not everyone knows about the technique of welding thin metal thickness of 0.7mm

not everyone knows about the technique of welding thin metal thickness of 0.7mm
how to weld thin metal correct??? this is the technique of welding thin metal
This video is how to weld metal thin square tube using stick weld, this video is made for beginner welders, how to weld for beginners
Hopefully inspiring and hopefully useful
Don't forget to subscribe!!
#howtoweldforbeginners #welding #welder #beginnerswelder #weldingsquaretube #weldingmachine
Tag :
how to weld for beginners
how to weld for the first time
how to weld for dummies
how to weld for cheap
how to weld for beginners whistlindiesel
how to weld for beginners youtube
how to weld forged steel
how to weld for nasa
how to tig weld for beginners
how to weld arc for beginners
how to weld aluminum for beginners
how to tig weld aluminum for beginners
how to mig weld aluminum for beginners
how to weld aluminum tig settings
how to weld with a stick welder for beginners
how to forge weld in a gas forge
how to stick weld for beginners
how to arc weld for beginners
how to mig weld for beginners
how to flux weld for beginners
how to weld cast iron
how to weld copper
how to weld cast aluminum
how to weld cast iron with stick
how to weld car body parts
how to weld catalytic converter
how to weld downhill stick
how to weld downhill mig
how to weld dog cage
how to weld dual shield
how to weld different metals
how to weld disc brake mounts
how to weld door hinge
how to weld exhaust for beginners
how to weld exhaust pipe with flux core
how to weld exhaust pipe with mig
how to weld exhaust pipe with stick welder
how to weld flux core vertical
how to weld flat bar
how to weld flux 125
how to weld fuel tank
how to weld good
how to weld gold at home
how to weld gasless mig
how to weld gate hinges
how to weld gas tank
how to weld good beads
how to weld gas pipe
how to weld hinges on metal gate
harbor freight welder
how to weld horseshoes together
how to weld hdpe plastic
how to weld holes shut
how to weld hardened steel
how to weld hinges
how to weld hole
how to weld metal for beginners in tamil
how to weld metal for beginners in hindi
how to weld jewelry at home
how to weld gold jewelry
how to weld with jumper cables
how to weld permanent jewelry
how to weld aluminum jon boat
how to weld a trailer jack
how to weld kaliskis
how to weld go kart frame
how to weld a kayak
how to weld a knife
how to wield a katana
how to weld a broken key
how to weld a dog kennel
how to weld a go kart
how to weld like a pro
how to weld lead
how to weld led strip
how to weld lithium batteries
how to weld lincoln electric
how to weld loops on fly line
how to weld leaf springs
how to weld laptop hinges
how to weld metal for beginners
how to weld metal for beginners mig
how to weld metal for beginners stick
how to weld metal for beginners malayalam
how to weld metal for beginners tig
how to weld aluminum
how to weld exhaust pipe
how to weld stainless steel
how to weld cast iron
how to weld plastic
how to weld copper
how to weld with a wire feed welder
how to weld mig
how to weld a muffler
how to weld aluminum with tig
how to weld a flower
how to weld an exhaust
how to weld aluminum with a torch
how to weld a rose
how to weld aluminum with spool gun
how to weld brass
how to weld better
how to weld body panels
how to weld brass together
how to weld bronze
how to weld better with stick
how to weld beads
how to weld brass pipe
b welding
how to weld cast aluminum
how to weld catalytic converter
how to weld cast
how to weld cast steel
welding thin stainless steel
welding thin aluminum
welding things
welding thin stainless steel with stick
welding thin stainless steel with mig
welding things to sell
welding things together
welding thin metals
welding thin stainless steel tig
welding thin cast iron
welding thin copper
welding rod for thin metal
arc welding for thin metal
welding thin pipe
welding thin plate
tig welding thin stainless pipe
welding thin wall tubing
how to weld cast iron with mig
how to weld cast iron with stick
c o to welding
c welding
how to weld c purlin
how to weld c channel together
how to weld downhill mig
how to weld downhill
how to weld different metals
how to weld ductile iron
how to weld door hinge
how to weld door panels
how to weld exhaust
how to weld exhaust tips
how to weld exhaust manifold
e weld plasma
how to weld flux core
how to weld for the first time
how to weld fence
how to weld for dummies
beginners welder kit
beginner welder machine
beginner welder projects
beginner welder setup
best beginner welder
beginner tig welder
beginner mig welder
beginner stick welder
beginner welder
beginner welder tips
beginner arc welder
best beginner welder harbor freight
best beginner welder mig
welder machine for beginners
cheap beginner welder
welder for beginners
best beginner tig welder for aluminum
good beginner welder
beginner mig welder kit
best beginner stick welder
best beginner tig welder

