Not Your Everyday Furniture

[@FortressFineWoodworks]

Use code FORTRESS40 to get 40% off your Hungryroot order! bit.ly/4cpvCrI

[@WoodworkingTop535]

great videos

[@jeffreytgilbert]

My step mom worked as a nail tech doing acrylic fingernails and thats all i can smell when cutting acrylic.

[@Double_Wood]

The close-up camera was a great investment. I think it really helps us see the real level of detail and thought you put into these beautiful builds!

[@FortressFineWoodworks]

I'm glad its paying off then. Thanks for noticing the fine detail!

[@Just-Make]

​@@FortressFineWoodworksAgree, really great shots. May I ask what camera and lens you are using?

[@cjlamber]

Tiles, acrylic, wood and brass. What an incredible combination. Not the lightest materials. Glad I didn’t have to install them. This was my first video since subscribing and probably the most impressive project I have seen on KZbin for a long time.

[@FortressFineWoodworks]

That is quite impressive then! Thank you for taking the time to watch and comment!

[@missdee212]

For the wood. In tiling floors they tile over the concrete board instead for wood floors because the wood soaks up the moisture from thin set. Which causes it to expand & then it dries which means it expands & shrinks unlike that glue you used for the corners of the tiles

[@FortressFineWoodworks]

Exactly, the plywood expanded the shrunk, breaking the bond

[@antonvas100]

Bonding tile to wood is possible by using a liquid waterproofing membrane which bonds to wood great and allows a strong bond for thinset to waterproofed plywood.

[@bks_cord3736]

What a piece of art! Absolutely stunning. I love your videos. I don't know why but they are extremely relaxing.

[@FortressFineWoodworks]

The fact that you watch and enjoy my videos means a lot! Thank you!

[@ExpectMiracles55]

"I have a perfectionism that is beyond comprehension..." well. that is shown frame by frame, your attention to detail is second to none! And the end result is nothing but fabulous. And when unforeseen disaster strikes you simply (patiently 🤣) clean the mess and find a suitable solution for yet another masterpiece in your ever expanding portfolio. Loved to see your client's reaction, well deserved!

[@davepowell7168]

Stop procrastination by proxy and get on with your work, those mistakes don't just make themselves 😁

[@FortressFineWoodworks]

Great comment! Thank you for your time!

[@DaleDix]

You are narcissistic. This guy is a humble, teaching, artistic master.

[@jasonbissonnette2331]

Simply stunning! As i have said many times before, you are an amazing craftsman and your attention to detail is second to none. Thank you for sharing and inspiring.

[@FortressFineWoodworks]

Thank you as always! I appreciate you!

[@missdee212]

This piece of furniture is so damn beautiful. You never cease to amaze me with the ideas & engineering you do to utilize or fix materials with your wood working

[@FortressFineWoodworks]

I appreciate that! Thanks for watching!

[@bbbildhuu]

He didnt design it. He ripped off a designer.

[@asmolyeti6689]

I was absolutely shook when I saw two of them This whole time I thought you were doing only one Finding out you did twice the work that’s crazy Good job incredibly beautiful

[@FortressFineWoodworks]

I appreciate it. Thanks for taking the time to watch!

[@krishnarajak621]

Why this man is so under rated with the work of art in his hand he should have millions of subs till now so it is our job to give him a raise In 2025 this should be the most viewed channel on KZbin 😊

[@FortressFineWoodworks]

Thank you for also making my day. I very much appreciate you taking the time to watch and comment positive things!

[@josephtsumba750]

Very good topnotch woodwork. Keep it up and keep the tips coming. We are taking notes.

[@FortressFineWoodworks]

haha take those notes. There will be a test! Thanks!

[@Ell_Pacino]

I'll be honest, this very neatly fits into my current definition of 'furniture'

[@FortressFineWoodworks]

Well perfect!

[@dtreinson]

Absolutely incredible build! Really inspiring to see you combine so many different materials to create such a phenomenal piece, and not just once in this case but twice!!

