Odin Makes: Among Us inflatable costume update! New visor, better feet and hands!

[@quietone610]

OK, I heard this when we were told to buy new suits as new engineers--nylon fuses its fibers in a DRYER. Apparently, rayon--and some other fabrics--breathe like Wool when new, but tumble dry it and it's like wearing a trash bag. You MAY get the same effect with a Fabric iron--if you want to try that--you'll know it's TOO hot because the fabric will exude smells and turn black as it carbonizes. I think. Maybe.

[@OdinMakes]

Tumble in a Dryer? I would never have thought of that... Thank you!

[@TheMichigami]

​in some fabrics heat makes the fibers shrink and pull closer together, in synthetics like nylon it can melt them if its too hot though. you can fuse it together a bit with dryer heat or ironing, even a heat gun through a thin towel to even it out, but anything too hot will just melt it and make it pull open into holes and curl into melted plastic so its a thing you have to be careful with finding the right temp for your fabric. (test swatches are your friend) i've ironed kites with wax paper and baking parchment as protection, a gentle heat treating of some kind might help the fibers close up the gaps a bit ^_^ also if you get in a fancy mood putting a ring of foam or flexible plastic around the very bottom of the legs to help them keep their shape might help the look, as would costume gloves of the same color of the suit if you wanted to get really fancy. the costume has turned out awesome though, especially with the updates.

[@nothingsurprisesmeanymore]

@@TheMichigami it will probably come out the dryer like a cat suit 😄

[@biancabrooks280]

@@TheMichigami yes!! Odin in orange opera gloves!!

[@heli400]

How about just adding straps to the bottom circles of foam so you can strap your feet onto them so they lift up with them?

[@ArmouryTerrain]

Thank you for going back over this project and explaining your process. Also a big thanks for not editing out the failed suit. I think that it is important to show people that not everything works the first time which is why R&D and proto typing can be so expensive.

[@GerryCanCosplay]

Now that's what I call dedication to the cause.

[@OdinMakes]

Thank you! I really wanted Red to work.

[@ahmadabram3761]

To the task***

[@GerryCanCosplay]

@@OdinMakes it's a shame it never worked

[@owntmpsn]

Hot to fix red suit 1. Cut in half (not smoothly) 2. Fill with teddy bear stuffing 3. Cover with red with white in the middle 4. Enjoy your dead crewmate

[@biowolf8333]

I was thinking the same thing since he seemed super upset about it not working right for him and this way he gets some awesome use out of poor rejected Red.

[@heli400]

Add a big fake bone too

[@jacobaobert]

red could still be used as a lawn decoration. I reckon those fans used for inflatable decorations would be stronger. either way, that would be a cool way to display these things at a convention booth

[@TheGeronimojack]

The Red color will probably never work well due to the "Red Shirt" curse started on the Star Trek series. LOL!

[@dickpeckerson7604]

WUT?

[@heli400]

Red shirts are “the” expendable crew mates

[@0JThomps0]

We did my daughter's with ripstop made for a kite(Amazon) and used 2 pumps. The 2nd pump was overkill but we're gonna put some ventilation holes in the top of the visor to prevent fogging and allow for some cooling. Flip flops were glued to the foam pads on the feet.I scaled the print to %85 because she's 5'2" but we had to add 5" to the legs. If I were to do it over I'd scale it to %90.

[@KingJake-om7yq]

I never thought I would see Odin took foam OUT of a build

[@roweproductions9424]

Red is always pretty sus 😂

[@michaelhraba1987]

I would think the "never wet" spray might work. This, when sprayed, makes water riole offoff in beads.

[@thegreatsaxtonian]

I loved this video. It's one of the things that I always want to see from makers on the platform, is when some projects just don't work out. As a Cosplayer myself I'm fully aware of when things just go wrong, and that in making these projects things must go wrong for you all the time, and i'd love to see more of that, because not only is it an opportunity to see that things don't always work out, but also an opportunity to learn from others mistakes and how we can go about our own projects and avoid those same mistakes

[@dumbass4826]

Awesome Odin, it looks even better

[@Lou-Lou-]

I love watching Odin make things while I make things myself for cosplay

[@thekrafty_narwhal859]

Imagine Odin sees this, btw he is such an awesome youtuber and sometimes I think he’s god making the things he does

[@OdinMakes]

I see this. Thank you very much Narwhal!

[@Archange6726]

Simp (This is a joke)

[@thekrafty_narwhal859]

lol

[@arshiajabbari5653]

@@OdinMakes .

[@arshiajabbari5653]

Lolololoollplooöloollolololo

[@KevinMeeker4L]

The pain in your voice when you realize the red suit isn't going to work ;__; Sorry Odin, but thanks for showing that not everything comes out perfect the first try and it's okay for things to fail and move on.