[@MrBilld75]

I kinda learned this naturally, when welding thin metal. I was having trouble with a more straight angle on the rod. But on more of a slant and drag, I had an easier time. You have to move fast with thin metal and dragging at a steep angle, rather than more straight and upright, helps you move more easily and faster, but still lay down some rod/fill and get good penetration. It's tricky to get the travel speed right and keep moving so as to not burn a hole through, but get good penetration too. And your amperage has to be dialed in just right, not too high or low. So just go amp by amp testing it, until you are not sticking the rod, but are not burning too hot/aggressive and making holes. It's typically a very narrow range and your perfect balance may be in a 1-2 amp range only, like mine, 23-24 amps no higher or lower using Fourney rods, 6013 at 1/16th on a DC Inverter welder. There is a magic number for your machine, metal thinness, rods and application and everyone's is a little different. But nobody welds this thin at anything over 30-35 amps with 1/16th 6013 rod and most are in the low to mid. 20 amp range and even lower if you can and it works and doesn't stick the rod. Another approach, is to peck and lift and then peck again, just as the metal cools a touch, from being molten, but before it loses the red colour and is still semi molten. It's like a 1/2 second to 1 second pause between each peck and lift and it works good too without burn through. That's how I started and a lot of people do, with peck and lift. Then learn/practice running continuous welds, using a more slanted angle on the rod, just like you did, yup. Doing it according to welding logic and teachings, (hold the rod upright, with just a slight slant and using a slight rocking motion), was much harder I found on thin metal and rods. Very sloppy welds and hard to strike and maintain a steady bead, puddle, flow and consistency. That more upright stick position is correct and great for using thicker rods on thicker steel and joining angles and joints etc., typically, but NOT here, on thin metal and rods. You have to throw some of the rules out the window, lol and try something different. It's because of the fast travel speed, rods and thinness with this I think (but I'm a newbie, so I don't know much), that dragging on a steeper angle like that, just works better. And the professional welding channels on KZbin do that sometimes with thick rods and metal too or certain kinds of rods and metal. One guy said "as I move you might see me change to more of a slanted rod position than upright and that's just my style, I always weld in the most comfortable position for me. So don't try to copy my every motion or position, because you may be different. Only if I say there's a reason to be in a certain position for a certain application/weld, should you try to copy my motions/technique." This would be one of those times he was referring to, indeed, that you would want to copy the stick position of the welder in the video. About the same angle you were at, is very close or the same slant I put on mine, somewhere around a 45 degree angle, give or take, but 45 is a good starting angle and right in the middle of straight upright and flat.

[@aculasabacca]

I would say the pecking is best when you need to get something done and then with time and practice you get to where you can continuous weld but no shame in pecking.

