Omtech Pronto Hands-On Review: Best Laser Engraving Machine?

[@hydbond]

Ryan, You go above and beyond for your following and us! We appreciate everything you do. Keep it up💪

[@RISENGRINDWORKSHOP]

Appreciate the kind words. Happy to work with and promote companies who share the same values and work ethics we do here at the Rise N Grind Workshop! Thanks Noah!

[@Joshkline83]

Keep posting these pronto videos. You’re the only guy posting anything about these new ones. I want to get one.

[@RISENGRINDWORKSHOP]

We are just getting warmed up with the Pronto Content. Appreciate the comment and kind words!

[@jleigh982]

​@RISENGRINDWORKSHOP YES PLEASE 🙏 I have the pronto and I swear it's like finding content with it is impossible.

[@bryanellis5715]

Is it true that the pronto series comes apart in 3 pieces to make it easy to move? Looking to get one but workshop only had small door

[@RISENGRINDWORKSHOP]

The Pronto has a new frame and body design. On the website you can see it comes apart in 3 sections. I know some people have taken their units apart to get them into some tight quarters. I don't know how easy that would be to do honestly.

[@beentb4805]

Can you add a lightburn camera to this

[@RISENGRINDWORKSHOP]

Yes you can! Thanks for the comment. If I end up adding a camera I will film a HOW TO video to the Omtech Pronto Playlist I have started

[@beentb4805]

@RISENGRINDWORKSHOP i really like this laser, and I'm trying not to let it not having a camera steer me away.

[@RISENGRINDWORKSHOP]

@@beentb4805 Not an issue. Many compatible cameras. You will just need to confirm it works with Lighburn. Many tutorials on KZbin on Adding a Camera to an OMTech Laser! It's a beast!

[@beentb4805]

Thanks so much, and I hope you and yours have a very Merry Christmas

[@Todd-W]

do all us Pronto 75 owners a favor and have OMTECH send you a 75. Then record a video how to get the stupid honeycomb bed out of it! Nice video btw, thanks.

[@RISENGRINDWORKSHOP]

Now that I think about that, I still have yet to remove mine and it's still zip tied down :)

[@Todd-W]

@@RISENGRINDWORKSHOP myself and two others I know that own the 75, cannot get these beds out. OMTECH says "oh slide it all the way over the left y axis, then tip it up on the right side and take out". Problem is 1) no way it's going out the rear pass thru like the AF3555 and AF4063 models because of the locator pins on the bed and 2) the laser head assembly (without the laser nozzle attached) does not go far enough back regardless of where it is on the X axis, to provide for clearance to get bed up and over the Y axis rail.

[@RISENGRINDWORKSHOP]

@@Todd-W I will take a closer look at mine next time I am in the shop. Interesting to hear!