[@BGsModelWorkshop]

I really think it is cool that you revisited this project to see try different fixes. The upgrades to orange and blue really help make it!

[@codymarkham1094]

You need zero porosity rip stop nylon or F111 rip stop nylon. Same stuff they make parachutes out of. Zero P will be the best for the suits and F111 will let more air through! Hope this helps with future costumes!

[@FiddaDraws]

21:21 God that suit the blue one has on the far left, I want it so baaaaaaaadly and those helmets, where do they even get them!

[@jasonfabrick9308]

Sorry if someone already suggested this. Make a liner for the inside of the red suit out of blue or black so that the liner inflates and the outer shell is supported by the inflated liner.

[@DarthCobay]

Learning how to do elastic in that way was super helpful! I have a cape with an enlarged neck hole, and I wasn’t sure how to go about adding the elastic.

[@RP-EE-SaadUllahBhatti]

Commenting before watching the whole video cuz i already know it will be awesome because of the talent of Odin

[@barneyking5694]

You should try Dredds helmet from the Karl Urban Dredd movie

[@Cru128]

[@TheBeakedRook]

9:49 "Ight. Imma head out."

[@SOD_R]

I saw your costumes at con! I wanted to take a picture of your cosplay so badly, but I was too shy to ask. I really liked how creative it was!

[@deborahvalle5817]

I was literally thinking about using the plastic bag 😂 craft minds

[@OdinMakes]

Ha! I bet you could make it work!

[@mr.q6265]

These suits are genius

[@PaulXerxen]

You can always try taping the seams from the inside. Then you could also spray the corresponding g colour plasti-dip inside. As it's a rubber spray, it would seal up really well.

[@GBoy2974]

Sometimes manufacturers use colors to identify different capabilities. We use different color webbing for different uses because of the resistance it has. That could be a reason.

[@ZafiroDoesGames]

I would so buy an Odin-made Among Us crewmember suit for a convention

[@MacGivre]

A video to show how to improve a previously made object, I love it! Why not propose the making of surgical masks from anime or video games...?

[@rawan1047]

This man is a genius!

[@amberopalewski1592]

That is pretty cool how you fixing the amongus suit I never heard of months before sounds pretty cool costume I like your channels to the sounds like a pretty cool costume😎

[@dflavidb]

Would you ever consider making a warhammer prop? It would be awesome to see you make a tech preist axe, a bolter, or a space marine helmet

[@judymann6621]

Known Odin 25 years most genius prop man ever was or will be.

[@OdinMakes]

Thank you Judy mann!

[@MangoPiez]

This guys gonna be the blacksmith of the future

[@Cmmdre977]

You should make a knight of ren helmet, maybe trudgen or ap’lek? Maybe kuruk? Good video as always!

[@justingonsalves8744]

Have you thought about using flex seal clear it might keep the air from escaping

[@artsy_dragon_creations]

I love the new visors! I also think the Ziploc baggie idea was genius, but I’ll admit the magnetic tape is better. Now I wonder if there’s a way to get colored velcro so you could add Velcro pads to the costume to add decorations like hats and things to customize the suits. I also really liked seeing the trial and error process, most other prop makers don’t show that process, so it’s nice to know even professionals have to try new ideas and they may not always work. I also wonder if there’s a way to keep the foam feet so your shoes don’t poke out, but maybe glue in some cheap shoes so the foam moves with you. Awesome job though Odin, can’t wait to see what you make next

[@sidgaming896]

This man should have more than 1 million subs.

[@applejuice1576]

its amazing how he reacts to failure!

[@angelhalo6743]

I felt so bad for Odin I never seen him so pissed 😂

[@DynamicEllie]

Ourstore bought Baymax has 2 fans. Most of the inflatable suits you can buy appear to have 2 fans too.

[@Mythic2099]

Alright when’s among us irl I would love to see something like that (rlly love yours and the other among us costumes great ideas) 💯

[@MaximumUggo]

Din Djarin's full set of beskar armor including the helmet (jetpack optional)

[@WakandaEver]

Could you possibly make some Apex Legends melee weapons someday? Like Wraith's Kunai, Bloodhound's Raven's Bite axe, Caustic's Death Hammer, etc.

[@JonathanMorley]

Only thing I could think of is to line the inside of the red suit with the black material so basically a dual-layer suit. Since the black should work as well as blue it should inflate while still being red on the outside.

[@UniqBlue]

Best Quarantine protection in the world.

[@pedrocosta3706]

If nothing works for sealing red you could try to make it doubled layered with a color that is actually wind proof under it. The issue with this is the color that's under end up bleaching trough the red layer on top. But at least it would be sealed and it's also cheaper than most other options

[@stigyanblue1442]

Try an interfacing on the red nylon, and tape some of the seams.

[@StrangeWill97]

Hey love your videos Odin. You inspire my own artistic hobbies! Hope you make a Proton Pack soon I've always wanted to build one.

