Oil Change CSC Motorcycles RX3 and RX4 Adventure Motorcycle Tutorial With Part Numbers

Changing your oil on the CSC RX3 and RX4 Adventure Motorcycle cscmotorcycles...
cscmotorcycles...
cscmotorcycles...
Our NEW, as of 8-24-2022, RX4 500 Mile Service Kit:
cscmotorcycles...
Parts Needed:
- 2 Quarts of Motorcycle specific oil
- Oil filter (Part# Z18-114) cscmotorcycles...
- 6 pack of oil filters is also available (Part # CSC-1002) cscmotorcycles...
- The oil filter O-ring is Z18-115 cscmotorcycles...
- The oil screen cap o-rings are Z17-106 and remember you need (2) of them
cscmotorcycles...
- The oil screens and O-rings are sold together and is Z17-107, please note that you do not need to replace the screens unless they show damage
cscmotorcycles...
- The RX-4 and 2016 and later RX-3 use the same drain plug larger 16mm crush washer the part number is Z17-110A
cscmotorcycles...
- The first model year 2015 RX-3 uses a smaller 14mm crush washer and is Z17-110
cscmotorcycles...
Tools Needed:
• 8mm wrench or socket
• 17mm wrench or socket
• Ratchet with medium extension
• Small flat screwdriver
• Needle nose plyers
• Magnet
• Clean funnel
• Drain pan
• Large piece of cardboard
• Shop rags
• Solvent or Brake parts cleaner
• Teflon Pipe dope
• Blue Loctite
• Eye protection
• Nitrile gloves

[@kevinramsay2932]

I'm getting ready to do my first oil change, do the o-rings and crush washer need to be replaced every time? The original tutorial does not mention this and I just happened to catch this new video, thanks for posting. Also, a video showing the valve adjustment procedure would be very helpful, thanks.

[@cscmotorcycles2297]

If you are thorough in your practice, it is wise to replace any O-ring, seal or gasket on disassembly especially ones that sits below the oil level. A couple extra ones will come in handy.

[@explorepakistan2023]

Can you guide us how to adjust ecu for different modes of RX3 for example economical or sports and which tool will be used?

[@JM52484]

Pro Tip: Use aluminum foil around exhaust underneath the oil filter and screen filters. Once done filling the motorcycle up with oil. Remove the aluminum foil to reveal a clean exhaust. Question, Can I use a K&A cleaning kit for the air filter on my 2021 RX4?

[@normie5928]

Joey is awesome. Helped me diagnose my fuel filter 2 weeks ago!Thanks again Joey!

[@eli8733]

Please so stator replacement please please

[@FranBar-q2l]

Good friend I would like to know if you can tell me how to program the tpms sensors in the tft panel of the rx4 thank you very much

[@cscmotorcycles2297]

Yes, contact our service department. We are glad to help.

[@eli8733]

Please do stator replacement please

[@chimis70]

How can I erase the maintenance notification in the tft screen

[@cscmotorcycles2297]

Tap the "MODE" button until your CURRENT MPG tab is selected. Then and only then can you reset the wrench code ( MUST BE CURRENT MPG TAB SELECTED). Once C.MPG tab is selected, hold the "SELECT" button for about 5 seconds and the wrench will reset. Be sure to check out other dash features in the following video: kzbin.info/www/bejne/n6KuYotjo7-SoKM

[@johnguilfoyle3073]

Why are these motorcycles taking the name of Mazda Rotary Engine cars?

[@lockfix24-mobilelocksmiths99]

Is this Zonghshen engine the same as the one fitted to a 2022 Fantic XEF 250 trail ?

[@enriquemotorcycle]

👍😷🇵🇪 Saludos, excelente

[@andrewganov]

Rx3 have the same engine (motor) or another? Zongshen zs177mm-b?

[@jamesmziegler]

Thank you for the tips!

[@wanderider321]

Much appreciated

[@عليصادق-ب1ع9ص]

Please 🙏 help me. Im in middle of nowhere. And i bought rx4. ABS light on. All the time. I dont know what to do.

[@trdadam2325]

define nowhere

[@عليصادق-ب1ع9ص]

ABS control location?

[@trdadam2325]

noneya

[@motoservicezonanorte]

Nice Video! Maybe you should specify that on the rx3 the oil screens are one at each side of the engine. Thanks!