[@MrBilld75]

@@aculasabacca Yeah, that's how I started with the thin metal. Peck and lift and then as I got the hang of the speed and characteristics of welding thin metal without burning through, I worked on going in longer, more continuous lines. But a lot of people, when dealing with thin metal, do peck and lift. Welding the continuous lines on thin metal, is tricky to get good penetration without burning through and it seems as if raised arcs like his (and mine turn out), from a long arc are almost inevitable to run a continuous weld with decent penetration and no burn through. Maybe with more time and practice that lessens, but you're moving at such a quick travel speed with this, that it's hard to avoid raised welds and long arcs and spatter. It's certainly a knack and takes practice to get it. And the best way is to take it step by step, as I told someone in another comment thread I saw you in. About what amperage the person should use to do thin metal and you said "as low as you can go without sticking". Yeah and I added "most people do it at 20-30 amps and never over 35 usually, using 1/16th 6013 rod". On mine, the magic amperage seems to be 24, to not stick but not be too hot/aggressive either. On 22, I was sticking a lot and that's as low as mine goes. I had to do it in stages and be patient with my progress, because it would be too frustrating to master all of the tricks, changes, characteristics etc. at once. Like first, peck and lift get a feel for it so as to not burn through, then run short bad penetration welds, then work on getting longer, better penetration constant welds without burn through and so on. Patience and practice is key to this, absolutely. Getting the travel speed is tricky, because it's fast. And dialing in amperage is tricky too and getting a good balance between not sticking and being too low and not being too high and hot so as to promote burn through. So your comment on that was spot on and great advice. Take it amp by amp, one at a time, because the perfectly balanced power/number, will likely be at only a certain narrow amperage. At least that was my experience with my welder. Go above it by 1-2 amp and it's too hot/aggressive, go below it by 1 amp and more sticking. So 24 is my perfect number with those rods, on exhaust pipe metal thickness anyway. Have not tried anything thinner yet. That was challenging enough for a newbie like me, lol.

[@malcolmkelly8118]

This was very helpful. I’m a mechanic who doesn’t weld. I just purchased a stick welder and practiced on a flex pipe and complete melted through it on 75 amps 😅. I lowered it to 35 and had better results but it would stick. I got the hang of it A BIT. everything you’re saying makes sense, and I will be back to practicing tomorrow.

[@MrBilld75]

@@malcolmkelly8118 That's why I bought mine, vehicle work, but it's handy for soooo many other things. Those DC inverter welders like I have and likely what you got too (cause they are cheap and are fine for everything on vehicles) have certain features on the slightly more expensive ones (like the Hitbox brand on Amazon, still under $200). Like "hot start", "arc force" and "anti stick" features, that make stick welding thin metal even easier. Another two tricks I saw that should help on thin metal are A:) If you have a DC inverter welder, most of them are capable of DCEN (DC Electrode Negative, check your manual though), which is less aggressive than DCEP (electrode positive), because you are taking electricity from the negative/return side=less chance of burn through. You just switch your cables around, the stick goes on the negative and the clamp is now the positive. (no worries, as long as your welder has this feature it is not dangerous whatsoever). And B:) when working on flatter than exhaust pipe thin metals (which you will be doing too, no doubt), is to use a chunk of flat thicker metal behind it Whether magneted on or clamped on. It will act as a heatsink and pull excess heat away from the weld helping avoid burn through. Might even work for welding non closed up exhaust pipe, if you can get a piece of curved stuff in there, like a smaller pipe or half a pipe piece? This heatsinking method of putting metal behind the thin metal is the "only" way to successfully do the razor blade challenge with a stick welder. It usually can only be done with finer welding methods like Mig and Tig and technically should be impossible with a stick welder. Well, it's not if you use that trick. Look it up here on KZbin, "razor blade challenge stick welder" and you'll see what I mean. He explains how the heatsink method works and weld the blades together. It is exactly what it sounds like, welding the edges of two razor blades together (lap joint, not razor's edge to razor's edge that's impossible). It's an absolutely AWESOME tip for thin metals, if you can get something behind it to soak up that heat. Dramatically reduces burn through/eliminates it and allows for excellent penetration. I get that might be impossible on some/most exhaust pipe jobs (cause closed, ultimately), but with welding car metal, you will be using that welder for a lot more than exhaust pipe, believe me. Especially if you drive and fix other people's older vehicles like me and have to deal with rust and salt in the North. KZbin will become your best friend as a newbie welder, it sure did become mine.