[@spacemom6637]

I really enjoy your videos!! I was wondering if you be interested in making inosuke’s boar mask from Demon slayer? I’d be interested in seeing how you’d work with the fur

[@MysticBuild]

Nice!

[@cpr-va3138]

Odin when you were making the mod pod mixer you should have made it 80% mod pod and 20% water because if it to water down the mod pod well not work the same

[@trash-lol]

“Well 4 if you count purple but purple was a disaster” me who plays purple: oh yeah.

[@shawngrabert5905]

Just face it Odin. Not only is Red sus, Red is the imposter.

[@DragonGateDesign]

Love the video, I know odin doesn't like DST but i can't wait for Monday.. For the last week its still pitch-black when i walk my kids to school, in a town of 5000 people not many street lights when hundreds of kids walking to schools on busy streets

[@CosplayingwithChad]

You made some really cool improvements Odin. Have you ever thought of using gloves with green sleeves that can be keyed out in after effects?

[@thesupertransformer1]

Odin acted kinda sus when blue fell off the table. Emergency meeting

[@jester4761]

Weird that the color dye of the fabric changes the density of the material. I would never have thought of that.

[@FriendB]

Lol, the video basically boils down to "Red is sus"

[@jinsawadaSG]

I would've outlined my shoes/ flip flops on the center of the foam disc and cut it out. Then I would glue the shoe in. That way it looks hidden anyways

[@sscrome]

I was wondering if contact cementing a wide Velcro strap in between two pieces of foam so you can attach the feet to your shoes would of helped, it looks amazing as it is 😎😎😎😎

[@santiagomunoz5216]

Nice and one of the first ones to watch the video

[@NickDClements]

I wonder if something like Camp Dry would seal it...?

[@seekertosecrets]

16:30 Wah! Wah! Wah! Waaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaah! Bummer,man.

[@aprilblackregentart6647]

I don’t know how much work it would be since I don’t sew, but maybe you could use the black to line the inside of red? With the new visors you wouldn’t see it

[@snipercan007]

Hey Odin,Do you have plans for warhammer like the suit or some of the weapons that the marines weild later in the future.

[@primeguy9855]

This is probebly the first time u ever made an update vid of a project.. as far as i know

[@StickyCarl]

Next you should make the chaos emeralds from sonic the hedgehog

[@aydennguyen9847]

I love among us, just a quick question, do you have patterns for the arc trooper helmet? Cuz i want to build one but i am a noob

[@RVR121]

Red has been ejected. Red was not the impostor

[@ClearShotYoOfficial]

Have you considered tent sealer?

[@MrFTW]

Awesome build that while some aspects might have been frustrating, I looks like you had a lot of fun making, and learned a bit in the process. A question I have is that scotchguarding the inside of the red suit, if it had worked, would the fumes from the chemicals have been too much to actually wear?

[@goatelope7539]

Phenomenal

[@cjmantel6026]

Would a tent waterproofing spray be an economical option?

[@MasatoKay]

I know its an end around, but what about lining the red suit with the blue material?

[@RAT-BOY1112]

You should make hats and accessories for the costume.

[@theskeetcenter6405]

Petition for odin to make the ben 10 omnitrix

[@gamera1962]

I wonder if someone will start manufacturing these.

[@BartSimpski]

Red is sus for not working

[@georgelianos5337]

Red was the inpostor

[@FollowingJa]

I always knew Red was sus!

[@the68special]

the black cloth seems to hold air just fine. why not put that inside the costume, like an inner liner.

[@dccaleb4267]

Súper genial

[@iwanttoaltf455]

It’d be cool if you made Emile’s helmet from Halo Reach

[@DirtBall136]

Red is sus LOL 😆

[@nocternuslol1625]

hi odin i would love it if you made the mace of barbatos from iron blooded orphans

[@Lowo404]

Nice video btw

[@hewhogoesevenfurtherbeyond9296]

do a shot every time Odin says the word "seam"

[@JustALilGuy5]

You should make Megamind's dehydration gun

[@hridaynarayangovind7987]

Bruh why r u so good?

[@hridaynarayangovind7987]

Just as a preview. Im a fan alright.

[@CatBurrito62]

I think all of us crafters one day go “Welp.*sniff”

[@JGDeRuvo]

It may be that you watered it down. Try brushing modpodge on and do in and out.

[@deyluvlathan5085]

Good stuff u should make Saiyan Armor

[@colemoore5007]

Did the elastic foot straps affect it being inflated?

[@narutodbz5082]

OMG I AM SO EARLY

[@ShuTheIdiot]

They're growing stronger. . . Oh god.

[@SlytherinReviews]

Red is the Impostor Impostor ejected, crew win

[@HavocHounds1988]

Would a clear coat have worked for the red one?