Ohh NO!! Again? ANOTHER NEW ENGINE REPLACEMENT on ANOTHER V6 petrol 1GRFE

[@joshuamclean6564]

I can tell you why the Prado 120 v6 reco engines are hard to come by and are expensive. Because they don't break so there are no broken ones to reco. Diesel engines dime a dozen, I wonder why.

[@guri131]

Cuz they’re used more and also production numbers are far higher

[@Razza2250]

might have something to do with the fact that 90+% of prados sold in aus are diesel. That usually helps with availability of used parts...

[@petermurphy2167]

2010 hilux V6 ,289000km towing trailers no problems only basic maintance

[@nic22bro]

Thank you for a great video. I had my rig up on stands today and this was before seeing your video, inspecting a radiator leak. Mine was leaking from a crack on the side, whilst under there I inspected all bushes, control arms, general condition. My LCA need to be replaced and I’m gonna replace the radiator. Got my quote. $614 for new radiator, LCA were $1383 for one and $1470 for the other one, coming from 2 different locations. BNE and SYD 😳 and that’s just for the part, not installed. For someone like me, I live remote your videos are fantastic, they help , really appreciate your work. Thank you

[@Fourby4Diesel]

I can send you both the arms delivered for under $2000

[@theseph28]

2005 Prado V6 with 502k, original engine, diesel are junk.

[@lowridingtrucks88]

Wow, thanks for sharing 👍 💪

[@PP-bm7zp]

have heard of plenty 1kds with those kms, calm down hero

[@editrains3840]

2005 Toyota Innova with over 650k, original engine, shut up diesel is not junk

[@iallreadyknowsunshine57]

Those suspension bushes look like super pro,they are purple and super pro use purple urethane where as nolathane are usually red,and the factory bushes are black from memory.

[@iallreadyknowsunshine57]

The problem is owners dont change the engine oil every 5000 ks,and they dont do proper servicing intervals with transmissions and differentials. These toyota v6 engines are bulletproof if looked after properly. The 1mz-fe thats in my camry are the best v6 petrol engines,the only downside is they didnt run a timing chain instead going with a serpintine belt. Id go a landcruiser over a prado anyday.

[@langthanee_pix]

Exactly, check the work after going in for a service. Very hard to find a good mechanic (any type of tradesman these days).

[@martinlang9615]

I too would love to know what brand bushes on the front wishbone suspension sides? These look great.

[@likemagic_kiwi]

Kzn185, 1996, about 300,000km top tank was brittle and split. Now 404,000km still original head

[@lowridingtrucks88]

Thanks for sharing 👍 💪

[@Retorter]

Hi mate... love you vids. Thanks heaps for all your time and passion! 1GR FE... U91 ok or should definitely run U95?

[@TheShamiester]

ive seen the broken rad on a 10 year old gx460 as well :(

[@Alidilman]

2010 onwards are bullet proof Car wizard America Scott Kilmer America They will explain about the amazing reliable v6

[@iallreadyknowsunshine57]

No before then mate,1mz-fe v6 engine are bullet proof even more so if looked after properly. My 2005 Toyota camry 3.0 v6 just clocked 300,000 ks and it runs like its a new car. One owner in 18 years,full log books up till 250,000 ks,i just did the timing belt,water pump,oil seals,bearings ect so she's good for another 100,000 ks. Doesnt use any fluids,oil changed every 3000 ks,and the older v6 engines are easier to work on. The only thing i dont like about it is the rubber timing belt,they all should be chains.

[@JasonHutchinson-f8l]

Hi, I just had the heads replaced (now) on my 03 petrol the same engine in your awesome video ❤,, should i run coolant in this with the new head & gaskets or run with just water... Thankyou very kindly if you could help.. Jason..

[@Arsopu]

Those CVs gotta bind and shutter under acceleration

[@dhiquobgnaloo]

I have a v6 Prado of similar age with 330 thousand k on the clock still runs great but if it did blow an engine i think i would just buy a slightly newer version with half the kays seems almost cheaper than a new v6 engine.