[@FortressFineWoodworks]

Ah! Thanks so much! And thanks for taking the time to watch and comment!

[@DavidAdamsen]

That is some incredible work! You deserve to be up there with the top woodworking youtubers for sure!!

[@FortressFineWoodworks]

Wow, thank you! I appreciate you taking the time to watch and comment!

[@inmyimage1081]

Seeing the woman and how expressive she was leads me to believe she is probably pretty social and will talk you up to all her friends.

[@FortressFineWoodworks]

I agree, she is very kind, and happens to be a referral from her brother.

[@dwayneford1990]

They turned out so beautiful! Excellent work.

[@FortressFineWoodworks]

I appreciate that, thanks!

[@guskike]

Those are beautiful pieces, most definitely you are a Master in your craft. I have enjoyed the video as well.

[@FortressFineWoodworks]

Im so glad you enjoyed it! Thanks!

[@petrbocek4311]

Man, your channel is so far so under appreciated. I am a joiner with 30 yers of experience and I have to say that I really enjoy yor videos. Great content, perfect comments, good tips…. I just love it. Please keep doing it nd I am sure you’ll have million subscribers soon. Thank you

[@FortressFineWoodworks]

Thats very kind of you thank you! I appreciate you taking the time to watch and comment because it helps this channel grow!

[@jimrosson6702]

Wow your attention to the details in this one are outstanding these are not my cup of tea to say but they turned out amazing. Great work. Thanks for sharing

[@FortressFineWoodworks]

Well even better if it's not your cup of tea and still amazing! Thank you!

[@ericluba6287]

I haven't been able to make anything in a few years. Do do losing a place to work and profession. But the process in figuring out. Tons of different ways to do a process. Is always been my favorite part of making things

[@FortressFineWoodworks]

I agree, there's always a different way to do something

[@marknelson4615]

I agree with using screws for plywood carcasses when they will never be seen. Also with you on high quality drawer slides, but can’t get along with finger joints. You have an amazing attention to detail, great work!

[@FortressFineWoodworks]

Yeah the finger joints are up for debate. I should just get a dovetail jig. Thanks for watching!

[@marknelson4615]

@@FortressFineWoodworks Watching was a pleasure. I like to mix materials and techniques in my work too. Half blind dovetails for drawers are pretty easy with a jig.

[@realtytalk]

I already had crazy BIG respect for your skills, but honestly, this one blew my mind!

[@FortressFineWoodworks]

I appreciate that so much. I'm thankful the clients trusted me with such a unique build

[@rocknthehawk]

It's nice to see what it really takes when using new and different materials- just went through the frustrating process doing custom sofas with walnut and brass trim pieces. If you use a caulk gun more than once a year a battery powered version is one of the best tools I've ever bought.

[@FortressFineWoodworks]

Those sofas sound like a fun project though! Thanks for the tip, I've always wondered if an electric caulk gun is worth it.

[@mike5695]

Wow another absolutely stunning piece, you have incredible skills. Love the videos man keep them coming brother.

[@FortressFineWoodworks]

Thanks Mike! I appreciate you watching!

[@nugreg24]

Beautifully done, this is a masterclass in ensuring the details are as close to perfect as possible!

[@FortressFineWoodworks]

Great job on the careful word choice! Since perfect is nearly impossible to reach!

[@keithklein4538]

Hi, Marvelous! I applaud your courage in trying new materials. The results are beyond good and border on museum quality. You are getting better at using brass, but you might want to consider some dedicated metal working tools to make the work easier and safer ( although I’m glad to see that you used protection when using the track saw) . One very small remark. The oak was quarter sawn, not rift sawn. Rift sawn has grain which is diagonal on the end of the board, flat sawn has grain parallel to the long side (face side) and q.s. grain is perpendicular to the face. In white oak this exposes the medullary rays for th “ guitar wood” figure. Cheers, Keith

[@FortressFineWoodworks]

Thank you! Technically you are right. Some of the boards were verging on quartersawn, although they were purchased as rift sawn.

