Best tortilla press video i have seen , nice build
@kathrynnewton8721 Жыл бұрын
An exquisite build! Superb workmanship! I wish I had the time and tools to build it for my friends 70th on Saturday. As I have not I’ll have to do something more basic - but another day, Yes! Thank you!
@johnfrazier93276 жыл бұрын
Hey @WoodPlusMore thanks for the vid. I just built one of these and gave it for Christmas present to my friend's family. He is a great BBQ smoker of meats and I talked him into doing pork butts (for Carnitas tacos) then had them open tortilla press present while the pork was resting. I also bought some Masa Harina from the local Mexican market so we could make our own corn tortillas. Everything came out killer and worked awesome. Thanks a bunch for the video, again!! Things I did different. -Base wood: Alder -Top woods: Maple and Padauk -Handle and pivot block: Jatoba -Dowels: Cherry and Walnut -Finish: Shellac -Tortilla thickness (hinge set height): ~.700" I actually made 2 of them so I have one too! :) To the person asking about cost. Lumber can be expensive here in California and Oak and Walnut would be a little cheaper. I'd say a little over $100 when all was said and done in materials because you have to purchase minimum lengths of boards, etc. What to do differently, build notes? Don't use Padauk next to a white wood like Maple. It is a neat bright orange/red and tends to bleed and even chasing the sawdust in fine grooves can be challenging. Padauk with Walnut would likely look awesome with less headache. The Jatoba for handle and pivot are great case they look beautiful and are super dense/hard. For setting hinges for thickness, I used 3 pieces of cardstock that measured out .700" which is exactly what the 2 corn tortillas I measured with calipers from my fridge :)
@johnfrazier93276 жыл бұрын
Typo correction .0700" thickness. Otherwise those would be some chunky tortillas :)
@javilarg5 жыл бұрын
No doubt, perfect play-doh tortillas with an art decó style tortilla press 👍🏻
@rgriff0007 жыл бұрын
that looks amazing. I just watched about 10 videos on making a tortilla press and yours is by far the best. I can't wait to make one
@woodplusmore35447 жыл бұрын
Thanks so much Ryan, really glad you enjoyed it! Good luck on making your tortilla press, be sure to let me know how it goes!
@Pherramoo4 жыл бұрын
Beautiful work!! Your craftsmanship is top notch.
@reelyology4 жыл бұрын
Thanks so much on the tips, I learned a lot from your video especially on the spacing between the two planes when setting the hinges
@kirkwasson753110 ай бұрын
Great build. Thanks for sharing.
@jameshowlet55974 жыл бұрын
Sir, I just want to tell you that as a Mexican guy who loves tortillas and carpentry just the same... this is the BEST and MOST beautiful tortilla press I've seen in my life!!! Thank you very much for sharing your knowledge!!! Enjoy your tortillas!!! =D
@johowohoj3 жыл бұрын
Very well done!!! And I better get started as I have quite a few to make!!!
@frankpichardo52995 жыл бұрын
Nicest tortilla press so far!
@HAIRY_SOAP Жыл бұрын
beautiful work mate!
@robreyescosme69024 жыл бұрын
I made this based on your design, using mahogany, walnut and maple.. it came out very nice..
@humbertogarcia73174 жыл бұрын
Absolutely gorgeous!
@elizabethcarmenlopezmoya35736 жыл бұрын
Que hermoso si trabajo señor, le quedó perfecto.
@eogg257 жыл бұрын
Would working is the best Hobby. your press is very nice looking.
@woodplusmore35447 жыл бұрын
I really enjoy it as well! Thank you very much, I appreciate it!
@79MrZeus5 жыл бұрын
Very fancy for a tortilladora machine! Cool
@slohmann44093 жыл бұрын
Now I have to see if I can get my hubby to make me one just like this one! It’s exactly what I was looking for! Can you please list the measurements & other cuts in detail. thank you
@DiannaAtherton5 жыл бұрын
That turned out amazing. I was watching another video where the flour tortillas turned out around 8 inches across easily. The press looked a lot like yours. You did it right. Have you ever seen one that's looks like yours for sale? The secret is in the handle design to get that great down pressure. Cheers
@67ASICS4 жыл бұрын
Simply beautiful!
@cocodig5315 жыл бұрын
in Mexico that tortilla machine is made hundreds of years ago and you can find it for sale anywhere and in many materials, wood aluminum, iron, plastic, etc ... they see it as a novelty but that here in Mexico is very old and anyone can make it
@scalpelo926 жыл бұрын
You are an artist!
