OMPHOBBY M4 | Tight Space Low RPM | MSH BRAIN2

This is a fun little flight on the OMPHOBBY M4 with the MSH BRAIN2 at 1800RPM, my low headspeed which grants smooth 3D Capabilities with extended flight times. Thank you Roger at OriginHobbies for providing the BRAIN2 and 1800mAh battery for this flight!
Battery used in this flight: originhobbies....
Flight controller used: originhobbies....
Receiver used: originhobbies....
Matching Radiomaster transmitter: originhobbies....
Find the M4 here:
USA: www.buddyrc.co...
Europe: originhobbies....
UK: www.scotiarc.c...
Global: www.omphobby.c...

[@hahnsmantra7276]

That's an insane amount of firewood

[@ometoon]

Wow Jonas! Very well controlled with that headspeed and tight space. Literally no room for error! 👍🏼

[@diamondt88]

Beautiful flying

[@RCCopterLove]

Thats great, precise flying!! Inverted flying around and between trees... soemething you don't see every day! I thought all the time: this wood everywhere is kinda hard and not very forgiving. Very beautiful place by the way!

[@rambole40]

Bist du überhaut ein Mensch??? Auf so engem Raum mit der Größe zu fliegen....KRASS! 😀👍

[@helmut-h.8938]

Unbelievable amazing

[@cyberneticinterfacemodular3996]

Very good.

[@Adelmeister371]

Geil!

[@djoelveron7764]

What should i eat so i can do flying like this😊😅

[@merlavery5057]

This Dude bad bros.

[@arturosierra413]

Hello Jonas ¡ First of all Congratulations and mu admiration for this great M4 , I am just about to order mine ......just one advise from you ......What FBL system should I get ? As you know FBL systems are usually overpriced , really expensive and hurts the wallet , what would be a best moneywise and performance on the M4? everything else is under control for me

[@anthonypsantos]

Hello Jonas, great flight! Do you if it’s possible to have telemetry in this combination?

[@jigglypuff4227]

Im nächsten Video einen Looping mittig durch das Loch beim Holzstapel. Solch 3D Flug fehlt noch auf der Welt mit RC Helis :D

[@rexfpv]

Do you have a tail vibration issue at all? I can't for the life of me find out why it's so prominent on my model. It rattles the thing most right at 80% throttle. I've static balanced everything, and spooled it with and without the head and tail assemblies. Seems like some sort of harmonic resonance but idk.

[@stefan2369]

Ist der Riemen Lose?

[@jigglypuff4227]

Jonas, könnt ihr eventuell noch einen zusätzlichen EPP mold rausbringen für den M4, den man sich dann einfach optional als Zubehör von euch dazukaufen kann? Das wäre doch eine klasse Möglichkeit das größere Modell so darin zu verstauen oder transportieren/versenden etc. Kannst ja mal im Team fragen, was ihr von dieser Idee so haltet. Viele Grüße

[@geckowingman]

what you using to record with if I may ask?

[@Johnny31297]

Hero 11 👍

[@massivesimracing4937]

Absolut beeindruckend und sehr schön anzusehen! Großes Kompliment und großen Respekt! Folgt so ein Flug einer festgelegten Reihenfolge an Flugfiguren, ist die Abfolge also GENAU SO fest einstudiert, oder werden die einzelnen Elemente einfach "spontan" aneinandergereit? Viele Grüße, Daumen und Abo sind Dir sicher! Stefan

[@lu_is_flying]

Jonas fliegt meistens frei Kopf…ein festes Programm macht es langweilig. Frei geflogen kommt man auf auf gute Ideen😂😅

[@massivesimracing4937]

@@lu_is_flying ...und wie lange fliegt Jonas schon Heli?

[@lu_is_flying]

@@massivesimracing4937 er fliegt seit 2010😃

[@Johnny31297]

@@massivesimracing4937 Ich sehe mein Sekretär hat sich schon um die Anfrage gekümmert, danke Luis 😁🤝

[@massivesimracing4937]

@@Johnny31297 ....der "Sekretär" hat aber schon einen sehr eigenwilligen Schreibstil...Trotzdem Danke 😆

[@stuartjones8869]

Can I ask about your Brain 2 gain settings. I see on your setup (Revision 2 18/5/23) that you have much higher P gains on the Aileron (eg. 60) than you do on the Elevator (eg. 22). This seems to be the opposite way round to the MSH defaults. I would expect the Elevator gain to be higher as it has more inertia to overcome than the Aileron.

[@Johnny31297]

Yeah, but the inertia also makes it wobble more easily, elevator needs a lot more damping. I initially had higher gains in rev1, but that would occasionally lead to wobbling, so I lowered them.

[@user-myoungE]

Flying is so cool. My chopper was also balanced on the rotor, but it vibrates a lot. Especially at low rpm.. the skid is shaking. What could be the problem?

[@Johnny31297]

Blades too tight, hit a resonance, dampers too hard, many possible causes

[@HugeVictor]

Have you tried this on 4s?

[@Backyard_Buzzard]

did you chop all that wood?

[@jigglypuff4227]

prolly not, lol

[@Twx97]

Pitch range?

[@Johnny31297]

+-16° Collective, +-15° Cyclic