[@tatertots-n-soup]

@@aculasabacca except then; youre a lousy welder doing terrible welds and that would be the only shame

[@daviddahl2118]

Best way to weld thin metal period is to reverse the polarity on your portable welder sharpen a carbon stick, clamp it in your stinger and use silicon bronze, you can weld paper thin metal and will tear the metal before breaking the weld. We used this method welding 22gauge conductor pipe for blow pipe and welded miles of it.

[@MrBilld75]

Yeah, that's super handy actually! I did DCEN (DC electrode negative) and it can be a great way to prevent burning through thin metals. It's less aggressive than DCEP, because the electricity is on the return side of the loop rather than start of the loop.

[@carpathianken]

I usually weld steel section that's 10mm minimum, but if I ever came across steel this thin I would have burnt a golf ball sized hole in it within the first 2 seconds. Video's like this are going to save me from buying a mig welder yet.Cheers

[@drizler]

The only reason I bought my HH 135 was to weld body panels and fill holes I blew through in heavier stuff . Honestly nearly 20 years later I still grab my Lincoln Tombstone for almost everything . Having a model with DC really helps as well! It’s just quicker and easier than all that setup time, changing rolls ect. In the end they both do the same job and a quick lick with a grinder makes ugly welds pretty enough . The only thing I did to mine was put on a pair of lead extensions which makes it necessary to run it a tad hotter sometimes by one setting.

[@oxyfee6486]

If you are learning from this video, please wear a respirator while welding galvanized metal, even a respirator might not be enough.

[@karlburmeister1552]

Either grind it off or use muriatic acid. Super bad to breathe that.

[@LFSIDIndonesiaOld]

thanks for this advice 🙏

[@theravedaddy]

You think anyones worried about a bit of galvi with all the crap thats being forced into them right now?

[@oxyfee6486]

@@theravedaddy 😂

[@theravedaddy]

@@oxyfee6486 seriously tho, if hes out here in the wild they're ordering them to get 4 pokes now or cant walk in the streets!

[@gregsavige3587]

Thanks for the lesson. You make it look easy. 👍👍

[@leolizardo]

very good technique bro. thanks.

[@mp-ck8gm]

Please could you say what settings the arc was on? AC and voltage and amperage. Thanks.

[@andyschlamp7766]

What rod would you use for that?

[@user-wu1jc7zr4y]

Your sign language is more understandable than some expert explaining this in English over 5 minutes. Subscribed.

[@brauliorpflores1172]

😂 Obvio que no paisano, cuando te dedicas a soldar materiales de ciertos espesores te acostumbras pero explicales que: -se inclina el electrodo para evitar que el calor se concentre en un punto y perfore el material -si no tienes experiencia es mejor puntear que cordonear -se solda con E-6013 de 3/32 aproximadamente entre 20-30 amperes dependiendo la maquina que uses -si es galvanizado usa un poco mas de amperaje para quemar el zinc. Para quien ya tiene cierta experiencia esto parecería lógico, pero la gente se queda con dudas. Que gacho que la mayoría de los videos que suben ( no solo tu, en general) solo buscan likes. Saludos. 😂 🖖🏼

[@_Marcia_]

O seu comentário ficou mais completo, bem mais explicado do que o próprio vídeo, parabéns.

[@stevenmonson5149]

Obviamente es muy frío quizá 1/16 con 25 amps con electrodo 6013

[@soydechileyque]

6010 3/32 45 AMPERES. PUNTO RAPIDO.

[@juandarosa5076]

Polaridad inversa (pinza porta electrodo en +) para disminuir el calor en la pieza

[@VESTA-CB-CROSS]

Ты сам сними свой видео и покажи людям, прежде чем умничать

[@albeirobetancourt3446]

Amigo eres UN GENIO quisiera aprender a hacer eso te felicito q equipo usas q electrodo q amperaje y q me recomiendas gr6

[@jdlane5136]

What was the stick welder set on and what brand/model?