@woody9876544 жыл бұрын
Looks amazing! What are the stock thicknesses? To me it looks like the widths and thicknesses of the various pieces are 1-1/2" and 3/4" respectively, based on the fact you stated in the link to the step by step instructions that the bottom is 10" x 10" and the top has 13 pieces glued together, it stands to reason the top is made up of 13 3/4" pieces to make the top 10" across and the other various pieces seem to fit that same criteria by studying the pictures. If that is the case, the only other question I have is what is the total width of the handle when you glued it together before shaping the handle? Thanks so much for sharing this video!
@fabianwildemer364 жыл бұрын
El mejor video de tortillero!!!
@hans-elhaus1007 жыл бұрын
I didn't know a Jedi master could do a tortilla press!
@wilfredodiaz8558 Жыл бұрын
BEAUTIFUL ❤
@anemul266 Жыл бұрын
I want to make my own press. I see all these presses using wax paper to press the tortillas. Can it be used without wax paper?
@josevelazquez8885 жыл бұрын
Exelente trabajo maestro. I really like it
@Jamessferrier3 жыл бұрын
Nice work. I like how you embedded the fulcrum shaft and hid it under the dowel plugs. Are your tortilla presses for sale? If so, how can I order one?
@TheEffoff6 жыл бұрын
Your belt sander rig and your glue cup stand are pretty darned spiffy, too. Will the glue come out of the silicone brush?
@apAvocado5 жыл бұрын
You are one awesome, sweet and caring husband! I assume you made this for your wife. Very beautiful gift! I wish you sold these. I would buy one just like the one you made. You don't happen to be Central Coast Woodworks on Amazon?? Please let us know.
@brianzachary56184 жыл бұрын
I like the belt sander jig.
@valarieknight79905 жыл бұрын
Can you share what size drill bits you used, size dowels you used, bracket size, for those of us who are not carpenters but would like to try this? And if you could explain more about the construction paper works and how you use it. Thanks!
@VictorRodriguez-rd5xl5 жыл бұрын
Great tortillera my friend, nice......
@paultinajero97333 жыл бұрын
Nice job, it's 1 1/2 inches wood?
@mercedesfraireperez49694 жыл бұрын
Bellísima!
@josevera74784 жыл бұрын
Una belleza!!!
@reubenonrye12 жыл бұрын
I love your design. Can you post plans for this press? Thanks.
@iz_pervocvet4 жыл бұрын
Thank you very much. It's so nice lesson
@fiberinspector13047 жыл бұрын
Great build!!
@woodplusmore35447 жыл бұрын
Thank you very much, and thanks for watching!
@mariaelenagonzalez19072 жыл бұрын
Muy bonita. 😍
@abeedcactus37494 жыл бұрын
Very beautiful
@martamellado46755 жыл бұрын
Se ve hermosa esa prensa 🤗
@maydechavez21644 жыл бұрын
Great job, it looks awesome 😍 do you sell them?
@clasicradiolover5 жыл бұрын
I've always seen these made of metal. Today I visited a Mexican household with a wooden one.
@gilbertrobles13745 жыл бұрын
Excellent!!!!! Just subscribed👍👍👍👍👍
@jambar02013 жыл бұрын
Hi You have done a great job well done Do you sell the press let me know please tks
@pattriciapatino6 жыл бұрын
Excellent
@josephc86316 жыл бұрын
Excellent wood work
@alsok26 жыл бұрын
Make me one for my birthday and I’ll provide a lifetime supply of homemade tortillas. But seriously...are you selling these yet? It’s clear that many are interested (including me) plus besides, I don’t own all of the equipment that would produce this lovely and useful item.
@coralillomx18674 жыл бұрын
país. Diseño esta perfecta.
@TREBTHEGHOSTMAN7 жыл бұрын
I just love your tortilla press do u sell them?
@woodplusmore35447 жыл бұрын
Thank you very much, means a lot! And I don't sell them right now sorry!
@-greenyaxoboom15.5 жыл бұрын
Do you sell them now? I just got one and it’s not leveled! That’s the struggle when shopping for one.
@aboobackerpalamadathilkozh28095 жыл бұрын
Very good I mackit already one
@mariarocha14664 жыл бұрын
Perfecta Cuanto cuesta esa prensa para hacer las tortillas ycomo la consigo?
@zakorkaz7 жыл бұрын
What was the total cost in supplies to make this? I'm new to woodworking.
@abstractcreations2465 жыл бұрын
Hi there! Do you sell those? If so I'm interested
@RedfishInc3 жыл бұрын
I was enjoying this build very much until the snow started and I stroked out.
@yanetgarcianaranjo73504 жыл бұрын
Precioso
@philochristos3 жыл бұрын
I didn't know they were supposed to be that pretty.
