Рет қаралды 11,389
In this NX CAM tutorial video we're going to show how to set up your blank geometry so that your IPW will look at your OP1 set up file. We are going to set up our OP1 blank just as we would normally using part stock geometry. In this case it is a component. The key difference will be to set up your IPW position from positioning type as from part two CSYS. This will allow an anchoring point for your IPW and following operations. In this case I'm going to use the CSYS that is located within my workpiece component. This will ensure that my reference CSYS will be the same between operations.
For more NX CAM resources, please visit appliedcax.com...