Oasisse 9 : Petroleum boiler also some excessive water dumping : Oxygen not included

[@olshanski]

Thank you so much for these videos. Great editing. My favorite ONI videos. I am learning a lot.

[@FrancisJohnYT]

Glad you enjoy.

[@crubs83]

In my version of the petroleum boiler build is to use doors instead of a robo-miner. I.e. I place a door or two in the chute where the lava falls down into which are open at all times until it's time to clear out the rock. When that happens, the doors close which instantly annihilates the rock in question. It's faster and simpler than the robo-miner design and is much less likely to require maintenance or suffer from sour gas leakages or lava overflows, especially if you're having issues with insufficient power. Now you might be wondering where I put the temperature sensor. Beneath the bottom door, I have it submerged in a tile of liquid lead. The lead always stays liquid so there aren't any issues on that front.

[@FrancisJohnYT]

Oh that is a use for lead that no other materiel could have covered, it's liquid between the boiling point of crude and the output temp of volcano's. If volcano's output was just 25C hotter it could turn the lead to gas, I wonder if the devs planned it that way. I'm stealing that idea for testing.

[@crubs83]

@@FrancisJohnYT Be my guest!

[@XconeArtist]

You're welcome about the top-access! .. or at least I've been doing that, too. Might have seen in dischord. But you might've seen it elsewhere as well :-D I've found that the blob of magma can sometimes still flash the drop of oil, even though it seemingly should always miss. I guess it depends if the magma "drips" down or "oozes" down. You've seen those water gooeyies in this vid, .. if magma does that, it flashes the oil drip. I don't know how to avoid that. So instead I moved the miner back one more tile. The slight diagonal the miner will need for that can be gotten by removing one corner tile below it. Ask on dischord if you need a screeny of what I mean. Dogsbodies: "Mammia Mia", "Momsicle" or "Yo momma" to stay near the mom thing. Or famous movie cleaning ladies: "Cinderella" and "Annie". I would add a masculine counterpart, if I knew any. =/ Tinkerers: "McGuyver" and "BA Baraccus". Maybe "Tinky winky"?

[@keltoi3000]

"Princess Leira". I know it's not particularly tinker-ish, but her name is Leira and she even has the hair buns.

[@FrancisJohnYT]

Technically Barry, Harry, Larry and Garry are ahead on points, but I may have to make an executive decision on this one as the hair buns is a pretty solid argument.

[@sbrubak]

I used your design for an oil boiler in my own base, but because I do what I do, I constantly deal with drops in service. I.e. holdups in oil delivery, plus I prefer to magazine petrol, so I modded it to be robust for variable flow, adt to be able to stop when the magazine is full. To do this I needed to add a petrol loop at the top leg of the flow from the boiler instead of the crude flow. this loop goes to a water chamber and drive a steam turbine to delete some heat. This ensures the petrol is below 400C when it hits the crude oil pipes (Prevent heat damage to those pipes) I added two safeties: a second temp sensor in the boiler chamber that goes red when below 400C and a pipe temp sensor on the petrol loop going to red if for some reason it goes above 400C. Both of these cut the oil flow. With these modifications I get a little power out and is robust to variable oil flow at the cost of using a bit more magma as the oil is a bit cooler when it hits the boiler.

[@FrancisJohnYT]

If your not maxing it out at 10kg/s all the time then you are saving magma, so a little bit of heat loss should still leave you well within margin.

[@thebebert8793]

The ability to cut down the frequency of the saves (included removing them) is vanilla from the Launch Upgrade Francis, just saying. Check your settings :)

[@FrancisJohnYT]

Doh I knew this already but completely blanked it in the moment. Sounds about normal for my brain.

[@frantisekzverina473]

I'm glad we know now why the drill cooling oil drop would sometimes turn into sour gas. I thought the falling magma interacted with it but the door push makes more sense. I solved it back then by putting the drill on the side of the solid magma behind doors which would open to allow the drill to do it's job. But the timing circuit was complicated as hell. Also I read somewhere that you can prevent pipe breaking during phase change by only pumping 1/10 or the pipe's throughput. Might be possible to keep the oil in pipe all the time and let it change inside, dunno, but you would lose the counterflow....

