Now My Engine Wont Explode | GRT EIS 4000 Install

I'm going to be honest, installing the ‪@GRTAvionics‬ EIS 4000 was a lot of work. Every sensor, probe, and resistor has to be just right for the system to work properly, and I'm not even going to get started on the wiring. BUT, it's TOTALLY WORTH IT! Not only do I have critical engine information, but It coupled with my iLevel AP from ‪@levilaviation‬. Now I can see Everything on a single screen.
I want to give a HUGE thank you to GRT Avionics, for working with us on this project. Make sure to check them out at grtavionics.com/
► SUPPORT US : bit.ly/3qHGiMu
► AFFILIATES & SPONSORS: bit.ly/3t6kITy
🚀 J3 RED ROCKET PARTS LIST: bit.ly/3RcDgLI
Flying Eyes Optics - bit.ly/43EYlFg
Save 10% with our code "FLYWITHTHEGUYS"
🖤 I fly with my Lightspeed Zulu 3 Headset! Get yours - bit.ly/3aWm10J 🖤
LINKS
---------------------------------------------------
NOW OFFERING GROUND SCHOOL! - bit.ly/33OvqVc
Study on your own! - • Books, Tools, and Mate...
FOLLOW US ELSEWHERE
---------------------------------------------------
Website: flywiththeguys.com
Facebook: / flywiththeguys
Instagram: / flywiththeguys
Purchases made through some links may provide some compensation to Fly With The Guys.
#grtavionics #engineinformationsystem #redrocket
CHAPTERS
---------------------------------------------------
0:00 Intro
0:36 System Parts
1:47 Head Unit Install
2:43 Cylinder Head Temperature
3:48 Oil Temperature Sensor
4:29 Oil and Fuel Pressure
5:10 Outside Air Temperature
6:38 Exhaust Gas Temperature
8:09 Warning Light
8:47 Fuel Flow/Transducer
10:04 AMP Meter
12:15 Pre Wiring and MANUAL
15:24 Wiring
17:13 EIS Startup and Programing
18:45 Engine Startup?
20:07 Outro

[@brianberezowski5352]

Hello from CYQT. 👍🇨🇦👍 Love your videos and your enthusiasm for Aviation. THANK YOU for sharing your experience and stories. 🙏

[@vylaien]

Cant' wait for the Start Up Video. Carl you rocks, you have a tremendous amount of knowledge in aviation & it is a pleasure to watch your vids. Greeting from Paris, France ✌✌

[@turninmonyin2noise978]

Cool install video for the engine monitoring system. The length of the fuel line from the pump to the transducer may be problematic, as the transducer is fixed to the firewall and if the pump is attached to the case on the back of the engine. The engine will move on the motor mounts and if the line is to short with no room to flex you may wind up with an uh oh moment followed by a lot of quiet and the odor of poo in the cockpit

[@flywiththeguys]

It has just enough to flex and move. I know what you're saying though. I questioned it myself. I'll be monitoring it closely in ground testing. I'm doing LOTS of ground testing.

[@Blaircraft.Engines]

exciting stuff... I'd go work on engine now if it wasn't in 44 boxes! lol

[@flysport_tedder]

10:25 love utilitarian 3D prints like this.

[@BrianRhodes9763]

Great video Carl, cheers from Texas.

[@Aerialphotovito]

This is a great install and a very good piece of equipment to have , I have JPI 830 on my bird and love it !

[@flywiththeguys]

JPI makes some nice stuff too! I went with these guys because it connected to my other avionics.

[@Aerialphotovito]

@@flywiththeguys 👍🏻👍🏻

[@paratyshow]

👍✅ Looking great Carl, tks for the video! Your a Red Rock.. Tease Carl 🤣

[@masonsation]

I finally got my hangar on the north side of DVT. Let me know if you ever need any help. I'm always happy to work on a plane.

[@ScottInTheClouds]

Nicely done and a great video too. Do you have the file for the shunt somewhere I could download it? I've been wondering about how to install mine without it flopping around.

[@flywiththeguys]

shoot me an email over on the website. I'll send it over to you.

[@ScottInTheClouds]

@@flywiththeguys Done, thx