OCC checks out the new MX660 Mesh RGB gaming case from Cougar!

This new gaming case from Cougar has a mesh front for smooth air flow. The included 120mm RGB front fans put on a cool light show.

[@mateuspsdd]

If all the analysis of case done with such care, the world would be a better place

[@joaoguilherme2441]

I buy it three weeks ago and this is beatifull 🤗

[@azamatshaimyerdyen6037]

I bought this one for having USB C on IO and nice 3rgb fans. however bought same cougar 3 fans and it cost same as case lol. Can't wait to put 3 fans air cooler on top. Nice video bro, you really need to do more youtube videos. Subd and liked.

[@victorvelesvillavideos]

One question please, I don't know if you have heard about the new PSU from Corsair, the shift series that have the cables to one side, the thing is that they say that the case must have a minimum width of 210 mm, I know that this model does comply, but in your experience you see that the back cover is very tight or glued to the source... because I think it should at least measure more than 5 cm, so that the cables can bend and go up or go to one side.

[@davidm2180]

Fantastic review! Very thorough! Thank you!

[@user-od9zs8jn8s]

Will the Arctic Cooling Liquid Freezer II-280 fit on top?

[@gabrielgalvao9795]

I have the same case, and was wondering how to remove the front panel correct. Unfortunately this part on your review is cut out, can you give some advice as the direction and where I should pull it. Thanks.

[@thatwasveryscary5910]

I have also been looking for an answer to this question everywhere.. unfortunately I didn't find anything and broke front panel somehow. everybody just skip this part or remove it like i did - just using fingers and strenght, but mine broke.

[@SebsGongG]

​@@thatwasveryscary5910 Don't know if I can put another link from a different youtube channel, but search this review: Cougar MX660 Mesh RGB - back to the past, and take a look to 3:50 min. It will solve your question

[@chromabak919]

Such a complete review 👏🏻👏🏻

[@cuasimodus1]

Good video thanks, I think the front filter can be put behind the fans

[@MrKrozius]

I managed to get a hold of the last non-RGB ones, put 4 Corsair ML120s and a top mount H115i capellix AIO. The case is like having an airplane hangar to work on a car, so much free space

[@fernandomoreira1929]

Hey, instead of using 4 corsair ml 120s, what others kit fans do you reccomend? I have the b550m aoros elite so probaly i gonna nead a hub

[@MrKrozius]

@@fernandomoreira1929 The Lian Li UNI fans are awesome, they come with a hub in the 3 pack and they don't have so many wires, since they attach together. Other than that, I can also recommend the CoolerMaster SF120 argb Sickleflow fans, but you have to get a hub separately

[@Liicch]

Hi there! I wanted to revamp my system and get this case. In my old sharkoon TG5 i have my Enermax Aquafusion 360mm AIO installed in the front, though i want a case where it fits on the top since that will be better for thermals. Do you think i can fit the 360mm radiator with the fans on the top without it hittin the motherboard or the CPU power cables?

[@overclockersclub]

This case allows room above the motherboard for standard 360mm AIO (all in one) coolers. I didn't have any issues but I would put the end of the tank with the cooling lines at the front of the case. Depending on the motherboard, you might have to bend the power cables a little, but there should be room.

[@Liicch]

@@overclockersclub Awesome, thanks for the quick answer!

[@RemzM]

Hello. Thank you very much for your review. Is it possible to install 3x 140mm fans on the front? Is there enough place for it? I want to install three 140mm Arctic P14 pwm but not sure about it

[@overclockersclub]

I am glad you liked the review. According to the Cougar website, you can mount three 120mm fans, or two 140mm fans in the front.

[@RemzM]

@@overclockersclub Yeah, I saw it. I choose between this Cougar and Deepcool Matrexx 55 Mesh, the Deepcool website also claims the ability to mount two 140mm fans, but people write that they successfully install three 140mm fans with a little trick. Anyway, thank you. :)

[@overclockersclub]

Later today I’ll get the case out and verify for you.

