NX 8 Advanced Functions - Flaperons, Spoilerons, and Game Mode

Welcome back subscribers, and new views to the RC Plane addict. A place where I can share my passion and addiction for flying RC planes.
In this video I go through how to set up a four channel plane, and the Spektrum NX 8 to use flaperons, spoilerons, and game mode.
Flaperons and spoilerons are great options for slowing down fast four channel planes, especially when landing.
If you have any questions leave a comment and happy flying.
Links:
Spectrum NX 8: www.horizonhob...
RF 9.5: • Review and Flight on R...
Spektrum NX 8 Setup and bind: • Episode #1: Spektrum N...

[@IllFlyIt]

Thinking of modifying my Conscendo Evolution and 850mm Pitts S1S this way. Very helpful, thanks for making this video!

[@RCPlaneAddict]

Not a problem. Let me know if you have any other ideas or would like to see some different content. Cheers

[@rafaeltorres2886]

Thank You so much!!!!! your my goto guy for tutorial on the NX8 😊😊😊😊

[@RCPlaneAddict]

My pleasure brother!

[@ohioace58]

Can I assign SAFE to Aux 1 so it works properly when I split the ailerons to two channels when adding Flaperons? I only have one aileron working when in SAFE mode and checking for corrections.

[@RCPlaneAddict]

I do not believe that safe will work with the ailerons split into separate channels, at least that is the talk around the club.

[@RCPlaneAddict]

It looks like if you have forward programming you should be able to with channel assign, but if you go the plane as a BNF, with a preprogrammed RX no.

[@ryanshoesmith750]

When I set it up, it makes the right aileron -56 and the right 56

[@ryanshoesmith750]

Basically turning the plane

[@RCPlaneAddict]

That’s strange. Sorry, I’m not sure why that would be happening

[@mikercflyer7383]

With your set up is the throttle normally on the left stick?

[@RCPlaneAddict]

Yes, throttle and rudder on the left.

[@mikercflyer7383]

@@RCPlaneAddict I will be flying an electric glider and I will use the left stick for spoiler how do I use a switch for motor. Using an NX8

[@RCPlaneAddict]

Mike, are you talking about throttle cut. Just go into your menu, find the throttle cut, and program it to the switch you would like. Easy peezy.

[@TyK622]

Well done videos RC PA ..... I learned a lot from your vids and about to take the leap and buy a NX 8. Before I do, what I would like to know is .... does the NX8 have the Hangar 9 Meridian 10cc in it's model memory? I'm about to purchase both. Cheers for any assistance.

[@RCPlaneAddict]

Great question. Honestly I am not sure, as I do not use the presets in the memory. Personally, I like being able to set everything up myself so that I have things dialed in to my liking. In any case, I did not see that model in the presets.

[@TyK622]

@@RCPlaneAddict .... thanks for your response. I guess I will have to setup the model to my liking then. Cheers.

[@w.j.bendellr.c.flying.1037]

“Your Good”. ⭐️⭐️⭐️⭐️⭐️

[@RCPlaneAddict]

I try to share what I got. Let me know if you have any suggestions.