Oak Wood and Epoxy DIY Table / Woodworking

I make a great desk with oak wood and epoxy.
Hello, this week I am making a table with oak wood, which is a very durable wood. First of all, I shred the tree evenly with a wood engine, then I remove the dried bark part and prepare to shave it, you need to be careful in this part, as in my video, your router bit may break down. oak wood is a very strong and durable wood and it is difficult to process. But this kind of wood does not rot and wilt over the years. I continue the milling process with a small knife, which is safer but makes the work longer. Then I sanded the flattened wood and put it one by one in the crate I made for the table, this process is quite difficult but the result has been great. then I poured the epoxy resin and waited a day for it to dry. I took the dried table out of the crate and milled it, then sanded it from thick to fine sand to remove the milling marks and make my table smooth. as a final process, I applied two coats of varnish and built a table that can be used for years. if you like my video, don't forget to like and SUBSCRIBE to my channel. Thank you.
#epoxytable #woodworking #epoxy #diy
SUBSCRIBE to my channel :) / @halilibrahimkandemir
!!! Follow me on Instagram: / ahsaphali !!!
Some of My Recommended Videos :
• Epoxy Coffee Table Mad...
• Practical and Stylish:...
• Epoxy Pine Coffee Tabl...
music list:
1)www.epidemicsound.com/track/i...
2)www.epidemicsound.com/track/N...
3)www.epidemicsound.com/track/y...
4)www.epidemicsound.com/track/7...
5)www.epidemicsound.com/track/J...

[@ugurocakoglu6033]

Çok iyi 💐💐

[@serhattkltkl9471]

Perfect perfect 👏👏👏

[@halilibrahimkandemir]

thanks 😊🙏

[@cemrenazolmezel3378]

Harika 🎉

[@dportis47]

Very nice 👍🏽

[@okanboyac1755]

Very successful job, again

[@halilibrahimkandemir]

thanks 🙏

[@ved-5522]

Good

[@tayibekandemir]

Harika bir çalışma ❤❤

[@halilibrahimkandemir]

😊🙏

[@tugbakandemir6704]

Harika bir masa elinize sağlık ❤❤

[@halilibrahimkandemir]

thanks 🙏

[@user-lj1ht1de3l]

Ибрагим вы мастер .👍👍👍

[@halilibrahimkandemir]

Thanks ☺️🙏

[@cemilnalbant]

Eline sağlık kardeşim.Maşallah çok güzel olmuş 👏

[@halilibrahimkandemir]

teşekkürler🙏

[@YouHaveALotOfLoveHandles]

Woah your so talented and underrated! Keep up the good work, I love your wood creations!

[@halilibrahimkandemir]

I am very happy that you like my work. thank you ☺🙏

[@tugcedumlupnar1840]

❤❤

[@boboruml]

Nice work. If the bevel was down, it would be much nicer ;-)

[@halilibrahimkandemir]

thanks for the nice comment

[@r_gustavooo]

🤩👏👏👏❤👏👏👏🤩

[@marmotaworks]

😉

[@88rushrocks]

No bandsaw ? Truly looks great though

[@halilibrahimkandemir]

I'm so glad you like it 🙏. Yes, I don't have a bandsaw.

[@88rushrocks]

I’ve never worked with apoxy before any recommendations you can share? I’m a woodworker and usually make outdoor furniture etc

[@halilibrahimkandemir]

On my channel, I have many projects done with epoxy, and I've prepared a list for them. You can check there to see what you'd like to make. Additionally, if you have any specific questions or need assistance with something, feel free to write. 🙂

[@88rushrocks]

@@halilibrahimkandemir awesome and thank you

[@ved-5522]

Wood ?

[@alexeikonratev6153]

Проще было кору снять с бревнышка

[@redscorpionsix]

Perfect until cheap legs.. amazing work hairpin legs Nope