[@soussef24]

Amazing work!!! You can look up how tillers do miter joints, they smooth out the sharp angles using diamond pads, and contrary to woodworkers they leave a small gap and fill it with an epoxy grout that they smooth out as well. This gives the angles a small round or profile that prevents them from easily shipping or cutting…

[@FortressFineWoodworks]

Very true. That's basically how I did it. Thanks for the input!

[@shewmonohoto]

Sorry for the ineloquence, but... those came out so freaking cool! Subbed.

[@FortressFineWoodworks]

Heck yah! Thanks for the sub!

[@bAdorablePeach]

This thumbnail is much better than the previous one! With the previous one I was not sure whether the image was the start of a clock work project or something else entirely(I had not even considered furniture).

[@FortressFineWoodworks]

Thats so true. I didn't even think of that. So are you talking about the further away shot of the whole piece?

[@Mike-dy8bq]

Very nice work! This build was nerve wrenching just to watch.

[@FortressFineWoodworks]

Thank you. It was nerve provoking for sure!

[@andrewhoward3042]

The way that you create is exactly how I would. Your work is beautiful keep it up buddy

[@FortressFineWoodworks]

Thanks buddy. I appreciate you watching!

[@sprN0VA]

These turned out amazing! While it may have felt odd to paint the wood black, I definitely think it looks much better against the white tile and acrylic than the natural wood.

[@FortressFineWoodworks]

I definitely agree. Thanks!

[@allisonwoods6161]

WOW, what an amazing project and WOW what an amazing outcome. These are truly beautiful 😊

[@FortressFineWoodworks]

Glad you like them! Thanks for watching and taking the time to comment!

[@samesaw]

You sir, are not a hack 👍 you have some of the best attention to detail skills in a pro builder that I have ever seen. I like to think I am in the same category.

[@FortressFineWoodworks]

That's awesome! I bet you know your stuff then!

[@xHarpyx]

Idc what anyone says but that black oak is gorgeous

[@FortressFineWoodworks]

It is pretty cool huh? Thanks!

[@bradleytuckwell4881]

My stress level was through the roof you’ve really outdone yourself an original collection

[@FortressFineWoodworks]

Haha thanks a lot!

[@shaunbailey1033]

Wow…. Just awesome, your attention to detail is something else. Fantastic!

[@FortressFineWoodworks]

That's very kind! Thanks for watching!

[@SupraWoop]

Handles are wonderful, I just love them ! Details are really impressive on this furniture ! Congrats bro, that's a f*cking good job 🙌

[@FortressFineWoodworks]

I appreciate that very much! Thanks for watching!

[@JennyNelson-o2i]

I really like this project 🎉

[@FortressFineWoodworks]

I enjoyed it too. Thanks for watching!

[@bubblesculptor]

That white Gorilla construction adhesive works great with tile on non-standard surfaces, both on wood or acrylic. I tested many different types out, and that held best. PL is good too but that white Gorilla is perfect!

[@FortressFineWoodworks]

I will have to give it a try. Thanks!

[@BlueTurtleStudios]

I enjoyed every minute! Funky build with new materials and new techniques. I need more pearloid! (and cowbell)

[@FortressFineWoodworks]

Don't fear the reaper! Glad you enjoyed it!

[@SpaceShrimp]

I've just stubbled upon your channel, I love your tone, editing and humour. keep up the good job ! :)

[@FortressFineWoodworks]

That's very kind thank you!

[@dimabogdanmihai]

This was nice and quite complicated, I think. Keep up the good work!

[@FortressFineWoodworks]

Complicated at times yes! Thanks for watching!

[@personalaccount342]

my god , those came up awesome, genuinely well done sir.

[@FortressFineWoodworks]

Thank you kindly!

[@JTWoodworks]

It's so cool seeing these come together! Great work

[@FortressFineWoodworks]

I appreciate that!

