NX CAM - Create Postprocessor (Hyundai Wia SKT100/160, fanuc0i controller) #2

For Teaching or Learning Create PostProcessor.
File Download
1. Modeling - drive.google.c...
2. CAM File -drive.google.c...
3. PostProcessor - drive.google.c...
4. TCL File (program_name) - drive.google.c...
Welcome Any comments
Thank you for Watching! :)
Output As follows. (2019.12.14)
------------------------------------------------------------------------------------------------------
O1214;

G28 U0. W0.;
(T1 - OD_80_L);
(Operation - FACING);
T100 M8;
G50 S1800;
G96 S150 M3;
G0 X66. Z3. T101;
X65.2 Z1.8;
G3 X62. Z.2 R1.6 F0.25;
G1 X-1.6;
G3 X-4.8 Z1.8 R1.6;
G0 X66. Z3.;
X60. Z1.36;
Z1.;
G1 Z.2;
Z-27.9;
X62.;
G0 X63.132 Z-27.334;
Z1.;
X58.;
G1 Z.2;
Z-1.569;
X59.4 Z-2.269;
Z-27.9;
X60.;
G0 X61.132 Z-27.334;
Z1.;
X56.;
G1 Z.2;
Z-.569;
X58. Z-1.569;
G0 X59.132 Z-1.003;
Z.766;
X55.594;
G1 X54.462 Z.2;
X56. Z-.569;
G0 X57.132 Z-.003;
X66. Z3.;
G0 X150. Z150.;
T100;
(T3 - OD_55_L);
(Operation - FACING_1);
T300;
G50 S2000;
G96 S200 M3;
G0 X66. Z2. T303;
.......

[@antonaveendp2896]

Always best sir

[@nxcadcampostbuildertutoria4058]

anto naveen dp thanks always!

[@laxmannxyadav6777]

Fanuc canned programming according post processer make is proram G01 ke according bn gaya sir