannykirby7023]

@@cmattdabrat yep just gotta keep pushing forward and one day it will all come together.. now you need some rims with those new zzp coil overs… I love zzp

[@michaelgeorge8675]

Damn was out in Houston for Tx2k also. Gt35!

[@cmattdabrat]

I so wanted to go, but my schedule just didn't align... and was hoping I could have brought the Cruze at least to spectate.

[@xt5life549]

Do you think if the bolt holes weren't enlarged or in other words messed with. The torque specs would be okay? I have specs stage 2+, steel flywheel about to put on myself

[@cmattdabrat]

I have their steel flywheel on the way. Looks like these are the torque specs.

[@cmattdabrat]

26 ft lbs, 30 degrees, then 15 degrees.

[@xt5life549]

@@cmattdabrat crap. I thought it seemed rather..excessive. guess il pick up some fresh bolts.

[@Civek559]

Gt35 nice

[@mauriciomartinsjunior6299]

what do you hear in the car, friend, I was thinking and turbo my cruze?

[@cmattdabrat]

No starter engagement so has to be the same issue. What engine do you have?

[@justinsummers7046]

Where did you get that intake manifold

[@cmattdabrat]

I made it. kzbin.info/www/bejne/gGnKindpl95gabM kzbin.info/www/bejne/kITYoJ1ubbmAp5I kzbin.info/www/bejne/e4C9eoJ3mLKNZ5I

[@SherburstGaming]

Ahh damn man thats super unfortunate!

[@cmattdabrat]

All part of modifying cars! :)

[@thomasnoyd5766]

GT35. Love the channel man

[@cmattdabrat]

Thanks Thomas!

[@PimpJuice914]

I wanna see this beast hit the track!!!! Gt35

[@cmattdabrat]

Me too! Hoping to get it sorted before the end of April and hit the 1/4 mile track her in Houston before they shut it down for good. April will be their last month after 35 years.

[@TVC1954]

GT35, looking forward to the next video

[@cmattdabrat]

Thanks!

[@itsdarooster8160]

Will the 1.4 turbo flywheel work I'm sorry bro you got luck like me but your alot better of a person than me

[@cmattdabrat]

They use the same flywheel. Only issue with the stock flywheel is it's a sprung dual mass and would eventually let go with good power. We'll get her sorted! Shit happens.

[@itsdarooster8160]

@@cmattdabrat dude you inspire me I love to watch your videos I

[@jasonkennedy5740]

Nooooooooo!!!! lol I think it's time for a lift!!! (Gt35)

[@cmattdabrat]

That would make things so much easier on my body lol.

[@strykerblythe]

I cant wait till the bugs are worked out on this build. That car is gonna be nasty. Gt35

[@cmattdabrat]

Same here! We're getting there though!

[@thodoris_kou]

What do you think about a used 2011 Chevrolet Cruze 1.8lt with 43K miles for 7.4K USD? Is it worth taking the deal for a daily driver car despite their issues?

[@cmattdabrat]

The 1.8 really doesn't have any issues. Only issues I had up until 122k and 6 years was the coolant return like, the plastic one that goes from the thermostat, to the throttle body, and the other plastic hose that goes from the throttle body to the coolant overflow tank, and the tank itself get brittle. It's a $75 fix and is easy to do. Aside from that, keep the maintenance up and it'll serve you well. I just keep throwing boost at mine until things fail.

[@jrod3926]

Wish I could turbo my 1.8 Cruze Gt35

[@cmattdabrat]

Just have to put your mind to it!

[@totypme]

Bad luck. The bolt holes looked to shallow. I think steel would be better keep them coming.

[@cmattdabrat]

Thanks! I think so too.

[@djinkentertainment]

Too bad the GT35 probably won't fit on my Sonic RS hatchback full of ZZP and DDM works parts lol.

[@cmattdabrat]

LOL! Just might! I take it yours in the 1.4?

[@djinkentertainment]

@@cmattdabrat haha yes sir.

[@nbdxchance9010]

Nice video😎 GT35

[@cmattdabrat]

Thanks ✌

[@herminiorivera213]

Matt your are a tough guy. I know you will get it figure it out but in the mean time, can we change the title from low budget cruze to the money pit cruze?

[@cmattdabrat]

Thanks! That's not a bad idea.

[@ashleywitry8101]

Gt35 keep up the good work

[@cmattdabrat]

Thank you!

[@jboy7339]

Your actually riding on the tow truck 🤭

[@cmattdabrat]

Haven't done that before, but he only had room for one person inside his rig, we just all rode together in the car lol.

[@CUBANCHULO149]

Gt35 turbo for me Matt!!