[@misaelperales4631]

Excelente técnica grasias por compartir

[@DIDSTY]

Bonjour, merci pour vos vidéos elles sont bien, mais pourriez vous ajouter la taille des electrodes et le courant de soudage à titre d'informations. Cela completera parfaitement la vidéo

[@ThatFijianGuy]

Thanks for the videos buddy learning alot👍👍

[@robertalkemade989]

nice weld is 6013 stick best to use?

[@bertkilborne6464]

That's very impressive !

[@gibadoni8917]

Cara,eu fico sem palavras,vc é um soldador simplesmente fantástico!!

[@mujibfaisal3345]

Terimakasih om. Manfaat sekali. Buat pemula seperti sy om........... 👍👍👍👍👍👍

[@paolocortez2842]

Nice weld sir how about the strength of metal specially thin galvanized if the weld is full is that ok sir to full weld stick is also strong weld I want to know if the strength of thin metal is decreased or not

[@Pillados-]

Quedó muy bueno, que amperaje usaste? Tierra en negativo o positivo?

[@damienrobinson5397]

what setting do you have the welder on?

[@josetadeu3746]

parabéns 👏👏👏

[@garylangley4502]

Thank you for the video. I'll try this soon.

[@stevebranham2599]

the only thing I got from this is that it's possible and use a low angled rod, what rod ? 6013 is what I have, because I learned that it's a low penatrating rod, what amp settting ?, and my welder is an AC cracker box, I can't switch to DC- as I was told in the other video I watched. I subscribed to your challel and I see that you have a ton of them so any help and recommendations you can give for someone with limited equipment would be greatly appreciated. Thank you

[@elarmeroalquimista]

What stick diameter and what amperage you use master tell please

[@neoanderson7697]

You are really an expert

[@yonobejosusilo6059]

wah master iki....

[@vaughnslavin9784]

Thank you!

[@user-os3yn3ug3o]

Интересно было посмотреть,пригодится...

[@gilldarius]

que amperaje utilizas, y donde colocas masa y portaelectrodo

[@dandexinventor]

Thanks for the tips and I hope you and the other viewers know how dangerous it is to weld galvanized metal...don't learn the hard way!

[@inocbroncano5410]

Your like saying dont do anything,... More dangerous that galva smoke

[@user-ij2rn4zi3s]

Всю машину так переварил ваз 2110, просто нет денег на полуавтомат,все получилось прекрасно,но нервов ушло очень много,больше никогда не буду таким заниматься,если все идеально встык как на видео,то легко,но в реальной жизни все иначе... Удачи всем.

[@KurskiyYa]

Я тоже эл.сваркой 2110,затем 10л.отьездил,продал и она еще у другого 3год на ходу.

[@its-2555]

я вот чет совет этого видео не понял нихрена, что на 1, что на 2 одно и тоже чувак сделал

[@user-hd1pn1qk1q]

Он показал правильный угол наклона электрода

[@user-ie2hh8fi6l]

@@its-2555 в первом случае он непрерывно заварил,а во втором с отрывами электрода,разумеется наклон сделал более острым чтобы температуру дуги немного отводить по поверхности а не в лоб так сказать.

[@user-ie2hh8fi6l]

@@user-hd1pn1qk1q в первом случае он непрерывно заварил,а во втором с отрывами электрода,разумеется наклон сделал более острым чтобы температуру дуги немного отводить по поверхности а не в лоб так сказать.

[@TV-io1cb]

I've been a welder for 25 years, but you're a great teacher.

[@tonythomas951]

Im with you. Actually I'm an electrician of 40yrs but have welded when needed that entire time and this guy without saying a word shows me something that I hadnt considered. Id always back up my weld with a copper plate. Ill have to try this tomorrow and see what happens. Also want to try that with the MIG.

[@dannybarnaby7101]

Didnt both the welds crack ? Not much of a teacher making a weak joint .