[@FrancisJohnYT]

To avoid the door push you can also lock the door :) the dupes kept going into the boiler room to grab the little bit of igneous debris that would every so often happen on the top of the two solid tiles. 1kg of liquid in a pipe will not state change, but to get 10kg a second you would need ten pipes. For a Sour gas boiler it's a great idea for Petroleum it's just simpler and way smaller to use the current design as far as I can tell.

[@MijnAfspeellijst1234]

Come for the boiler, stayed for the salt water mechanics

[@FrancisJohnYT]

That salt water helped me with my little steam problem.

[@VATROU]

I always hit the P instead of O to flip objects. It sucks when you're in a groove and it stops when you hit the wrong key.

[@FrancisJohnYT]

It feels like it happens to me one out of every three attempts to flip a building. Just one of the joys of ONI. Maybe I should remap that key.

[@VATROU]

@@FrancisJohnYT I probably have the same luck with that it feels too often I hit P. Oh well I suppose things happen like that. I wouldn't even know what to rebind it to that doesn't use a key in game.

[@FrancisJohnYT]

@@VATROU Maybe just don't bind it to anything, I never use that shortcut anyway.

[@elickson7340]

I always bind flip to R, i don't know why is not there by default

[@MonologueMusicals]

Watching a few ONI playthroughs and you're the only one actually playing the game to beat the map instead of telling cutesy stories.

[@FrancisJohnYT]

My friend once game me his copy of the game Star Wars rebellion, turn based strategy with lots of text and audio instructions. It was the French version and I don't speak french. 16 hours later he finds me crushing rebel scum and finishing the map, I still remember that Boucliers means shields in French. Does not matter the game the objective is to play efficiently. If you hate yourself and want to play Star Wars rebellion just go rebel, build fighter carriers and X-Wings they crush everything that game had horrible balance.

[@Hedning1390]

The value of the salt biome are the pokeshells. Yum yum. Also lime. You are not alone, the p button is the bane of my existence.

[@FrancisJohnYT]

Going to have to collect all the pokeshells and put them in one place.

[@alfredothepasta]

I love watching that industrial sauna working. One of the things I've wanted to do since the new patch is start using volcanoes to purify salt water in a boiler that feeds into electrolyzers/whatever else I need water for. I imagine with volcanoes you can get nonsense amounts of power out of just steam.

[@FrancisJohnYT]

Using volcano's for steam power is tricky, you have two choices. Take all the power you can while the volcano is active and have nothing when it's dormant. Alternatively you try and spread out the power generation for more consistent power generation. First option is easy but of limited usefulness, second option is more useful but much harder to accomplish. Going to have to try the second option at some point, I'm swimming in volcano's on this map.

[@efethecaptain6]

Construction starts about 3:53 11:00 second mark 21:42 10th tile

[@civiere]

That should work... i think... yeah, itll be fine... i hope... ONI in a nutshell XD

[@eventprogenitor1873]

Your not alone I hit p many times as well. Tinker dupes Wheeljack, Percpetor, Dr. Stone mainly i would draw from 80 cartoon-inspired names or pull from the comedy stuff like don't have it, lost my marbles, for me i just number the dupes and add abbreviations for their traits like DL means Diver's lungs, so 04DL and such. I would see about adding a steam turbine setup with a cooling room so the 125-degree rocks gets moved over and cooled to 20 degrees then gets shipped off for sand or what not to this setup then maybe that could be included into the power block part as it's cooling loop as well as for the rock.

[@FrancisJohnYT]

If the rock is ground up that will happen in the industrial sauna, also my power brick is going to run hot as well so no cooling there. Considering how I'm playing the map hot I'm not sure 125C rock lying about the place is going to be a problem so long as I keep it out of my core base. The joy of playing the map hot is i don't have to care about the environment. I'm going to move 100C+ petroleum about the map in regular pipes, why bother insulating it? I'm interested to see what other heat issues I can just simply ignore.

[@s0litaire2k]

keeping to the Thundercat's theme there's : Snarf, Jaga, Jagara & the twins "Wilykit and Wilykat"

[@FrancisJohnYT]

Haha what kind of dupe would Snarf be? It would have to be a dupe with bottomless stomach and pacifist. Their primary skill would be exposition :)

[@gaharmun]

One suggestion for a slightly different boiler setup: Build it down in the oil biome, build a diamond rod (2 or 3 tiles wide, depending on the length) that touches the core magma. And then use the steeldoor to transfer the heat from the diamond rod into a diamond boiling/conversion champer. The counterflow part stays the same. That is much simpler, diamond costs nothing and no driller, no automation required (except one temp sensor that toggles the door). Eventually you will cool down the core magma to much so that is solidifies, but that will take 10000+ cycles, so no worrys there...