[@Arsopu]

The grande without air suspension needs the blocks bolted to the base. $200 but at least the spring shouldn’t fall out. 😂

[@KodyS-hs3md]

05 1gr. 430k. original. still claps a v6 challenger 😄

[@joshcoffey2567]

Both of my tow points are almost torn off

[@patronan3423]

That passenger side lower shock bolt looks a bit funny

[@philg2468]

Yes, its not done up!!!

[@dogg15]

Bad idea to use those clamps on radiator hose’s. The don’t allow expansion like the factory spring clamps.

[@martinlang9615]

Yeah, I grew up with worm drive clamps, but the factory self tensioning ones are brilliant and I’ve never had an issue with them. So simple you would think, how can that hold? But it does.

[@pigbelly100]

While I do envy you guys with Prado’s for the exterior styling, spare tire mount, second fuel tank, and manual transmission…………we got the better engine in our GX470’s. The 2uzfe is bulletproof.

[@DunateoRom8v37]

I have a special alarm that keeps pink toed elephants of my lawn. Those pesky elephants kills the lawns you know. Well, ever since I have installed them alarm, I have not seen a pink toed elephant again. I saw those mods on the same website as those alarms.

[@martinlang9615]

Are you talking Engine Guard? A bit Crypid mate.

[@iallreadyknowsunshine57]

Nothing against prados but if i was going to spend the money on a 4wd id spend the extra and get a landcruiser.

[@ben7020]

Yes its crap - the only thing it will do to performance will slow you down from carrying the weight.

[@Marksmith2-qu6tl]

Mine blew a head gasket this week at 260kks .how much for a new motor ? 😢😢

[@Fourby4Diesel]

just under $20,000 plus installation new There was somebody around saying they could rebuild them for about six grand or was it replace it drive in drive out for six grand I don’t know but they talk a lot of dribble so I don’t think it would really work out anyway

[@Marksmith2-qu6tl]

@Fourby4Diesel ok thanks for info 👍 🙂

[@Walterrinho]

How often did you replace the coolant?

[@krh007]

If you want to delve into the nitty gritty of the 1GRFE build quality and just how good this engine is then the US guys who are into adding turbo boost for some "serious" torque & power are leading the way which is fully explained in this YT video by an engine builder kzbin.info/www/bejne/h5zamWaKd9udl9k&ab_channel=MotoIQ. Most common events leading to failure of these engines is - not changing coolant regularly enough which leads to head gasket failure / water pump wear & tear with age / loosing coolant from failed radiator or hose etc leading to overheating which will warp the heads. Not changing oil regularly enough which is a well known issue due to lack of regular maintenance. Thermostat can fail getting stuck open causing high idle issue

[@Razza2250]

looks like that blue thing is basically clamping the induction hose to limit the air flow by acting like a throttle. That won't do any harm, but it won't do much more than limit engine power and make 100% throttle behave like 80% throttle. I don't like the idea of creating a vacuum in front of the throttle body like that though, bit like having a blocked up air filter. Now, the red clamps. Jesus donkeypunching christ what a terrible idea that is. LImiting the fuel flow (not pressure, but flow) isn't going to save any fuel. The injectors will just open for longer to compensate for the loss in flow and, at high loads, it could cause the engine to go lean and that will fuck up a petrol engine very quickly indeed. Silly ebay crap has no place in the engine bay of a well engineered vehicle. That's gotta be one of the dumbest "fuel saving" kits i've ever seen. It doesn't do anything that can't be done with the right foot and risks melting pistons or splitting fuel/intake hoses for what?!

[@spudboy1328]

I thought they looked like magnets...

[@101spirited]

@@spudboy1328 yeah magnets. If I recall correctly, magnetic field aligns the air and fuel molecules for better efficiency. What do they say about one born every minute?

[@toddclark1559]

This guy is possiblity the most annoying person on earth.

[@Fourby4Diesel]

My pleasure

[@JRMAC-xo7zp]

@@Fourby4Diesel he’s also very helpful providing free information for new Prado owners.

[@ronymorales3527]

What a wasting time

[@JoeFayad-v5z]

It’s not true , I have 2005 v6 1grfe with 400000 miles I never never had any issues period yet I’m still driving it