[@DmitryVandit]

За 25 лет можно всеми видами сварки научиться и владеть профессионально. Плохой ты сварщик видимо 🤣

[@shayson1357]

if you're a welder you should have told him not to weld galvanized before cleaning it.

[@user-gw1oq3rq2n]

Братан, все понимаю, но это же цинк. С него люди болеют. Головная боль, рвота и все такое. Будь осторожней.

[@mikedemaio2611]

Well done. That takes skill

[@REBUILDLab]

What kind of setup was there pleae? Amperage, the stick was + or -? Thanks

[@jpowers667]

What a pro!! very nice

[@ignaciomartinez718]

Very nice BUT WHAT ARE THE SETTING ON THE WELDER? For the tin metal

[@aculasabacca]

Low as you can without getting stuck. Keep in mind worn out or cheap machines are going to give you a hard time especially with lower settings.

[@MrBilld75]

As low as you can go, as aculasbacca stated here, without the rod sticking. Typically about 20-30amps and usually never over 35amps max. And there's some other pro tips that help. You must use thin rod, like 1/16th only. Preferrably a rod that has low to medium penetration and isn't a violent, deep digging aggressive rod like 6010 or 6011. More like a 6013, which is typically what most people use for thin metal. You definitely want a fast freezing rod like the 60xx ones, but not an aggressive rod, as it will burn through/keyhole way too easily. The key to success, is be patient and don't worry if you burn though, while practicing and multiple times too. It's inevitable and WILL happen. It's tricky and takes multiple attempts and changes in travel speed, distance from the metal and angle of the rod (although this guy's video helped and going on a more extreme slant angle, like he did, certainly does make a difference and I discovered this naturally). I was having a lot of trouble doing it how you would approach a thicker metal/weld, where the practice/recommendation is to position more upright and straighter with just a slight angle and rocking motion. Not here, that's actually harder and a steeper angled drag like this works well. And as we know, long arcs/distance is not the way to make good penetration, clean nice welds, but with this, you have to defy some typical welding logic and break some rules, lol. That log arc and lower penetration/raised weld and spatter, is kind of a good thing here, because it helps avoid burn through/keyholing. Just have to make sure that you still are getting good penetration that's the only thing you should make sure you are getting and that, is the trickiest part, is getting the balance. It took me a few hours of practice to get it to where it was not keyholing, but getting good penetration too. It's a delicate balance and don't shoot for that right away in practice. Just get through it without burn through and get your travel/speed etc. right first (and it's rather fast with this, so be ready to move). Then worry about improving the strength of the weld/penetration as you get better at it. Trying to achieve everything at once, is too frustrating and hard. This is a process and failures and successes and taking it step by step. And you will fail, this is tricky. But once you get a feel for it and put all that together, as a comfortable process for yourself, you will be able to weld thin metal and have the "knack" for it. Just be patient and practice, practice, practice. Even the pros who do videos on it, still burn through/keyhole the odd time. I was burning though lots at first and then as I got my travel, distance, power, angle etc. fine tuned, I burned though less and got longer, nicer welds without keyholing and then got better at penetration, because I noticed on my first attempts I wasn't getting full penetration and they were kinda weak. It's a timing thing, very much so. You have to know just how long to stay in the pool and then move and it's a very fast travel. Faster than you go with thicker rods and metal. They will always be higher raised welds and require more grinding/finishing, because the distance you have work at and long arcs, will just naturally do that and if you try to improve that too much, you may risk burn through and more frustration. So just be aware, that your welds on thin metal, may never be as nice and relatively flat as your thicker metal and rod welds, nor as pretty.

[@Slavik_b]

@@MrBilld75 очень хорошие советы, спасибо.

[@rolandosanchez8194]

Hola qué AMP usaste??