[@dpmeyer4867]

I felt a great deal of increasing suspense as the video went on....good job

[@FortressFineWoodworks]

That's what the project felt like! Thanks for watching!

[@ChaiWoodWorking]

It's crazy you did two of those. That must have taken a very long time. They look great.

[@FortressFineWoodworks]

Thank you! It was around 200 hours.

[@maxgonzalez672]

New subscriber and definitely not the last video I'm watching you do, and for the work, men you are an artist your dedication to perfection it's beyond anything !!!! Keep up the awesome work and attention to detail !!! You are a genius !!!!

[@FortressFineWoodworks]

Thanks for subscribing! I really appreciate it!

[@PsychoP4t]

I love and salute your attention to detail! Thank you for an excellent video.

[@FortressFineWoodworks]

You're very welcome! Thank you for an awesome comment!

[@kspencer_handcrafted]

Daaaaaaaaang! That was one of the funnest YT videos I’ve ever watched. I was on the edge of my seat biting my nails with you in a few of those steps. 😅 This project definitely deserved your perfectionism, and I couldn’t have imagined the combination of those materials coming out any better.

[@FortressFineWoodworks]

Wow thank you! It was definitely a nail biter and I'm glad it translated through!

[@woodnotestudio]

That is some next level creativity. Awesome work.

[@FortressFineWoodworks]

Next level comment! Thank you!

[@tickfarmwoodworks]

Amazing artistry and craftsmanship. You rock!

[@FortressFineWoodworks]

Thank you so much!

[@conglomeration59]

Wow! Something out of the ordinary with a combination of different skills! Well done and I immediately subscribed.

[@FortressFineWoodworks]

So glad you liked it. Thanks for the sub!

[@gencorp1659]

It's always euphoric to pull something off

[@FortressFineWoodworks]

It sure is!

[@CodyKovash]

Dude!! These are unbelievable! Great job! Wowwwwwwwwwwww

[@FortressFineWoodworks]

Haha thanks dude!

[@kiwigeeknz]

I don’t like this style of furniture, but those are amazing. Great video production quality also.

[@FortressFineWoodworks]

I appreciate you taking the time to say that! Thanks!

[@danferguson3704]

Phenomenal work!! You are amazing!!

[@FortressFineWoodworks]

Thank you kindly Dan!

[@timvaughan3308]

When laying tile on plywood subflooring, it's typical to moisten the ply with some water via a sponge to ensure that the ply it doesn't wick all of the moisture out of the thin-set before it's had sufficient time to cure. Also, it appears the lack of adhesion was exacerbated since the ridges in the thin-set and on the tiles weren't "collapsed" so they weren't fully bonded together. If that makes sense...I think it makes sense? Regardless, these are gorgeous.

[@FortressFineWoodworks]

It makes perfect sense, but I was trying not to add additional moisture to the plywood so it wouldn't expand too much. I honestly think I would've been screwed either way.

[@cazdough6565]

Beautiful product, beautifully made - amazing

[@FortressFineWoodworks]

Thanks so much!

[@billm4560]

What beautiful piece you built Cory! 👍🏻 I know we all have problems but man you had your share with this one! 😞 But it turned out great as all your work does! I love that music too! Thank you for sharing your amazing work! Cheers

[@FortressFineWoodworks]

Thanks so much for sharing your nice positive thoughts!

[@coolabahwoodworking]

This project is insane! I love how it turned out!

[@FortressFineWoodworks]

Pretty unique huh? Thanks Tom!

[@coolabahwoodworking]

@@FortressFineWoodworks it’s really cool man

[@FortressFineWoodworks]

@@coolabahwoodworking I appreciate you dude!

[@KarelKubela]

You did a fantastic job man! Beautiful masterpiece!👍🏻

[@FortressFineWoodworks]

Thanks so much for taking the time to watch and comment!