[@FrancisJohnYT]

I have though about that in the past but it's pretty tricky. Even with the diamond rod the local heat draw causes the local tiles to solidify and the temp transfer with the surrounding magma goes way down at that point. The joy of the volcanic design is it never ever needs maintenance. A magma core design can net you maybe 5-10 hundred cycles. Volcanic is forever. But give it a shot and let me know how it works out, there is multiple solutions to every problem in this game.

[@gaharmun]

@@FrancisJohnYT I did build it. I put 3 oil wells (10kg/s) through it for 800 cycles so far and the magma temperature touching the diamond tiles is 1549°C... It started at 1650°C ish, i think and it solidifies at 1410°C so there are a few more cycles in it... (more than i intent to play the map, probably) apart from the initial heat up phase, the heat consumption is really not that big.

[@gaharmun]

btw: if you make the boiling chamber one tile wide instead of two, the pressure damage that happens when heating to fast (or too slow) is mitigated. The damage does not actually come from the created petroleum but from the unconverted crude oil that somehow got compressed by the petroleum into a single tile with thousands of kgs pressure (This game has "interesting" fluid mechanics :-) ). As far as i can tell, this does not happen if the boiling chamber is only one tile wide

[@FrancisJohnYT]

@@gaharmun Ohhh send me the save (email in about section) I'd love to look at it.

[@FrancisJohnYT]

@@gaharmun Interesting, I used to get pressure damage all the times with a one tile wide chamber. Thats why I switched to two tiles wide. But this was a long time ago and my testing methods were not as stringent back then. Will have to do a retest at some point.

[@bluslate6976]

You know the drill can fire diagonal threw blocks. You can eliminate all the doors and stuff and just use the drill to fire between the insulated tiles.

[@FrancisJohnYT]

That's an Idea I'm going to steal for the next design iteration. I wonder if I can get the right angle to hit both tiles.

[@rubikmonat6589]

18:05 second insulated pipe above that one, a bridge, a shutoff and a temp sensor, you could make it self-regulate for a fairly variable flow.

[@FrancisJohnYT]

Oh I see what you mean. Liquid pipe thermo sensor, if it gets to hot you shunt it into the top vacuum row. That will be a fun little side project for the next boiler tutorial.

[@der_schweizer_244]

how do i calculate the amount of loops i Need for the Petrol boiler? and the length of the magma droper? can i have the formulas? thanks

[@FrancisJohnYT]

The counter flow lengths were the results of practical testing kzbin.info/www/bejne/j4i0lJSrqJ6cnJY The length of the magma dropper was just a case of seeing how far magma flowed and making the dropper one shorter. The above video is a bit long winded but covers how I came up with the design details. However Aluminum was not release then so the current design was me playing around on the testing map again to figure out how long to make the counter flow with the new metal.

[@MrTactic]

I wish at least 1 volcano was guaranteed on map spawns. Kills me to dedicate a bunch of cycles into a map and then realize there are no volcanoes. Currently on a mega-base and just realized it also doesn't have volcanoes. (my last mega-base had the same problem) Going to look into a renewable form of magma now that you can bring it from space...

[@FrancisJohnYT]

You can use geothermal magma to run one, a pitcher pump and some bottle emptiers will allow you to move the magma around. Once you hit space you don't need magma anymore you can use a space metal aquatuner as the heat source. The reason I like using a volcano is you can set it up and never have to modify it again.

[@MrTactic]

@@FrancisJohnYT Oh! You're right! I had completely forgotten about Niobium. I usually only use it to get thermium for liquid hydrogen/oxygen. I'm working on a mega-base (40+ dupes) on an Oassise map with only the two default water sources. The 1:1 conversion would be very helpful to create water. With a niobium aquaturner I should be able to get there. Oassise is thankfully not a map lacking in energy. Thanks for the help!

[@bonk2065]

I have a problem the crude oil that’s is on the robo miner turns to sour gas when the magma drops and I reversed the build cuz I didn’t have space on the left

[@FrancisJohnYT]

Should work left or right handed. I moved the mining drill back and up a tile and that stopped the sour gas happening. Got a tutorial coming out tomorrow on it.

