Old vintage chainsaw bought CHEAP! How I got it running!

  Рет қаралды 4,443

High Priority

High Priority

Күн бұрын

Пікірлер: 15
@marcusw.3326
@marcusw.3326 Жыл бұрын
Did you have to take the fuel and oil reservoir apart to clean it? Or did you just access theough the filling holes?
@HighPriority
@HighPriority Жыл бұрын
I just went through the filling holes rinsing out with fresh gas to loosen everything up and it worked well.
@DH1942
@DH1942 2 жыл бұрын
Thanks for the tip on the ereplacementparts website.
@HighPriority
@HighPriority 2 жыл бұрын
Glad I could help! It comes in handy for a lot of stuff or even just for part numbers and then buying from Amazon or eBay.
@kiwi73
@kiwi73 3 жыл бұрын
Breaks my heart to see such a nice saw refurbished but not tuned right.. It cuts like a dog... Make sure you use 25 to 1 fuel oil ratio, second get the saw hot and tune it properly.. I used to own this exact saw and it eats the wood! Thirdly make sure your chain is sharp.. This is a great saw with lots of power... If its tuned right.
@HighPriority
@HighPriority 3 жыл бұрын
Thank you James for watching and pointing those things out. I too thought it cut pretty doggy but I thought the manual I found would be decent enough. I will adjust it next time it’s out. I’m glad to know once I time it proper it will cut much better! I have hardly used it since this video and I bought a pre mix can of 50/1 fuel, you think I should change that? Again thanks for the insight and I appreciate your comment.
@HighPriority
@HighPriority Жыл бұрын
@kiwi73 Jist wanted to say I used this saw for the first time in almost a year, played with the tuning a bit and wow! It woke up! Wish I had done it sooner, better late than never I guess. Have a great day.
@plata1753
@plata1753 3 жыл бұрын
Hey Boss: Thanks for the video. I have the same model Echo 302S. However my chain oiler fails to pump out oil. I've cleaned out the oil tank and checked the hose screen and it's clean. I removed the brass oiler plunger, o-rings appear to be in good shape and used compressed air to confirm the suction hose and the output port are clear. What do you think is happening?
@HighPriority
@HighPriority 3 жыл бұрын
How does the lobe on the crank look/ operate? Could something be going on there or it be worn to where it isn't pumping the oil pump? Just thinking out loud.
@KainKustomGarage
@KainKustomGarage 4 жыл бұрын
Nice video!
@HighPriority
@HighPriority 4 жыл бұрын
Thank you! Appreciate you watching.
@Vikingsloverw2012
@Vikingsloverw2012 3 жыл бұрын
Subscribed
@HighPriority
@HighPriority 3 жыл бұрын
Thank you Hunter!
@oldbowsaw9001
@oldbowsaw9001 2 жыл бұрын
kill the music-thanks-good video............
@HighPriority
@HighPriority 2 жыл бұрын
Thanks! Yea I’m always asking myself music? No music? Thanks for the feedback.
Will It Run? Echo Chainsaw 280E
25:57
Timothy DC
Рет қаралды 10 М.
We Attempted The Impossible 😱
00:54
Topper Guild
Рет қаралды 56 МЛН
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 15 МЛН
1% vs 100% #beatbox #tiktok
01:10
BeatboxJCOP
Рет қаралды 67 МЛН
Vintage Chainsaws - The Good -The So-So -The Weird
20:13
Mr Obsoletes Vintage Homesteading
Рет қаралды 16 М.
How To Fix An Old Echo Chainsaw That Will Not Run
11:54
Steve's Small Engine Saloon
Рет қаралды 93 М.
Mr. Obsolete: The Vintage Chainsaws We Use 60cc + Bigger
22:06
Mr Obsoletes Vintage Homesteading
Рет қаралды 4,1 М.
Basic work saw porting tips
21:15
Westcoast Saw
Рет қаралды 155 М.
Legendary old Power Saw, puts New chainsaws to shame
27:59
Buckin' Billy Ray Smith
Рет қаралды 192 М.
Rare Bow Chainsaw [Restoration]
59:46
Hand Tool Rescue
Рет қаралды 1 МЛН
Poulan 3300 Chainsaw Won't Start-Fixed!
14:28
The Greasy Shop Rag
Рет қаралды 4,2 М.
Echo Kioritz Vintage Chainsaw Collection (A Brief History)
16:18
Kain Kustom Garage
Рет қаралды 11 М.
We Attempted The Impossible 😱
00:54
Topper Guild
Рет қаралды 56 МЛН