[@TheTranq]

Very nice work. I love how the mix of materials look

[@FortressFineWoodworks]

I agree. Thank you!

[@blackvenges]

Beautiful table. Great message

[@FortressFineWoodworks]

Yes! Thank you!

[@texaswoodworks8853]

Incredible work and great video. Thanks for sharing.

[@FortressFineWoodworks]

No problem! Thank you!

[@natepeterson7145]

Unique build. Looks great 👍🎉

[@FortressFineWoodworks]

Thanks for taking the time to watch!

[@Sceme1991]

Those turned out pretty nice. Watched the whole thing

[@FortressFineWoodworks]

Thanks for watching all of the way through!

[@BearhawkStudio]

Beautiful work Cory! These turned out amazing.

[@FortressFineWoodworks]

Thanks Dustin! It's been nice watching your projects take shape too!

[@gf8958-p7p]

It true that sawing off the long screws was beautiful. ❤

[@FortressFineWoodworks]

Thank you! I thought so too!

[@tjerkheringa937]

That is impressive work. A daring project! I hope your client loves the result. As a European, I would have a hard time trying to sell a faux MOP effect and faux marble to clients. You are a lucky man :). Funny how cultural differences work. In Europe this wouldn't be considered the opposite of 'fancy'. I love the brass handles!

[@FortressFineWoodworks]

That's so true. Cultural differences define this piece differently in different areas.

[@PEAKCENTURY]

Superb. Love the woodworking, but design and multiple materials is right up my street. Congrats!

[@FortressFineWoodworks]

Thank you very much!

[@jmfreedome9863]

Absolutely Stunning!

[@FortressFineWoodworks]

I appreciate you watching!

[@SmallProjectCentral]

Dude, your best video yet! Well done!!!

[@FortressFineWoodworks]

Thanks! It was a lot of work but so worth it!

[@philliparudolph9595]

for future reference you might want to use a fret saw for thicker brass in the future.

[@FortressFineWoodworks]

I'll have to check that out. Thanks!

[@zelbautista7363]

Amazing project sir, love it

[@FortressFineWoodworks]

Many thanks!

[@LeonWiddicombe]

Just wow... they look awesome... great long form content too... new Sub!

[@FortressFineWoodworks]

Glad you like the long length of the video!

[@stlwoodworking]

Absolutely Beautiful brother!

[@FortressFineWoodworks]

Thank you kindly Greg!

[@creatureofhabit6741]

Man, you should sell those bags from your dust collection. I think it would be awesome to mix with soil for gardening. It'll help hold some moisture. Would be nice in drier climates like here. Jonesy NW ARIZONA

[@FortressFineWoodworks]

That's a great idea. I did some research and unfortunately a lot of the products I use are high in formaldehyde and glues. So it wouldn't be very good for the ground.

[@w.davidmcguinn8674]

Excellent, Thank you very much.

[@FortressFineWoodworks]

Thank you very much for watching!

[@lw8882]

Love the bit about degreasing the brass to ensure better adhesion. It's stuff so many people would just not think of, or ignore.

[@FortressFineWoodworks]

Interesting, I guess that is pretty important huh? Thanks for the food for thought!

[@mrnait5169]

Maaaan primer would just hve been such a good idea so it adheres to the wood

[@FortressFineWoodworks]

The drawer faces were primed. And anything that was black was sprayed with a black tinted clear urethane that doesn't need primer

[@tapasinayak3826]

marvelous

[@FortressFineWoodworks]

Thank you!

[@ping170]

Pretty awesome pieces ! Congrats 👍

[@FortressFineWoodworks]

Thanks 👍

[@stephanvogel9454]

at 42:35 you glued the tiles with cirkel dots. my chef always learned me to never close a cirkel because the inner side of the clue cant get air for drying. also you create a vacuum spot that can create a hight diffrence in your work. :) just a tip to think about.