@joshcraig64756 жыл бұрын
Do you have a cut list or plan for this
@Rated99R6 жыл бұрын
What size tortilla does it make? Do you sell them?
@cadetmouse5 жыл бұрын
THATS THE bIZNESS MAN!!!!
@Joner884 жыл бұрын
What are dimensions on the wood
@sergioguteretz59313 жыл бұрын
wow ..... !!!
@embajadortexano89284 жыл бұрын
Porfavor Algun Numero de Telefono para llamar para hacer un pedido de prensas para hacer Tortillas.?
@Shelby-482 жыл бұрын
Magnifique 🤩🤩🤩 J en veux une 😀 Je peux passer commande ou ? 😅😅😅
@claulovek4 жыл бұрын
and I wonder if it works? they look beautiful but there are some that do not work
@BettyBoop54134 жыл бұрын
Can you make one to sell? I would love to buy it from you.
@juanvazquez63464 жыл бұрын
Eres un chigonazo carpintero
@margaritagonzalez17997 жыл бұрын
Just perfect! Awesome job if you ever decide to sell please let me know
@woodplusmore35447 жыл бұрын
Thank you very much! I will be sure to let you know if I ever do decide to sell them!
@JoeLyddonWWR7 жыл бұрын
Really LIKE that Music! :) :D
@woodplusmore35447 жыл бұрын
:D Awesome! Can't go wrong with some jazzy Christmas jingles. Thanks for watching!
@manueleh15 жыл бұрын
How wide are the strips?
@paulocesarseverosoares7675 жыл бұрын
👏👏👏👏 Belo trabalho !!
@sumaijapookundil3205 жыл бұрын
Good
@pumpkinheadghoul5 жыл бұрын
You know, my birthday is just a month away : )
@keerthe17 жыл бұрын
is this avaialble for sale?
@woodplusmore35447 жыл бұрын
Hey sorry for the late reply! I actually hadn't thought about selling these, so for now it isn't.
@rafaqtsawati2805 жыл бұрын
Virey nice
@DelfinaYoung5 жыл бұрын
I love your work, would you make one for me Sr.? I will send you money for it. I will need one 11.5 because I like big tortillas, I like it like that or just walnut wood. Thank you!!!
@sorenpatrock31855 жыл бұрын
👍👍👏👏
@ColeAviation7 жыл бұрын
Great job! 😃👍🏼
@woodplusmore35447 жыл бұрын
Thanks a lot Chad, appreciate it!
@sergiosalazar83184 жыл бұрын
Que Boeing.
@rigocarranza35886 жыл бұрын
nice
@tonpraddo71444 жыл бұрын
what measures can you send me ???
@michelsarrazin75984 жыл бұрын
Bien dommage qu'il n'y as pas la dimension,je vais faire au pif 23 c par 23 c
@luizcarlos-xr8cw6 жыл бұрын
Como faço para comprar a tábua de abrir tortilha?
@frankvergeretti28924 жыл бұрын
Nice ,but I don't ont have all those tools.
@RAMIREZ1625 жыл бұрын
What's the measurement
@juanagarcia99134 жыл бұрын
Quiero una por favor.
@craigandg5 жыл бұрын
Selling these yet?
@nasreenkhan92334 жыл бұрын
That's copied from our Indian roti maker but good job 👍👍
@paolocalifano6247 жыл бұрын
Bellissimo oggetto da esposizione voto 10 per un uso pratico la costruzione è troppo complicata voto 4
@woodplusmore35447 жыл бұрын
Grazie per il commento!
@megamentemegamente41326 жыл бұрын
En México usata 100 ani anti di cuesta era idem oggetto viva México cabrones
@mehmetyasarkus23815 жыл бұрын
Ben bundan nasıl sipariş verebilirim
@writingattitude26195 жыл бұрын
How to contact with you
@khareanand17083 жыл бұрын
big saijwala rotimekar video dikhaiye
@ismailkotawadekar92603 жыл бұрын
can you make it for me please
@sheikholiuddin68595 жыл бұрын
Beautiful result but too much complicated
@arupadatta43557 жыл бұрын
I was if you could sell one to me.
@woodplusmore35447 жыл бұрын
Hey Arupa, sorry for the late reply. I'm currently not selling this at the moment but if I do I'll be sure to let you know! Thanks so much for watching!
@DiannaAtherton5 жыл бұрын
@@woodplusmore3544 me too! I want one of yours
@VictorCantoTV5 жыл бұрын
If I make it... I Will sale in 1 million dollar. :P
@mariadelvalle78123 жыл бұрын
🤪🤪🎼🎼
@liliacerda40034 жыл бұрын
I went to your website and I couldn’t find this. Your website said it could have some nasty sexual stuff.