EZP2019+ Bios Chip Programmer Unboxing & Driver Installation By:NSC

Hi all :)
If you look for the Original Drivers, here you go:
onedrive.live....
Best Regards
NSC

[@philzvids3577]

Very helpful video, thank you. By default, the software starts in a language (probably Chinese) with some different font, so you need to click on the menu bar and select the correct language.

[@NSC-Modz]

Sure thing...

[@lotusx5242]

your wallpaper is awesome. if you love broken screen so much, i will give you the real one..

[@NSC-Modz]

😂

[@michaelmeux4137]

I picked up one of the ezp and the clip/ lockdown worked good. I also have that other CH but that clip/lockdown is the one that bounces on me. I think it's just luck of the draw this point. Thanks for the video brother excited to start using the ezp

[@NSC-Modz]

You welcome bro.

[@HenryBartlett-b1l]

Very useful. Thanks for posting.

[@NSC-Modz]

@@HenryBartlett-b1l you always welcome bro. ✌️

[@sarcof3459]

Nice control explanation, and I was able to load the drivers thanks.

[@NSC-Modz]

You Alex's welcome

[@PiotrK2022]

@NSC Modz No, it's not. In Windows 8 and 10 the procedure is a bit different, because drivers are not signed by Microsofy, so you have to disable driver signature enforcement. : Otherwise Windows will refuse that driver installation.

[@NSC-Modz]

Thats right, or set compatibility mode Win7

[@nirmalnath6791]

Thankyou so much.love from India

[@NSC-Modz]

You Wellcome :)

[@grindererrofficial3755]

Hi man, great you got your peogrammer :) Im quite sad coz your "socket" (that blue item where chips sits) is bit robbish. Its probly problem of just your piece. That what i have is good and not so "springy". I will give you good advice - clean contacts with isopropyl alkohol with some toothbrush or so, dont disassembly that bloue socket - i did and i had 2 sweaty hours of "fun" to get iten works again properly :D I have not that central plastic line at mine socket which u had broken by transport - you have slightly different part. I hope it will works for you without problems for long years :) I dont think the "speed" of those programmers is important somehow, its just one chip with memory like 256bits or 2MB and if you dont using it as for living its realy not importantm if is your gold black programmer faster, you can use those attachments from new with gold and mix the best of both :)

[@NSC-Modz]

Yeah, that's right

[@OrnatePixels]

Thanks Brother

[@helmuthrendl6560]

Du bist ein Genie. Habe das gleiche Problem uns schon aufgegeben....

[@NSC-Modz]

Nicht aufgeben 😉 Wenn ich helfen kann sag bescheid.

[@bobbyboygaming2157]

Thanks, these drivers worked, the ones on some other forum didnt work at all.

[@NSC-Modz]

You welcome

[@brigestembima4578]

Merci pour la vidéo il ma beaucoup aide

[@NSC-Modz]

You welcome :)

[@jpl317]

Thank you - very helpful video!

[@NSC-Modz]

You welcome

[@ousmanesoumailayaye8618]

Nice you are the best

[@NSC-Modz]

Thank you so much

[@janaksharma-g9v]

you can speak very good english and you are .Auf wiedersehen Bis D ann

[@NSC-Modz]

Thank you so much, you welcome

[@drelaw2002]

Great video dude

[@NSC-Modz]

Thank you so much

[@Chi3ftain]

Thank you for the file sharing mate

[@NSC-Modz]

You welcome

[@Martin-ot7xj]

Hi there , it was perfect . keep it up . thnx

[@NSC-Modz]

Thank you to very much. You always welcome

[@adilzahidan5580]

hello..l have ezp2019+..when i click (test) this message appear(chip detected:93EEPRoM please manually select the corrisponding type burn)..but in the socket i put an SPI flash 25VQ32..there Is no 93eeprom!! what am i wrong??!

[@HomeGymBro]

Please how did you manage to resolve this; it's just the problem I currently have. Thanks.

[@adilzahidan5580]

@@HomeGymBro l tried to put it in the socket correctly (all' EEPROM Pins must make contact..now its recognized..

[@faruqolamilekan9909]

please I have problem with the new EZP 2023 programmer, after insering the chip into SOIC, when I read the bios is says chip empty. Anyone with the solution

[@Twitchyii]

have you tried using this with any 93x series chips? They are SOIC/SOP8, but I'm still not sure if they work with this programmer or the black edition. I know it says right on the outside case 24/25/93, but I've seen the same case and it didn't have the 93 on it.

[@NSC-Modz]

Yeah, should work on both programmers

[@Twitchyii]

@@NSC-Modz Sorta worked. It kept auto detecting my chip as a 24xxx when it's a 93c56. Couldn't get a proper read from the chip even after manually selecting my chip, but somehow it managed to write and verify just fine(I had a dump, so I didn't need to know what was on there).

