Рет қаралды 1,054
This tutorial takes Windows as an example. If you use a MAC system, the operation process is similar.You can use candle for the first test. After the test is successful, you can change it to other control software you want to use.
Connect and test the machine
Step1. Turn on the power of the electric control box.
Step2. Use the USB cable we provide to connect the electrical control box and the computer.
Step3. Check whether the driver is successfully installed in the computer management
Step4.Open the Candle software
Step5. Check the software status. If IDLE is displayed, the machine and computer are successfully connected.
Step6. If the button is still gray, enter the software settings.refresh the port, and check again whether the software displays IDLE.
Step7. Press the JOG operation button and check whether the movement direction of each axis of the machine is correct
Step8. Back to origin test
NymoLabs NBS-6040 CNC
Buy from Amazon:
amzn.to/48qnUvN
Buy from Official website:
bit.ly/NBS-6040
NymoLabs NBX-5040 CNC
Buy from Amazon:
amzn.to/3vFiVc5
Buy from Official website:
bit.ly/48Bxfkl
NymoLabs 4th Axis:
Buy from Amazon:
bit.ly/3OfNQBX
Buy from Official website:
bit.ly/3SU6LUm
710W CNC Router Spindle:
Buy from Amazon:
bit.ly/3u4GWJ3
Buy from Official website:
bit.ly/48K0XUp
CNC Dust Shoe:
Buy from Amazon:
amzn.to/3u3FtCS
Buy from Official website:
bit.ly/4987qYP
MPG:
Buy from Amazon:
bit.ly/499IkZX
Buy from Official website:
bit.ly/48KZGMC
10W Laser:
Buy from Amazon:
bit.ly/49Gyq1S
Buy from Official website:
bit.ly/3wtrhUq