NX 1953 - Tips for New NX Sketcher

[@robertsandven3281]

Great video! You don’t really have to manually add reference with Include, you can just change the “Within Active Sketch Only” selection filter menu to “Within Active Part Only”. Then it will add the lines/arcs you add a relation or dimension to 😌

[@agg42]

Thank you, I was looking for something like what you recommend and the include command. The "selection scope" option to choose between active sketch or active part is in the "Selection" ribbon bar.

[@jayminbarot6648]

🤗🥰😀🙏 Very nice teaching method with good example...!

[@CDescardeci]

Hi ! Excellent Video and Congratulations for your Didactics, perfect speed and rhythm, make us understand very nicely and continuously. I've already subscribed. Thank you !

[@greg_richrd]

Great teaching didactics!! Thank you very much!!

[@mariagerena9551]

Great video

[@Jibs-HappyDesigns-990]

helpful! thanks!

[@lechatvenere]

Hi. You can select geometry without clicking on "include", you just have to switch the filter of selection "within active sketch only" to "within work part only", nothing has change from old sketch for this. However, what is nonsense in this new sketcher, is the fact that NX create lots of constraints that we can't break by only wiggling, this is sh.t sorry. I found so many bugs in this new sketcher, it takes me so many minutes to update 1 part, he lost so many things when you change values in 1st sketch you create giving relations to others.. It's losing also direction for pattern witch is completely nuts. What is also intriguing is the new relation "stars" everywhere, each time you enter the sketch, causing difficult updates. You can destroy them but they come back each tile you enter a sketch. Last point, is the impossibility to update a dimension if you are not into the sketch. On the old version, you didn't need that, and it is a waste of click. Of course you can add relation to every dimensions and you can update the dimension in the 3D, but sometimes you can't, the dimension is blocked for no reason and appears yellow. The only solution is to go into the sketch, convert the dimension in yellow to reference, then convert it into active and only now you can change the value you wanted. It's making me crazy. Sometimes I'm in a 100 parts conceptions and I have thousands of new clicks, minutes/hours of waiting I didn't have before. Did you experience all those situations ? I'm really curious :/

[@cmikey1960]

It kind of sounds like NX is saying Creo is a better software.