Nova Slingshot stereo and heat shield installation video

[@jakemisc5554]

Loved the tour!!! helped me configure my setup. Really appreciate your video.

[@stuartfact8361]

Great setup! I have a question about the space above the cubbies.. I want to run a couple flush mount 3/4” round lights from the top and was hoping to not have to remove all the body panels and the bulletspeed roof. Do you have any photos or video of the area right above the cubby ? Is there clearance or a way to get to that area without taking everything apart?

[@TheRoyaleOne1]

What's the name of the spacers u use for rhe kicker subwoofers to work.. contacted ssv work and they have no clue what I am talking about..l

[@cad1995]

How are the subs holding up for you, did you ever get a grill to protect them?

[@willihohm5115]

I have the same exhaust set up, do you get exhaust fumes in the cabin?

[@frehleycomet]

How thick was the insulation and is that insulation on both sides. I looked at one at Lowes and only one side had the silver lining and the other side was the exposed Styrofoam. If that is the case then which side does the silver lining goes towards. Towards the inside of the dash or towards the engine side. Do they sell one with both sides insulated. Thanks

[@vincesiller8361]

It's so cool that you did the subs like that. I was planning to do that exact same thing. Good to know that they don't fit without a spacer. Do you know if it's available from them?

[@kennethng1740]

Nova Slingshot can't you design a sub face plate at opens and closes for the storage bins?

[@TruDesertEnt]

What kind of amp did you use, Do you sell the brackets?

[@novaslingshot6649]

I used a kicker 800.5 marine. The .5 means it has 4 channels plus a separate sub channel. It also has a switch so the sub channel can listen to the rear 2 speakers and get the sub frequency from that if you only have 4 pre amp wires on your head unit and not a sub pre amp.

[@novaslingshot6649]

I actually made the brackets out of aluminum from the hardware store. Just a hacksaw and a drill bit was needed.

[@sstrey174]

Good video