OLGA Tutorial 1- Basic case, Parametric study

Рет қаралды 35,801

Күн бұрын

Пікірлер: 38

@indrakharisma7747 5 жыл бұрын

Hello. Thank you for this good tutorial video. Would you mind to give a tutorial video about how to use PVTsim to make fluid file? Thank you in advance!

@Mohandesie_shimi_ba_elham 5 жыл бұрын

مرسی بابت ویدئوتون. خیلی خوب بود. امیدوارم ادامه پیدا کنه ویدئو هاتون

@HatefKhaledi 5 жыл бұрын

سلام. فایل های بیشتری خواستید بگید

@SudanPassion 7 жыл бұрын

Yes, I do enjoyed the illustration. thank you.

@HatefKhaledi 7 жыл бұрын

Thanks Talha. Please do not forget to like the videos and subscribe to the channel.

@dospilas 3 жыл бұрын

good video 😀

@alikaziou6179 4 жыл бұрын

thanks a lot bro......

@LauraCamilaOsorioOjedabjlaura 6 жыл бұрын

Thanks so much. it was a good video

@chungthao5336 2 жыл бұрын

Your video are very useful. I look forwards to give a turtorial video about how to use PVTsim to make fluid file? Thank you in advance!

@henrychrischristopher7701 4 жыл бұрын

good

@gazelle20111 2 жыл бұрын

Any tutorial on how to use compositional tracking?

@kamalahasank9622 3 жыл бұрын

Hi Mr.Hatef Khaledi, Greetings to you. Do you have an experience using OLGA HYSYS link and have you done any simulation on the same?

@Alloui_khaled_maths 4 жыл бұрын

How can i download the pvt file or multiflash ?

@sdrah281109 4 жыл бұрын

Hi, thank you for the tutorial. Can I put inlet pressure as input?. As I know, olga only allows to input outlet pressure. Thank you.

@godsgrace458 2 жыл бұрын

Sir please make vedio on leak detection analysis in multiphase flow

@arjitkumarprince5537 5 жыл бұрын

Can you tell me how is your simulation results coming different than the usual laws...for a given flow rate, a larger pipe will have less velocity of the multiphase fluid and if we are operating in friction zone then less velocity gas will have a lesser pressure drop or in other words the inlet pressure required will be less .....in simple terms larger the size better the pipe since for a given flow rate we will be requiring a lesser pressure drop thereby saving pressure energy....how is your results opposite to general trend...can anyone else explain ?

@xiaozhang6565 4 жыл бұрын

you are correct. I'm pretty sure a pipeline with a larger diameter corresponds to a smaller pressure drop, which means lower inlet pressure given a constant outlet pressure and flow rate. Actually I got this trend in my simulation.

@carlosarengas7875 6 жыл бұрын

thanks

@madeofblack1565 3 жыл бұрын

Hi, may I ask how you added QLT to the trend plot?

@kinhnguyen1374 5 жыл бұрын

Please tell me how to define a different mass flow rate at different times. I tried it and said that all the values must have the same length. I also tried to repeat them as well, but still does not work. Help

@lecuong1008 7 жыл бұрын

thanks so much for this video. Could you please make a video about creat sea.tab in PVT sim?

@HatefKhaledi 7 жыл бұрын

Thanks for watching. Hopefully this will be done soon

@bedhiefahmed9976 3 жыл бұрын

@@HatefKhaledi thanks for this video. did you make a video about creating sea.tab in PVTsim

@mahfoudammour7957 4 жыл бұрын

Hello sir , was wondering if there is any opensource that can make coupling btw OLGA and STARCCM+ from Adapco .. All the best

@theodor-alexandrutufa7545 6 жыл бұрын

Hei! Please tell me how to define a different mass flow rate at different times. I tried it and said that all the values must have the same length. I also tried to repeat them as well, but still does not work. Help

@danielbrett247 5 жыл бұрын

Hi. The number of mass flow rates specified needs to be the same number as the number of time points specified.