[@rodrigowilson5885]

Danke für die Info hab ur lang gesucht für die Software. Mfg Walter

[@alexanderamponsah3414]

awesome

[@NSC-Modz]

You very welcome

[@SidneyCritic]

CH552G, so it's different from the CH341a. It doesn't seem to support GD25B64BP1G - I can't find it mentioned -, do you think it will do it?

[@rizaliniocruz2356]

why am I getting flash error at address 0h ?, i already bought new 25q64

[@ElektroTechNL]

The small one is not good running at 5 volts.

[@stefankosztolanyi7618]

I have got new version EZP 2023+. Your guide helped a lot. Driver install OK, but when I started the program it shows mess of letters intead of correct menu. Can you advice.?

[@NSC-Modz]

You need to take a look on the program files for the language text

[@MarkMark-bl5qc]

How can we unlock or unprotect the eeprom using this programmer and is there other software compatible with it

[@moradas1273]

Thank you..Does this ezp2019 programmer support otp eprom

[@wimland391]

Hi m8 will you make video to make a Pomona SOIC8 Clip

[@Martin-ot7xj]

Hi there which model is better EZP2019 OR CH341A BIOS PROGRAMMER?? thankyou

[@NSC-Modz]

I like my CH341A very much :) But the other one is not bad to, the software is better on the other one.

[@Martin-ot7xj]

@@NSC-Modz thankyou for your quick response

[@NSC-Modz]

@@Martin-ot7xj you welcome ;)

[@Martin-ot7xj]

Hi there , if its possible for you , please make a tutorial video about how to program (startup or super io)chip on laptop motherboard . thnx

[@NSC-Modz]

Hi What do you mean do mean by that exactly? I'm not a programmer btw 😀

[@Martin-ot7xj]

@@NSC-Modz on laptop motherboard there is startup or super io chip, if this chip is corrput, laptop will not boot up, but if we reprogram this chip everythings will be fine, it is like bios chip we can program startup chip as well

[@ravidhas2099]

Which programs use SD card pendrive chip recovery use

[@madhakaa]

HIE SIR MAY I ASK IS THERE A DIFFERENCE BEATWEAN EZP2019 AND EZP2019+

[@NSC-Modz]

i think the speed, but for me it feels like normal... USB 2.0 is USB 2.0 :)

[@asambleamecatronica5785]

Thank you for sharing your knowledge buddy. I have a bin file that was read from 93c76 through ezp2019. When i load bin file and try to White it and click verify it's showing: "flash check error address 0h". I cannot write 93c76 eeprom. Have you experiencie issue before? I have tried with different 93c76 eeproms, diferente ezp2019 and diferente computer and still unable to write my bin file :-( have you seen this before?

[@ruqshi]

Did you ever solve this?

[@asambleamecatronica5785]

@@ruqshi yes, ezp2019 cannot write93c76, use ch341 programer

[@asambleamecatronica5785]

pin conigurationis diferent

[@begieelizar7915]

hehehe. good laught. thanks for nice video

[@NSC-Modz]

You welcome

[@fatehfernane1666]

@@NSC-Modz hello, is it suitable with automotive eproms?

[@NSC-Modz]

@@fatehfernane1666 Hello Not tested for now, but with the right adapter i belive yes :)

[@fatehfernane1666]

@@NSC-Modz Thanks, how much voltage does it work with 5 or 3 volts?

[@NSC-Modz]

@@fatehfernane1666 it can work with both

[@choboubengaly1302]

Canal i find it also ?

[@omerdag8355]

1.8v çipleri otomatik tanıyıp voltajı ayarlıyor mu? ve 1.8v adaptör olmadan okuyup yazabiliyor mu? 1.8v çiplerim var. ama 1.8v adaptörüm yok. sorun olur mu? çipe zarar verir mi?

[@omerdag8355]

Does it automatically recognize 1.8v chips and adjust the voltage? and can it read and write without a 1.8v adapter? I have 1.8v chips. but I don't have a 1.8v adapter. Is it okay? Will it damage the chip?

[@googlelimp9834]

hi would you mind giving me a reply id like to ask a questionifpossible??

[@NSC-Modz]

Hi Yes, just go on 😆

[@googlelimp9834]

@@NSC-Modz i bought a new yamaha dashboard but wrong millage, I've never done this before can I change it through this???

[@gersonlausa4196]

There was a problem downloading this files.. please update your link.

[@NSC-Modz]

Try it again please

[@fonestop786]

Hi,is this program can do efi+id unlock for macbook a1466 and a2179 plz.thank you

[@NSC-Modz]

Good question, I'm not so the Apple guy ^^

[@EvilLabsSolutions]

Yes it can. Unsolder the chip, plug it in the adaptor, download the software . Edit it with a hex editor, delete lock part, fill fith FF, save , upload , solder it back. Then option + command + P + R straight after you hit power button. Keep pushing till you hear 2x chimes, after second chime release all buttons and keep holding shift untill it boots, then in disc utility you MUST format the drive and reinstall mac os from a pendrive . If you mess up these steps, you will have to start again . Good luck.

