Hydrostatic Testing of Pipe in School Burst Chamber on November 21, 2014.
Пікірлер: 65
@NWkush0247 жыл бұрын
that welder really good to line up those pinholes so perfectly lol
@obfuscated30905 жыл бұрын
That had to be large fun setting it up and watching the test. I wonder if I can talk my local welding school into a burst chamber. 8=P
@justingoham16053 жыл бұрын
As Ricky would say I can weld the gap in the o zone if tha payed per diem
@markriegler4302 жыл бұрын
Lol
@jl-dc6dt7 жыл бұрын
hold my beer and hand me my grinder
@greenspiraldragon3 жыл бұрын
2:29 is where the magic happens.
@user-zw1mg9pv4c6 жыл бұрын
What is the cause of it? Is it protozi or is it a single bus 60/10 or is it a welding of non-rot
@bertjones13152 жыл бұрын
That’s Money shoot baby @2:30!. all over the camera!. 😂
@sighpocket57 жыл бұрын
Nice!!!
@MrThenry19887 жыл бұрын
I'd like to see the xray.
@jasonclatt42437 жыл бұрын
so would i,
@jcporosity47647 жыл бұрын
Welds to cold?
@knightrider97256 жыл бұрын
Wow that's dangerous
@jessefoulk8 жыл бұрын
Wow
@mikekirkwood64118 жыл бұрын
I would really like to see how the standard method for calculating failure worked for this test and hence I would need the following:- Diameter- Wall Thickness- Pipe Grade (it says X42-X52 on the pipe?)- Defect Depths- Defect Lengths- Defect Shape (if actual)- Failure PressureWould anyone be able to help?
@markmondragon35397 жыл бұрын
Mike Kirkwood grade of pipe(x52)×2×wall thickness÷pipe diameter=smys(specified minimum yield strength).....
@I.Odnamra Жыл бұрын
Everything reminds me of her
@jsheavy39237 жыл бұрын
it's not just pressure it the flow also. ya arm leg gone
@chrismcdonald65542 жыл бұрын
I wonder what the actual running pipe pressure is on a pipeline
@Izzulsif8 ай бұрын
in Malaysia for water pipe was 16 Bar
@joeschlotthauer8407 жыл бұрын
Well, a pipe is only as good as it's weakest weld.
@jddr.jkindle97087 жыл бұрын
Another GoPro Camera survival test. Survived like a champ.
@ezradearius46176 ай бұрын
bursting pressure 2700 psi right?
@elc2k3857 жыл бұрын
jeez
@bojidarvasilev88547 жыл бұрын
i'm a plumber , and this is nightmare for my
@kf85755 жыл бұрын
Dony worry about it fella, if your a plumber, then your not working with high pressures like this lol
@tempus_fugit73667 жыл бұрын
is this a weld failure or a pipe failure, I cant tell which?
@engrinshaullah34716 жыл бұрын
welding
@jamier67424 жыл бұрын
I was thinking the same thing. It doesn’t seem to be welding because there is leaks coming from all areas..... No one can say for certain unless the person who uploaded it tells us.
@tedsmith6137 Жыл бұрын
It would be more informative if we could know the pressure units being measured.
@rtchad1983 Жыл бұрын
bottom left corner - seam failure looked to be around 2780psi
@josev.servingonzalez55957 жыл бұрын
if it happened to be a live scenario the welder would be fired...after a few x-ray, and ultrasonic tests....
@allisongolsby45897 жыл бұрын
What was the unit of measure for the pressure?
@henryrollins91777 жыл бұрын
Allison Golsby PSI
@salmanulfarizysalmanulfari47805 жыл бұрын
@@henryrollins9177 sir which company
@kim_jong_un_koreawale2 жыл бұрын
KG/CM2....AND PSI....
@denman85677 жыл бұрын
so what did they do to achive this ??? just butt it up and cap it?
@ekimnamdets69466 жыл бұрын
Hahahaa!!! Dude that made my day
@ohshucks71566 жыл бұрын
Makes me thirsty
@akira59525 ай бұрын
the pipe should be longer
@josephastier74215 ай бұрын
Just skip ahead to 2:30.
@yrun9893 жыл бұрын
🇵🇭First X-Ray /micro/MPI√ 🇲🇾Second comusiouning test√ 25 bar to 2000 PSi
@Moondoggy19417 жыл бұрын
Now if that was tested with air the Go Pro would not have survived.
@asmeIX6g3 жыл бұрын
Who tests pressure pipework wity air? 🤔😂😂
@Moondoggy19413 жыл бұрын
@@asmeIX6g Most utilities do, but they are not allowed on the big pipe anymore.
@jessel12172 жыл бұрын
@@asmeIX6g - I do during hydrostatic testing of fire suppression standpipe systems here in New York
@yourguysam60787 жыл бұрын
This happened on my birthday😨
@salmanulfarizysalmanulfari47805 жыл бұрын
Sir which company
@jameskentsalazar49227 жыл бұрын
testing lng Yan ha
@memetsimsek79036 күн бұрын
Bizim fabrikada basinç vermeden gonderiyor😂
@Joshua-re6qu7 жыл бұрын
F+ I went thru apprentice school...OWNED
@alpham7775 жыл бұрын
Gimme my grinder and paint I’ll fix it.
@TheExplosiveGuy3 жыл бұрын
I got some silicone and some black rustoleum, that aughta do it...
@bonekmania17075 жыл бұрын
Berarti pengelasan yang baik belum tentu baik im sory im from surabaya
@pauljensen92956 жыл бұрын
I think that's a fail!
@TheMarcusGomez6 жыл бұрын
2:30 how girls pee
@kocakola35326 жыл бұрын
Lol
@rizwanlal73905 жыл бұрын
No good
@georgewashington9386 жыл бұрын
instead of sitting around filming the pipe they should have done something to fix it