How to install ECHOGEAR Full Motion Articulating TV Wall Mount Bracket

[@EvangelosG]

As someone who hasn't had a dad since I was a kid, these videos are more helpful than you think, in more ways than just the setup. Thank you.

[@DIYRAY]

Thanks for the feedback and please remember to subscribe to the channel and like the video.

[@scottgerbozy3079]

GREAT VIDEO TUTORIAL! I just bought one and your instructions were awesome! Thank you very much for taking the time to produce this video! You really made it look possible!

[@DIYRAY]

Thanks for the feedback and please remember to subscribe and like the video.

[@johnhartmann8158]

Thanks

[@DIYRAY]

Wow, thank you .

[@nocturnal1551]

Is there anyway to adjust the level of the TV after it’s been mounted? (Like a level option). I mounted my tv and it’s slightly leaning downward on the right side of the TV. Anyway to make slight adjustments without having to remount the mount? Thank you!

[@DIYRAY]

Maybe, I guess it depends on how much adjustment you needed.

[@leonardrndll2]

Hey Ray, I just want to say that your video was very informative and you’ve gained a new subscriber. You’re an example of what I think men should strive to be like! Kind, helpful, and self reliant. Keep up the great work and you’re going to live the life most men wish they had but won’t put in the work to achieve.

[@DIYRAY]

Thank you for your comments. It’s greatly appreciated.

[@brookebagdonas1157]

You fast forwarded through all the stuff I came here to watch/learn...

[@DIYRAY]

Thanks for the feedback.

[@bulkypug2574]

I secured my mount with staples and duct tape saving myself a lot of time.

[@DIYRAY]

Bulky Pug okay, just stop it. Your tv cannot been mounted with staples and duct tape. But it would been a nice Blooper video for a good laugh 😂

[@zenci21]

Hi, planning to install with same mount my 77C1 above a console..however not quite sure the height that I should install the 77”TV…console height is 31.5”…please appreciate your help.

[@DIYRAY]

Thanks for the feedback and please remember to subscribe to the channel and like the video. To answer your question, You should make a template of your TV. Make sure you mark the location of the mounting point on the template. Use to get a Visual reference point on the how the TV will sit on your wall. When you are happy with the location just use a punch hole to mark where the mount points on your template are located. That should help in getting your mount install. I hope that helps. Good luck.

[@Anabee399]

Thank you, Mr. Ray, for your concise and much-needed tutorials. God bless.

[@DIYRAY]

Thanks for the feedback and please remember to subscribe to the channel and like the video.

[@Anabee399]

@@DIYRAY Done!

[@DreDay2000]

How’s the mount holding up? Any issues or tips? Just picked one up

[@DIYRAY]

Thanks for the question. Absolutely no issues. Just make sure you go into a concrete wall or stud. I’m very solid Wall mount. Please remember to subscribe and like the video.

[@zulusound]

How did you figure out the height to mount it on the wall?

[@DIYRAY]

Thank for the question. I used the mounting points on back of the TV i was mounting along with the dimensions of the TV itself. You need to figure out a comfortable viewing position of the TV and go from there. They should give you a good estimate on how high you should install your mount.

[@funsaah]

I thought the standard for studs are 16” to the other stud but this frame is 26”, so how do I work that math. Thanks

[@DIYRAY]

You need to add support frame. Thanks for the feedback and please remember to subscribe to the channel and like the video.

[@Zeroplanetz]

I would like to know how easily it slides like the big Sanus you see on display at bestbuy. How does it compare?

[@DIYRAY]

Zeroplanetz I can’t answer that question. I just can said that this bracket is well made and sturdy to holds my big screen TV.

[@Zeroplanetz]

Ray Ray Ray but your mount, does it glide smoothly or does it jitter when moving it? Can you move it with 1 or two fingers or is it tight and hard to move it?

[@DIYRAY]

Zeroplanetz I’m able to articulated it in any Directions that I may need it.

[@Zeroplanetz]

Ray Ray Ray well I would hope so being a Full Motion. But you haven’t said anything about how smoothly it operates. Or if it sticks or what. I will just look into a different one. Thank you for your time.

[@DIYRAY]

Zeroplanetz you make a good point. It’ very smooth in using it. I will do a followi up video

[@kingofkingz235]

Good video, it would've been nice to know witch screw you used for the bracket for back of the TV to save us some time. 🙂

[@DIYRAY]

I used the ones Bites into drywall and wood. Thanks for the feedback and please remember to subscribe to the channel and like the video

[@k.Newbbie]

Great job, now I'm worried the door will hit the tv when out 😫

[@DIYRAY]

Thanks for the feedback and please remember to subscribe to the channel and like the video. I have a door stop installed to prevent it.

[@ahmxtb]

6:33 this is the most watched part of the video and it’s the part you skipped over 😅

[@DIYRAY]

I just screwed. The support brackets behind the TV wasn’t worth extending video time on that simple procedure.

[@RBold2]

I bought this mount and it is heavy

[@VOLOREAN]

Thank you

[@DIYRAY]

Thanks for the feedback and please remember to subscribe and like the video.

[@originblueorion]

Great instructional video, btw!

[@DIYRAY]

Blue Orion thanks for the feedback and please remember to subscribe to the channel

[@8CIC8]

Thanks!

[@DIYRAY]

Thanks for the feedback and please remember to subscribe to the channel and like the video.

[@169Aquarius]

Not one time you explain how you put it up you just fast forward to the view no Play by play or mothing

[@davidvdg2850]

Ray. Great info but you take way too long to get to the point. A lot of redundancy

[@davidvdg2850]

Also... it didn’t show mating the tv to the wall mount!

[@DIYRAY]

Yea, but I like to be thorough. Thanks for the feedback and please remember to like the video and subscribe.

[@Craig5150EVH]

Come on man !!!! 9 mins and 22 seconds until you actually start the installation? You gotta do better and cut down the yapping! Hahahahhaah

[@DIYRAY]

Craig Van Tichelt thanks for the feedback and please remember to subscribe to the channel

[@theghost4729]

Seriously....😴😴😴😴

[@h3ll0_2]

There was more measuring than actual drilling.

[@DIYRAY]

Of course, I like to make sure that I’m right in my measurements. Thanks for the feedback and please remember to subscribe to the channel and like the video

[@h3ll0_2]

@@DIYRAY what drill bit did you use to drill the holes before drilling in the screws?

[@rickywanless2239]

Never seen anyone struggle so much to open a box 🤣

[@DIYRAY]

Thanks for the feedback and please remember to subscribe to the channel and like the video

[@wabberjacky9951]

Clean as fuck , nice job

[@DIYRAY]

Thanks for the feedback and please remember to subscribe to the channel and like the video

[@itech1129]

I wonder if hes a Amazon affiliate 🤣🤣

[@DIYRAY]

Geo Yes I do. I started it in the video and it’s listed below in the detail section. Thanks for the feedback and please remember to the channel and like.

[@patfish3291]

Hahahaha what are you doing here?

[@DIYRAY]

The same reason you looking for. Free information. Thanks for the feedback and please remember to subscribe and like the video.

[@mnight207]

Good vid. Hey, I sent you an email...its from khakichrome....check it out

[@DIYRAY]

Thank for the feedback. I got the Em. Thanks for the tips. Yea, trying to improve. making content isn't e-z but i'm committed in getting better.

[@mnight207]

Studio Rays No doubt. Check out Real Tool Reviews channel. He sets it up and discusses it very nicely

[@DIYRAY]

Yeah, I already subscribe to the channel. I will watch and take some point. Thanks again