[@RemzM]

@@overclockersclub This will help me a lot, sorry to bother you

[@overclockersclub]

@@RemzM I pulled the front off and verified that there is no way for three 140mm fans to fit. The total fan opening is 360mm and you would need at least 420mm to fit three 140mm fans.

[@saalmontopia]

How to Change Rgb in this model didn't got any software or anything.!

[@gameotic1]

Do you think this case can compete with corsair 4000D Airflow in terms of cooling. Do you think it better or worse or both will perform similar?

[@scares3859]

Corsair 4000D airflow has a better build quality and more noise reduction i think, but this case has more fans compatibility and a lil cheaper than the corsair one. If I buy this case, I'll just take out all of those non-pwm argb fans which comes with it, and install corsair Ml120s or LL120s in it.

[@BiggieBUL]

Hello, trying to decide between this case and the deep cool matrexx 55. Do you have any advice?

[@jasonhenninger8220]

just found this review. much appreciated. Have a couple of questions. Any difficulties front mounting a radiator with the tubes on the bottom? Any information regarding top or front mounting a 38mm thick radiator?

[@PapaMav]

Great review! What did you think of the fit using an ATX MOBO in this? Thank you very much.

[@dimvex]

Thx from Russia

[@BillyPage1337]

bought this one today for $78, great case for the price.

[@goku_danish]

How did you open the front panel 6:47

[@Madaraz21]

Hey great review i installed everything but the fans are not spinning any ideas ?

[@crusaderwithshotgun8945]

Thank you very much from Russia, your review are really helpful!

[@dfuzejunejo5561]

How to remove front panel

[@user-co9vf6pr1v]

Thank you 👍👍👋🇷🇺

[@niceoverprice4282]

Greetings from Russia!) Thanks for the great review!)

[@juliusnixon63]

i know im randomly asking but does anyone know a way to log back into an Instagram account?? I was dumb lost my password. I appreciate any tips you can give me

[@jasiahmarvin23]

@Julius Nixon instablaster :)

[@juliusnixon63]

@Jasiah Marvin I really appreciate your reply. I got to the site through google and im waiting for the hacking stuff now. Seems to take a while so I will get back to you later when my account password hopefully is recovered.

[@juliusnixon63]

@Jasiah Marvin It did the trick and I now got access to my account again. I am so happy:D Thanks so much you really help me out !

[@safiullah3441]

I bought the glass version. 👍

[@mrfoxgaming6943]

Is it any better

[@safiullah3441]

@@mrfoxgaming6943 Well i went with glass one due to the asthetics. It looks good with RGB lol

[@thatwasveryscary5910]

is it wrong aio mounting? should the tubes be at the bottom?

[@overclockersclub]

It is not necessarily wrong, but sometimes you can get some air pulled into the pump and you might get some noises as the air bubble pass through the pump - usually at start up. It just depends on how much air is in your system. They all have some air to allow for coolant expansion. Sometimes the case and cooler style (size) won't allow for the tubes at the bottom. I have tested and used many liquid coolers over the years and had them mounted in a variety of tube orientations and never had any problems.

[@thatwasveryscary5910]

@@overclockersclub thank you so much

[@k4n3k14]

Is it posible to put the gpu in horizontal and not vertical?

[@juansanchez2525]

I have same question

[@caldooo]

Yes it is, that is why it has 7 horizontal slots depending on your motherboard size.

[@AdanosSnow]

Спасибо, полезное видео.

[@Draigon18]

doesnt look like the Artic Liquid Freezer II will fit the top, 65mm height.. its one of the best, yet i swear i cant find 1 single mid tower that thing fits on grrrrrrr. 3 days of research :'( damn those motherboard heatsinks and the case makers! i wont give up it belongs on the top 😠

[@antohiba7128]

62 Dcb! Very noisy PC :(