[@KaoVamp]

Question, would a boiler like this work with a metal volcano instead of just raw magma?

[@FrancisJohnYT]

Liquid metal flows very differently and would form tiles much easier and more than likely gum up the build. But I have not tested.

[@KaoVamp]

@@FrancisJohnYT Thank you for your reply. Will be testing it with a boiler once I get the materials. The big advantage of metal volcano in theory would be that it doesn't form tiles, rather once the magma cools you get loose blocks of refined metal. sitting on the last door until cooled when you can drop them down and collect them.

[@FrancisJohnYT]

@@KaoVamp Liquid metal does form tiles, I believe it's somewhere around 800kg if memory serves.

[@KaoVamp]

@@FrancisJohnYT Ah. I haven't encountered that yet, then again the way I accidentally cooled liquid metal was very weird. It may have been a bug, but I had the metal fall behind the neutronium tile under the volcano, cool down back there and pop up as blocks of solid metal, which is probably why it didn't form tiles. imgur.com/HOBXwzu see picture for how it looked. It's not visible from the picture, but there are blocks of solid copper in the clutter. Will see if I can replicate it on my current map and give a clearer picture.

[@Amalgam03]

can't you use an atmo sensor and an and gate to tell the automation that it's in a vaccuum? Or is that only a trvial problem that occurs once?

[@FrancisJohnYT]

Only happens once. When you have setup complete you should just fire it up and be done with it. Excluding the odd mistake like making the wrong thing out of lead so it melts :)

[@wreckcelsior]

Thanks for the vid Francis. Oh.. I noticed some people talking about naming dupes and it reminded me to ask... why no Baldrick? Seems to me to be the ultimate dogs-body. ;) cheers mate.

[@FrancisJohnYT]

Baldrick is the ultimate Dogsbody name, name approved.

[@Veeqaliber]

Can i do with a gold or iron volcano? I have no volcanoes

[@FrancisJohnYT]

Unlikely to work, the heat produced by metal volcanoes is not enough. You can use geo thermal magma to get one working, then switch to a space metal aquatuner as a heat source when you make it to space. Here is a full tutorial on them kzbin.info/www/bejne/j5XHpYZuj7CVf6c

[@thedougman2008]

obviously, mi-ma is the best name of all.

[@matteocdt5214]

what is the magma/oil ratio? i would like to know before any disaster happens

[@basbekjenl]

that was very interesting. like once again i learned a lot. (i'm not sure if commenting like this is a good thing i just heard it helps with the rating of a video so i am trying to just react my thoughts in the comment section for no other reason then it's the least i can do.)

[@FrancisJohnYT]

Don't worry about the ratings, I just do this for fun so relax and enjoy the videos as best you can.

[@MarcCastellsBallesta]

14:14 Quote from Antoine de Saint Exupery, WW french pilot & author of The Little Prince.

[@matanhazan-fuchs1456]

Why dont you use the automation switches instead of the pressure sensors?

[@S_Black]

Those used to require dupe interaction. Now they don't. So hydro sensors were more convenient then. That thing with the thermo sensor not triggering in vacuum has been fixed too by the way.

[@Speiger]

Since this thing is so power free in terms of consumtion. Could you use the rest of the heat from the magma (when mined) to produce steam to ensure that it is truly selfpowering? (Like make the droplet fall on to a heat transfer to a steam chamber ^^" (Yeah super efficiency i know) Oh yeah, by the way bothgar made the exact system i proposed to you in his latest episode (latest by time of writing). Assuming you follow him.

[@FrancisJohnYT]

I'm pretty sure you could use the hot debris to provide enough power to make it self powered. The down side is you then have to provide cooling for the steam turbine and a bunch of other infrastructure. Combine that with my natural laziness and I usually just leave it in a pile at the bottom of the boiler and move on to the next project. The effort vs the reward is just not good enough for me. I try to keep up with bogthar's stuff, last I saw he was raising an army of pips, the madman :)

[@artur6912]

@@FrancisJohnYT You said a design is finished when there's nothing to remove, Brothgar prefers to build like a mad genius. Still remember when he automated wheezword cooling by putting them on mechanized doors and slapping a termo sensor and his first comment was: "There must be a way to make this more complicated".