[@FortressFineWoodworks]

That's a great thought! In my years of being a remodeler I pulled down a lot of panels that were glued with circles of construction adhesive and they all held strong, and were fully cured. Likely because the adhesive doesn't rely on air, it relies on moisture. I appreciate the tip!

[@marclevitt8191]

As you noted, no air is necessary for that adhesive. But water may be needed for some. For example, you know concrete wets as it cures. Epoxy does not require air as it cures from the often exothermic reaction between the components. Construction adhesives most likely don’t need air or water, depending on their chemistries, although I suspect some may benefit from slight moisture. If I am not mistaken, CA glue, cyanoacrylate ester, gets catalyzed by water, so it quickly glues one’s fingers together. But I get the OP’s point about closed circles from gaskets, which could cause issues. I wonder if that is one reason mastic or thin-set is applied with notched trowels.

[@FortressFineWoodworks]

Use code FORTRESS40 to get 40% off your Hungryroot order! bit.ly/4cpvCrI

[@chunkytfg]

Not really my style but stunning work!! Congrats

[@FortressFineWoodworks]

It's definitely a certain style huh? Thanks for watching!

[@chunkytfg]

@@FortressFineWoodworks That it is. The level of details you put into your work is inspiring, I can only dream of equalling it. Your video editing style is really nice too.

[@neilwoodbridge8232]

Amazing build

[@FortressFineWoodworks]

Thanks for watching!

[@gator280]

You do some beautiful work

[@FortressFineWoodworks]

Thank you very much!

[@troyqueen9503]

The joy of woodworking is taking home part of the project stuck to your skin.😂😂

[@FortressFineWoodworks]

So true now that you mention it!

[@stevenhunter3454]

Stunning 🌟

[@FortressFineWoodworks]

Thanks so much!

[@marclevitt8191]

Awesome build. Did you consider countertop epoxy to fill the miter on the tile or un-sanded grout? They make incredible products for affixing and filling solid surface materials such as quartz, Dekton, marble, and granite. On another note, I’ve seen Mother of Pearl used in furniture that looked good without the effect you described. I wonder what the secret is for that material. They make beautiful black lacquer pieces in Vietnam with all types of inlays. I wonder if the clear coat afterward makes the difference. What is unbelievable is they do not only flat panels but also urns, vases, and all manner of organic shapes.

[@FortressFineWoodworks]

That is really interesting! Usually the mother of pearl is shown in perfect lighting for pictures.

[@TaylerMade]

i am jealous of you being commissioned to do such a piece. i am now retired but worked only commission pieces for many years. most of it was reproduction pieces, but nothing like that. well done.

[@FortressFineWoodworks]

Yeah I'm glad you said that. I am very grateful for the opportunity. I also hope you enjoyed your awesome builds through the years!

[@mattelias721]

"...nasty, milky, not-pearl looking substance..." I am mentally 13 years old because I snickered at that... and don't even attempt to deny that was not intentional. 10/10 on the subtle joke. So (again) while I don't hold your clients' aesthetic tastes, I hope they know what kind of high-quality stuff you're making for them. Just amazing, and I enjoy watching you test yourself with new materials. I'm doing a reno that will involve tiling, and has forced me to sheath an entire wall with 3/4" oak veneer ply (no 1/2 inch around here). What I've learned is, that 3x construction adhesive is truly some Magic Elf Poop - great open time, you can adjust the placement (with some application of force!), but once set, it is literally forever. It's holding two 4'x4' panels on drywall just fine. NASA likely uses it to glue the heat tiles onto reentry craft. Two thoughts - if you have a superpower, it's your ability to plan ahead and also foresee problems... it's amazing. Second, I appreciate your philosophy of building everything to withstand 100 years of use. Kinda sad you have to get custom made stuff just to have that anymore, but here we are, and I apply the same thought to my work. Next video soon?

[@FortressFineWoodworks]

That Reno sounds like a lot of fun! I hope its for your home! I appreciate you noticing those things. Have a wonderful weekend and tell your kids to CHILL OUT!

