O4 Air Unit Park flying in Crux35

Uncut, just getting used to the weight and feel. Looks pretty good in my eyeballs while flying. Was pretty nervous overall on this one. Crashed the last two times I flew this frame.
O4 Air unit(lite), Crux35 v2(was analog), 5/9v bec, mounts edited(not well enough) to use 3 holes, only using 2 currently. Wired the O4 to the open uart1 connection.
Newest mount- meh, try it please give feedback. As someone who is newer, it can be invaluable.
www.thingivers...
In betaflight I then had to activate the uart1 as an MSP and set peripherals to MSP+display port. To get the osd working right, I had set it to HD and ran a cli command "set osd_device_displayport_device = msp".

[@MiDZi024]

Hi, i just gonna do the same build with o4 and crux35. Can you tell me where you wired the bec and witch one you choose the 6 or 9v ?

[@RuToClose]

Matek Micro BEC 6-30V to 5V/9V. Wire directly on board to bat + and bat - accordingly.

[@RuToClose]

Just to clarify my almost unhelpful comment. I soldered the bec's 9v pads to make it 9v. Because the 5v is also 1.5a, peaks at 2.5a. Which may lead to brownouts. So I just went 9v 1.5a with the 2.5a peak because that is more power. Flight times increased from having a thumbro w taking power on top of the analog system.

[@MiDZi024]

@@RuToClose that sound nice 😎, i gonna do the same with BEC 9v/1.5A from battery to dji o4 .Thank you for reply 👌