Рет қаралды 31,266
Welcome to Part 2 of an eight part series discussing Access Control Lists on Cisco IOS Routers. In this video we will be picking apart the syntax to configure Numbered ACLs on Cisco Routers. I'll show you the command, and then we'll talk through each field.
0:00 - Start / Review of Part 1
0:42 - Two sets of Syntax (Named vs Numbered)
1:05 - Syntax for Numbered ACL (Standard and Extended)
1:26 - Command: access-list
1:37 - ID Number
3:28 - Action
4:42 - Protocol
5:37 - Source and/or Destination
5:57 - Specifying IP Address
6:39 - Specifying Ports
8:11 - Summary and Outro
Part 1 - What are Access Lists?
• What Are Access Lists?...
Part 2 - Numbered ACL Syntax
• Numbered ACL Syntax --...
Part 3 - Numbered ACL Configuration Demonstration
• Numbered ACL Configura...
Part 4 - Named ACL Syntax
• Named ACL Syntax -- Ac...
Part 5 - Named ACL Configuration Demonstration
• Named ACL Configuratio...
Part 6 - IPv6 ACLs - Syntax and Demonstration
• IPv6 ACLs - Syntax and...
Part 7 - Applying ACLs to Interfaces
• Applying ACLs to Inter...
Part 8 - Where should you apply ACLs (closer to source or destination?)
• ACL Placement: Closer ...
Entire Series:
www.practicalnetworking.net/s...