[@theofarmmanager267]

Certainly not to my taste - but, so what? I’m not the client and, if we all liked the same, life would be very boring. I’ve been woodworking for over 45 years and still learn from most videos I watch. Sometimes, I learn how not to do things….but here, I learnt several ways to do things. I don’t think I’ll ever cover a cabinet in shiny ceramic tiles but I did recently cover one in textured panels and I used a construction adhesive - with no adverse movement. The sunburst was very well executed and the reversal of some panels a stroke of genius. The use of brass is always a favourite of mine (although, again, that high art deco look is not for me). Some readers might not know this but an excellent, really old, way of getting many hardwoods to turn black “naturally” and cheaply is to soak some wire wool in vinegar. After a day or so, the solution can be painted onto any hardwood which has tannin (most do but oak has it in spades). If you use full strength, the timber goes jet black in front of your eyes. If you want a grey shade of black, then dilute that mixture down with an alkaline. As always, test it out throughly so that you get the shade you want. This method is very cheap, requires no equipment and is very kind to the environment. Any left over solution can be diluted down and disposed of through the normal waste system (at least here in the UK). Just as a bonus, another way to “naturally” tint timbers such as oak is to brush on lye (readily obtainable). This turns the oak a deep, rich brown and, to me. Looks much, much more natural than a chemical stain. It also has the benefit of really making any grain features, such as medullary rays, pop out unbelievably. I gave up on ammonia-fuming years ago because it is such a dangerous, unhealthy process for the smaller workshop and use these much kinder processes. The only chemical stain I would normally use to tint wood is of I want a smoked oak finish as seen in many of the Arts and Crafts pieces here in the UK. For this, the only process I have found to be consistent is, I am afraid, Rubio Monocoat in smoked. That greenish liquid in the can converts to the right shade on the wood. I say that I am sorry to use Rubio really because I think they have changed since the company was bought by private equity. Developments in those horrible cans seem not to be happening and the cost! Am I paying back those private investors all by myself? Anyway, apologies for the long comment. Great video and great insight into the essential mental strengths needed to be a successful maker.

[@FortressFineWoodworks]

Thanks for all your thoughts. It sounds like you have fun with a lot of your projects too and that's the purpose of creating. Great work! Thanks for watching!

[@wolfwind9658]

Worked with Large format tiles for my countertop. If you go directly to wood it needs to be sealed as you learned but also the tile set must be thinly and evenly spread under the whole tile or it isn't properly supported. I don't have any experience using glue on tile.

[@FortressFineWoodworks]

The 3x construction adhesive worked great! But it doesn't provide enough support for a floor!

[@marclevitt8191]

I wonder if you could have used a thinner box, then screwed on cement board, then thin-set, then tile-lots of ways to skin a cat. At the International Surface Expo, I encountered a company selling honeycombed aluminum boards to support cantilevered kitchen island quartz, stone, and granite installations. You can do seemingly impossible load-bearing overhangs that way.

[@metronyc2855]

Beautiful!

[@FortressFineWoodworks]

Thank you!

[@RobCoops]

That does look beautiful, the only thing that I felt you kind of missed is not putting a mitre on the edges surrounding the acrylic, I feel that would have just pushed this from incredible to unbelievable.

[@FortressFineWoodworks]

I actually agree, although since the black edging is painted the miter would've been lost. So I chose to save some time on that detail. I truly appreciate your thoughts!

[@angelowentzler9961]

You're Buffy the Furniture Slayer!

[@FortressFineWoodworks]

That's a throw back! Thanks for watching!

[@Dragnar-yb1rk]

The original inspiration Come from chaudrolux, a french cabinet maker :)

[@FortressFineWoodworks]

That's awesome that you found who it was. Well thanks to Chaudrolux for their inspiration. And thank you for commenting!

[@jorickleferink7065]

21:09 whoa dude watch out! Casually moving your hand this close over the table saw blade!!

[@FortressFineWoodworks]

I agree, I should've used a push block