[@yewwtooob]

Yes, contact spreads the heat evenly. You can also back it with brass or copper

[@MrBilld75]

Yes, that's a really cool trick and the only way to do the razor blade challenge with a stick welder. Using a backing metal as a heatsink, to draw heat away from the area quickly and avoid burn through. The razor blade challenge, is a KZbin/social media welder challenge, to weld the blades of two razor blades together without burning through (on a lap joint of course, not literally blade edge to blade edge, that's near impossible) and just welding the thin sharpened blade sides together in a lap joint, is challenging enough. The heatsink is about the only way a stick welder can achieve it without burn through/keyholing. The guy doing it, just wanted to prove, that mig/tig welders were not the only ones who could do it.

[@OlszkoolCustoms]

Thank you.

[@user-ee2gu4os6t]

What is the ampere used in welding? Thank you

[@alandavis6429]

Well when you start grinding the galvanized off the base metal before the weld the weld won't crack when you grind the galvanizing off after you weld.

[@arvindkumar-qk2em]

I am learning how to welding. While welding electroc get stick again and again on metel. Am I doing mistake or its welding machine issue Please help

[@mmb811]

Thank you, great video

[@mathieuraedemaeker2201]

Hi what is your setting? Starting arc ? Welding amp? Rutile? Thanks.

[@AzgarbashaBasha-tb4gv]

Super Thankyou

[@ronaldoleksy8264]

Hey what setting you have an rod?

[@andreadiaz3514]

Increíble amigo q máquina usas como está conectada q electrodo y que amperaje soy un aficionado saludos desde colombia

[@samueloseaspartidagarcia8086]

CUANTO ES EL AMPERAJE CORRECTO?

[@newry123]

What ampage do u set welder too

[@Nostradamus_Order33]

What are the Amps? DC or AC arc? Electro Positive?

[@TunaCat929]

What rod are you using?

[@johnmetrac2898]

Great video I’ve learned a lot from it thank you 🙏

[@emilianolus9215]

Genious !... Which diameter you used 1.6mm and which amp? Salute you from Argentina

[@nikgavrilov993]

How many amps did you use? It is the most critical moment with such thickness.

[@norulzanamohamedsamuri1364]

salam saudara. Rod berapa mm? Api berapa amp? Mantap. Lagi mantap kalau berbagi settingnya bro.

[@saeppudin7948]

Btul tuh,

[@andreadiaz3514]

Amigo eres un verdadero no pensé que eso se podía hace me puedes decir qué equipo utilizaste qué amperaje y electrodo soy aficionado y principiante un abrazo desde Colombia

[@humbertoenciso1055]

A qué amperaje está soldado para poder aprender gracias soy de Ibagué Tolima Colombia

[@user-ud7qb8uz2l]

Faltou mostrar como voce regulou a maquina para o tipo de electrodo que usou para esta espessura do ferro.

[@mattwaters6987]

Good job.

[@widodo8354]

Trimakasih atas ilmunya

[@billyjayarbuyes6575]

What kind of rod you'd used,how many amperes?

[@jokermalaka8951]

thank you🙏

[@Loverboy_Bernice1977]

Thank you so much

[@DeniseWeston-vt2fx]

That was impressive after you hit it with the grinder i was sold. Sometimes ya dont have access to the many tricks out there.. cool video

[@aadbengkellas1820]

Trimakasi ilmunya om

[@bengkellasndeso4913]

Skil yang luar biasa.. 🙏

[@0fficial_store]

Incredible

[@kimberleydiann771]

Can you tell us what amps?

[@williamwilcox-rd7cx]

Yes speed and heat control (stick angle)are major factors when welding thin material . Great vid 👌 👍.

[@petrustefanvarga6617]

păi spune : ce electrozi folosești și la ce amperaj sudezi ,dacă ești așa mare meșter !!!

[@walterteruel873]

O cara é muito bom.

[@TrionoBara]

👍👍👍

[@emmanuelcalicdan7556]

How many amps sir?

[@manuelitoima1291]

Que amperaje uso? Que electrodo uso?

[@kembardiy6848]

Terimakasih sharingnya bosq

[@julioandojera1819]

How many amps.you use?

[@echootehnikwelding7141]

Nice 👍

[@glennlopez6772]

Great!