[@Speiger]

@@FrancisJohnYT no worry just wanted to know if it sounds reasonable to a madman that does care about perfect efficiency. Cooling could be maybe handled by a air cooler. Less efficient but powerdraw is less too and since you don't need much cooling you get the point.

[@JDPlays]

@@FrancisJohnYT Ignoring Lazyness, Hot Debris for steam, Aqua tuner for cooling, and if you can work out how a auto sweeper can tell the HOT derbies from the cold ones, you could move the cooled down stuff out and feed it to the hatches! Best idea i can think of When the steam chamber reaches 124C turn on the auto sweeper (connected to a weight plate) clear the debris out of a steam chamber, & ship to hatches. Then turn on a NEW auto sweeper when the weight plate gets to 0 to reload it with hot materials. It might work, I've found limited success with temp sensors and weight plates to detect cooling/heating of objects. Temp sensor on a conveyor line would make my life SO much easier!

[@francisdoherty5580]

14:00 So that explains why I always have extra parts when I'm done with a project. lol

[@FaithOriginalisme]

I hit the P button all the time instead of O!! I'm not alone.. yay

[@syn6109]

is a petroleum generator better than turning the magma in to steam power?

[@FrancisJohnYT]

By a huge margin. One volcano can give you 10KW of petroleum. Turn it into steam and it's only about 2KW max.

[@dpsilver1]

it just so happens that i had to build one of these and its a nightmare, so far, because i havent tuned it in yet and i dont really have a 'sink' for the excess petrol. time to get me some more slicksters but i have to tap into the raw power of the magma biome, have you ever tried this with a metal volcano i have an iron volcano in the same biome actually very close to my boiler

[@FrancisJohnYT]

Metal is much harder to work with, it's hotter, forms tiles in smaller amounts and does not work well with a magma dripper. I'd stick with getting metal out of them and maybe a little bit of power.

[@dpsilver1]

@@FrancisJohnYT as luck would have it my map has two iron volcanoes lol and i want to tap into the second one for a more "permanent" boiler ill see if i can at least get that up and running properly lol then i can share that save file with you time to build a large tank for the hot petrol ill probably sink some of the heat from it into a slickter ranch

[@FrancisJohnYT]

@@dpsilver1 good luck

[@bbearl78]

For Tempshift plates and Metal tiles, you still use the diamond ones and gold respectively. Are the aluminum ones not better for thermal conductivity?

[@maad_velocity297]

how did your map have an oil biome above the magma? i just get small pockets and so it’s more difficult to find some oil

[@pronkel]

as always thanks for the video :)

[@FrancisJohnYT]

As always thanks for the thanks :)

[@thegreybeardking]

"I'm developing Karmic Debt to the OCD people" I just had to laugh at this one. Question regarding the pressure blade: Instead of shortening the blade from 11 to 10, would adding a few tiles in the section above the blade on the left hand side push the magma to the right, therefore increasing the pressure so you didn't have to shorten the blade? Not sure if that made sense.

[@FrancisJohnYT]

Do you mean dropping the ceiling on the blade from 2 tiles to one? That would not change the pressure. Don't know why this blade failed to dump correctly, I need to do some testing over the weekend to find out what went wrong.

[@thegreybeardking]

@@FrancisJohnYT I don't think that's what I meant. Let me try it this way. You have what I'd call a primary vertical shaft of insulated tiles in the primary tank where the volcano is on the left side. To the right, on the 3rd cell over you placed your first set of 5 ladders going down. What if you made the vertical insulated tile section, to the left of the ladders, 2 tiles thick so it pushed the magma further to the right? Do you think that would create more pressure? It would make the primary magma tank, where the volcano is, smaller, which might push the magma through your blade.

[@FrancisJohnYT]

I went back and rechecked my old footage turns out the magma blade is supposed to be only 10 tiles long not 11. My bad. I found the relevant bit here - kzbin.info/www/bejne/j4i0lJSrqJ6cnJY It's amazing how many mistakes I can squeeze into a video.

[@IcyBalls-v3p]

I dont know if im a fan of making a system that relies on bunch of other systems. Like, its automated, but once your CO2 consumption goes down, or not enough oil is comming in, everything goes to shit. And you dont even have any slicksters and other stuff to manage your boiler and yet you start building it. Its like making a nuclear reactor irl without having fully functional control rods

[@Grazui]

I hit P instead of O for no reason too mate. It's a wierd error I only make on ONI too lol

[@rubikmonat6589]

F instead of D for me, I unbound it.,

[@FrancisJohnYT]

It gets me so many times, I don't know how i keep making the mistake.