[@1MW07F]

I can't download the file

[@NSC-Modz]

I will take a look on it later.

[@maroniasty5238]

Hi can you give me this driver folder because my driver cd is empty :/

[@NSC-Modz]

Sorry just saw you 6 comment right now. Still need the drivers?

[@paulrichalland]

@@NSC-Modz I'd be interrested in getting the drivers/software

[@NSC-Modz]

@@paulrichalland here you go: 1drv.ms/u/s!ADMBUoPXCLe-iRY

[@LiorTestg]

Hello my friend mr. NSC, I'm sorry for my lack of knowledge but what is the difference between BIOS and Schematic requests? I have a laptop model: ProBook 430 G5 2VP86EA With motherboard model: DA0X8BMB6F0 rev F BIOS chip model: Gigadevice HH1742 25B127DSIG AP15471 3.3v , SOP8 208mil I bought a bios chip for this motherboard model from Ebay, but it is not the same chip model (GigaDevice 25Q128CSIG which is only 3v and I don't know if it safe to replace it with my locked chip that work on 3.3v) and I have no soldering knowledge. If I find and order a USB Programmer model like XGecu T48 [TL866-3G] that support and has software for Win10 that can read and write to the BIOS chip model of my laptop, 1. Is it possible to read and write on the bios chip using a test clip cable while the chip is still soldered to the motherboard without having to solder the chip from the motherboard? because I have no knowledge or experience in soldering. Otherwise, if the USB Programmer can't read and write on the bios chip with the test clip cable, then there is no point for me buying the USB Programmer at all because I will not have any use with it. 2. At the end of the process, Will any information about the laptop's system hardware be lost in the BIOS? For example, like: UUID, ISV Id, System Board ID, SKU Number, Product number, DMI info, clean ME, CT number , VNRAM , EC firmware and more.. What are the consequences of losing this information on the laptop's system hardware in the BIOS? And if so, is there a way to correct and restore this information? how? I have no idea what these concepts are. Just can read on the Internet and have seen videos that such information can be erase and lost. 3. One of the stores on EBAY wrote to me that it would be necessary to replace the i/o microcontroller EC chip as well, claiming that the password is also stored there and that I would have to use a programmer to do it otherwise there will be an error message and flicker on the screen and and the computer will not work. I do not understand anything about it. If you could help me with any information I would really appreciate it. This problem has been going on for over a year on my computer. Thank you very much.

[@NSC-Modz]

Hello I have a video on my channel where i show how to reset the password for most HPs. And yes, some of them have 2 chips where important stuff is saved, but the most important one is the MB = Main Bios On the main bios is also the password saved. The other chip saves other stuff. It's always recommend to take of the chip, but it can work also with a clip. I'll post you a link now with a video where i used the HPUNLOCKER, this tool will just reset the password it self, it will not delete other important stuff: m.kzbin.info/www/bejne/iWPVk3ppmd6Er9E

[@NSC-Modz]

This video could help you to: kzbin.info/www/bejne/gHbGp4mNmMmLoZI

[@NSC-Modz]

You always welcome 😀

[@LiorTestg]

Hello again my friend mr. NSC I'm about to order programmer from AmazonCom: T48 TL866-3G programmer. I saw my bios chip model in the support list. this is the version only with USB Cable because I don't want to go over the amount of 75$ or I will have to pay customs tax. I need your help to find in Amazon a test clip cable with a correct adapter to read and write on the bios chip while the chip is still soldered to the motherboard without having to solder the chip from the motherboard and that fit my HP ProBook bios chip: Gigadevice HH1742 25B127DSIG AP15471 3.3v , SOP8 208mil . To order it together with the programmer. thanks☺

[@NSC-Modz]

You mean this one? www.ebay.de/itm/275525030637?chn=ps&var=576468257880&_trkparms=ispr%3D1&amdata=enc%3A1cf0Jy7M9T_iubojEDAMpmQ22&norover=1&mkevt=1&mkrid=707-134425-41852-0&mkcid=2&mkscid=101&itemid=576468257880_275525030637&targetid=1716911581679&device=m&mktype=pla&googleloc=9041922&poi=&campaignid=17943303986&mkgroupid=140642150118&rlsatarget=pla-1716911581679&abcId=9301060&merchantid=112143330&gclid=CjwKCAiAkfucBhBBEiwAFjbkr4wFKKPE4AGfrMdXM7vkMkXTtJqHKEfCtbRJP1PE2k0ZroIYI1AhkxoCCAUQAvD_BwE

[@fluffybutt38]

Hi nsc , this be used to flash ps3?

[@NSC-Modz]

No...