[@vegeto186]

God damn it Matt🤣

[@cmattdabrat]

lol

[@johnsnow1355]

Your problem is most likely aluminum and steel. Every modern aluminum head V8 breaks exhaust bolts off the manifolds due to heat expansion stressing the studs and bolts and they constantly break the heads off. Every aluminum head with a steel manifold dose it. Dont matter if u own gm ford or dodge they all leak at the manifolds

[@cmattdabrat]

Was the timing belt, but wont go back to an aluminum flywheel again. Even ZZP broke their bolts. Same issue with them sheering at 600whp.

[@orion2250]

The more I see people hot ridding the Cruze…the less I want to hot Rod mine..sigh, I love the car..maybe I’ll put subs and make my trunk twerk instead..keep up the greatness!

[@cmattdabrat]

Nothing wrong with having some beat!

[@gasparnunes9520]

Este motor é fraco ecotec

[@cmattdabrat]

really? kzbin.info/www/bejne/Y6TPXqerpJpqb7c

[@Slo_300c]

Man my Cruze just went down today to 🤦🏼‍♂️

[@cmattdabrat]

Yikes. Hope you get it situated. it happens.

[@Slo_300c]

@@cmattdabrat I always do I’ve rebuilt this engine twice now we will both get back on the road 🤟🏼

[@Sally-nd5pc]

👍👍

[@itsdarooster8160]

Gt-35

[@SherburstGaming]

So i heard somethin about a GT35...😏

[@cmattdabrat]

We have a giveaway going on. Shoot over to that video for the details.

[@idiotsavant7276]

It’s not a budget build if your keep rebuilding the motor… it’s just a money pit. Lol Good luck brother, if it was easy, everyone would have already done it.

[@cmattdabrat]

LOL! The engine is self is fine. Just the flywheel. Nothing too crazy. But you're right about that!

[@the8valveturbo]

Matt, wheres my comment gone? Not sure if you saw it or not, bit i talked about the engine you have, the ecotec and how vauxhall in the UK have the same. Is it a GM engine?

[@cmattdabrat]

Not sure. Didn't see it before. Sometimes of find comments that are marked as spam by KZbin. Any how. The 1.6 vxr, F18D4, z18xer, and 2H0 are the same engine, depending on displacement. The 1.6 is slightly different in the fact it doesn't have VVT and uses mechanical cams and lifters. Same block and head though.

[@the8valveturbo]

@@cmattdabrat ok, great Z18XER is an engine number i recognise. I have a Z20LET block, but the head off a C20NE. Anyways, what i was saying, was ive never heard of any flywheel having the problem you are, at least in the UK. Theres a company in the UK that make/produce billet flywheels (i have one on my motor with zero issues, and an eBaY turbo too), called TTV. If you search for them, TTV billet flywheel, you should be able to find the flywheel for your block with the correct bolts, though youve enlarged them now. And yes that would mean getting abother flywheel, but at least it would be correct with correct bolts and torque settings. They also do other billet wheels like crank etc, so its worth having a look? Also to note, and again i dont know what in your block, i have left in my balanced girdle in the block. Some guys opt to have them out. As a precautionary measure, the clutch is correct for your gearbox/trans right? And not shaking your crank to death? Im using a Helix clutch, as they have superb clamping pressure for boosted engines....

[@the8valveturbo]

Ive just done a search on their site for z18xer and some goodies pop up!!

[@cookieintune]

Not everyone has the audacity to modify an engine like that , but when their asses are being left behind they all want to do it .

[@cmattdabrat]

This is true.

[@isaacramos31]

Humm In California we can’t do that

[@cmattdabrat]

This is true. Some states are stricter than others, which isn't a bad thing.

[@kemfacts]

GT 35

[@edwardrivera3031]

Gtx35

[@ThatOneGuyWithTheEye]

How much power does this make? It seems like a giant waste of time. You could have built 2 ls rx8s for the time and money you have spent on this bucket

[@cmattdabrat]

LS RX8, that's original.

[@mypony7310]

Gt35

[@rednissanser]

GT35

[@matthewfazenbaker8850]

"GT35"

[@livelongmetal1392]

Where are you located? Ill let you work on the car in my shop for free I think the lift would benefit you

[@cmattdabrat]

Wow, that would be awesome. I'm in Houston, TX.

[@livelongmetal1392]

@@cmattdabrat Indianapolis and Texas sadly are kinda far away 😔

[@tomasthetomato1119]

GT35 GT35 GT35

[@mahdialsenussi3066]

💔👍👍👍👍

[@quillanthrasher6846]

And this is why I'm glad I just picked a Corolla over a Cruze. I commend your drive and effort bro but fuck Chevy

[@cmattdabrat]

Never had an issue with the car. But once you start boosting something, you'll find the next weak point. Corolla's are good cars.

[@natesun6886]

🤦🏻‍♂️

[@danieldegg1]

lol gt35