[@chemist3678]

2:50 how can those ladders submerged in lava survive? Lol

[@XconeArtist]

Obsidian ladders. Obsidian is tough stuff! :D

[@FrancisJohnYT]

When you play with the magma, only use obsidian.

[@Logiwonk]

I never press the P button instead of O but I press the N button instead of B all the time!

[@FrancisJohnYT]

I should change the hot keys but the stubborn part of my brain says I should just man up and adapt. That part of my brain is a moron.

[@bashkovb5773]

Hey man are you still doing that discord server?

[@FrancisJohnYT]

I'm never on I'm usually flat out with comments or recording when I'm in front of my PC, but I really have to get back on there.

[@bashkovb5773]

@@FrancisJohnYT ahh fair enough, you do seem pretty committed to replying to comments. I just wanted to pick somebody's brain I'll have to look in the forums :p

[@richard2mitchell]

dups in suits are WAY better then you think lol....they can swim in lava the time it takes to build a later and still get out (hurt yes but alive).....so i heard...from a friend....that wasnt me...

[@FrancisJohnYT]

I'd call the dupe rights people, but they stopped taking my calls a long time ago. If I have to reload a save the game feels like a failure to me so I'm a bit paranoid about keeping my dupes alive.

[@richard2mitchell]

@@FrancisJohnYT lol yea

[@fada1922421]

aluMINium isnt it?

[@FrancisJohnYT]

Depends on where you are from, spent some summers in Boston growing up (Raised in Ireland) so I have a bit of a spread accent for word pronunciation.

[@Wisarut22]

I wish I'm this smart.

[@FrancisJohnYT]

It's not brains, just perseverance and lots of mistakes. Give it a go I think you can surprise yourself.

[@Wisarut22]

@@FrancisJohnYT Do you stream?

[@FrancisJohnYT]

@@Wisarut22 I'll a little to slow for that, this video alone was about 6 hours of game time. Not conducive for streaming.

[@michaelsotomayor5001]

30:38 automation reference

[@Franci0]

For opening that door you could have used a switch from the automation tab

[@MisterZealot]

A switch need a dupe to interact with it. The sensor doesn't you just change it from below to above.

[@olshanski]

Or an atmo pressure sensor allows you to toggle red and green manually without a dupe.

[@FrancisJohnYT]

Never fired one of these up in a vacuum before, little bit trickier than anticipated. If I was not in such a hurry I probably come up with something a little bit cleaner than a drop of crude.

[@PaulSwickard]

Tinker Dup Name: Mechanicleeze

[@FrancisJohnYT]

I can't figure out the reference?

[@PaulSwickard]

@@FrancisJohnYT It's an old reference from the Aladdin TV Show, his name is technically 'Mechanicles' kzbin.info/www/bejne/nqW6k2mZo8-Fj7M

[@MikeMazue84]

why not use the bookmarks mods, you can save your (automations) creations....

[@FrancisJohnYT]

Things keep changing, this boiler uses Aluminum piping which is new. If this was a minor volcano the heat exchanger would be longer. But I suppose the main reason is I'm just a sucker for punishment.

[@Speiger]

Dupe name suggestion: "SpyDog" (for a dogs budy) totally not a selfpromotion xDD

[@corbintheintern6229]

Tinker name: Handy Jay

[@FrancisJohnYT]

Hard to say no to that.

[@linearj2951]

Dogsbody names: Lister and Baldrick

[@FrancisJohnYT]

A red dwarf reference I'm sold. Being the second Blackadder reference is just icing on the cake.

[@linearj2951]

@@FrancisJohnYT oh smeg. Someone beat me to the cunning plan.

[@xpozec]

strange how all the problems regarding zombie spores just vanished from last episode to this one... strange indeed...

[@lucinide1020]

confusion noises

[@mit4601]

Amit, I would like to be in your hot base...

[@brevbomb]

When you press the pee button, do you have to use the "k" button then :D

[@sslandymann7104]

Can you be my dad?

[@FrancisJohnYT]

Nope not a chance, my computer gaming addiction does not leave any time for kids. But your more than welcome to steal all my designs and use them in your base :)