[@projectvictoire2282]

Setting the right current and selecting the right size rod is also very important.

[@shitmonkey]

it would be nice if he included that info

[@jensejense]

2,5mm 6013 it looks like

[@makantahi3731]

what is electrode dimension, current?

[@user-bw5lq9xz6s]

Профессионал!!!

[@kahingalofficial]

What kind of welding rod do you used?

[@markrosinski4814]

6013

[@JorgeHernandez-lk9to]

Gracias amigo por tu aporte en soldadura y cuál es lo amperios a usar y electrodo que calibre gracias dé antemano 👍

[@reynaldomedina619]

Son 35 o 38 amperes y 6013 varilla

[@user-kg2od3be8l]

Талантливо объясняете👍

[@marcelinosanantonio2161]

2.0 mm electrode are the real trick of this tutorial video if you want to weld some thinner material find a thinner electrode

[@user-xy8op8io1z]

Все верно👍

[@BrucesShop]

Flux core is like thin DC stick. I use it as my Ac welder runs too hot.

[@marcelinosanantonio2161]

thin electrode=low amperage= less metal stress= good weld fusion on thinner material

[@user-rf5ri5qe4g]

先订阅，抽时间再看！谢谢分享焊接技巧。

[@MrEye4get]

Cool technique but what rods and settings do you also need to use?

[@stanfortsafra712]

Seria bueno que mostrara que electrodo uso y a que potencia

[@ITTCcup]

Pois é...concordo ..que adianta mostrar que consegue fazer se maioria que for tentar vai furar a chapa por falta de informação

[@a.m8686]

Itu di beri brpa volt bang🙏

[@wiliamdrakeelitedangerous4699]

how to filing hols?

[@sentotmulyaji1230]

Pake kawat 1.6 kah bang

[@juangallegos4508]

Lo único que le falta es especificar el diámetro del electrodo y el amperaje de la máquina

[@Accumulator1]

Good choice 6013 less penetrating. Also laying bead away from the edge instead of towards it. Burning galvanized coating dangerous fumes.

[@ChristopherJones16]

I’m a noob but didn’t he lay bead towards the edge when he first started laying it and when finished was he now laying bead away from the edge? Or do I have it backwards? Also since there’s two edges would he have to lay bead away from edge halfway and then change his hand position and start to lay bead away from the other edge working his way towards the bead he just laid?

[@MrBilld75]

6013 is the rod of choice for this by many on KZbin for thin metal stick welding (and only with 1/16th rod). Precisely because of the lower pentration=less keyholing potential, unlike aggressive deep digging rods like a 6010 or 11. They are too violent for this, but you DO need the 60xx characteristic of "fast freezing" for this, absolutely, as it helps combat burn through/keyholing.

[@NathanWeld]

I will try the trick you have given ☺

[@johnbraynecamero1530]

Don't try that that's not the proper way of welding if you try to bend that or there is a bending motion that weld will definitely break. The second is more likely hold the two pieces properly

[@robertthomas6127]

@@johnbraynecamero1530 ... His weld is full with slag. I'll bet he just welded over it again. His rod is much to thick for 0,7 mm material. If you spit on it it will fall apart. He doesn't show the reverse side and why 😉

[@user-nk2ub9hr8c]

Красавчик!!!

[@YYCRCFabricationz]

You may want to think about grinding off the galvanized coating first before welding it where it then becomes a toxic gas that you're breathing in and failing to tell yur students about. Just saying, as that would be the first thing a trained welder would teach a student before worrying about the metals thickness.

[@vittocrazi]

Thats very true

[@Then.72]

Correct! Galv flu

[@adamsesquillo2779]

some welding machine can't do that when you lower the current out can't burn the welding rod .. it's still on the welder itself off how he can weld the piece together... I have another steps for that, it doesn't require you to lower the amps

[@chuckmaddison2924]

Was wondering how many amps used.

[@rahultj89]

What is the volt and ampire !