Any update on Structural Designer in NX 1953 series?
@GMSystem20013 жыл бұрын
There are updates in 4 areas: 1) New options that you can use to refine the length and position of a structural member on a frame regards to its construction curve. Modification with 4 values: Start, End, X Offset, Y Offset 2) Enhancements of Structure Designer stock library: Aluminium profiles: Square, rectangular and round tubes and new collection of cross sections for aluminium T-slots in configurations with 2 to 12 slots. 3) New Grab Tab command to add a feature that allows a crane or some other machinery to lift and position the structural frame into place. 4) The Structure Designer application is now integrated with the Structure Welding application, so you can use the Welding Joint and Fabrication PMI commands with Structure Designer objects.
@mahmoud-saeed3 жыл бұрын
Quantity is 1 for all members in part list ! why it didn't group identical members ? and how to do that ?
@GMSystem20013 жыл бұрын
Currently, every member exists as an individual part file with a unique name, and that’s the reason why each member has seperate row in list. The best solution I can find to define grouped parts list is set the length column as a key field. The downside is that members of the same length but with a different cross section could be grouped together, and to prevent it add additional column ‘Section type’ and set it as key field too.
@mahmoud-saeed3 жыл бұрын
@@GMSystem2001 But this will group members with different cut angle or any other feature like holes as one item in the list
@GMSystem20013 жыл бұрын
After add feature like hole, chamfer etc, the part name of member changes by default, for example from Structure_00_Member_Square Tube_01 to Member_01. Additionally, to distinguish between the different cutting angles of the frame components, additional columns can be included: SD EndxCutAnglex. Structure Designer is a new environment and Siemens is making its development a priority. All submitted comments are likely to be included in future NX editions. I have already reported this issue to Siemens. For any further comments, the best way to contact Siemens is support.sw.siemens.com and official NX community community.sw.siemens.com/s/topic/0TO4O000000Mj0JWAS/nx, where the product managers are present
@mahmoud-saeed3 жыл бұрын
@@GMSystem2001 Thank you
@krzysztofmichalik2364 жыл бұрын
Czy da się w jednej kolumnie posiadać rozmiar profilu oraz jego długość? Np. RK50x50x4 L=670
@GMSystem20014 жыл бұрын
Tak, należy w tym celu odpowiednio zbudować składnię pobierającą do komórek te dane. W tym przypadku będzie to ' L='
@krzysztofmichalik2364 жыл бұрын
@@GMSystem2001 A czy możliwe jest, by niektóre linie z tabliczki rysunkowej w NX były cienkie a wybrane grube?
@GMSystem20014 жыл бұрын
@@krzysztofmichalik236Tak - można to skonfigurować, wybierając komórki i klikając na niej/nich PPM -> Ustawienia -> Wspólna -> Komórka -> Granica