ONE OUT AND ONE SPLIT !

[@ghostrider7688]

For everyone complaining why are they fixing yokes and buying old gear you are completely missing the point . This is the Stewart trademark , fixing Masseys n keeping a classic fleet in the yard . They are living the dream these folks . More power to them 👍🏻👍🏻👍🏻

[@mickeyjoe-ne1og]

great to see lads using ther hands

[@simonscott1873]

Bet they haven’t the big finance payments and more money out of the job than most

[@feirmfactor859]

It's fine if they were only doing thier own work but when you are contracting, it's a different story, you need to have good gear, farmers don't wait now like the 80's, requirements are different, efficiency is key. Father phil is a genius, but they must have patient customers. No disrespect meant.

[@mickeyjoe-ne1og]

@@feirmfactor859 they have lots of good gear and doing repairs themselves saves them a small fortune

[@patlydon519]

​@@feirmfactor859imagine having that arriving into the yard and broke up after 20 mins, been there with others, time to modernise and get serious

[@coughlantom4139]

You got two great engineers there with you, love watching them solve the most complex issues without a panic. Keep 'er Lit.

[@ianwilson833]

Great Video, listening to Lee and father Phil go back and forth is hilarious, and good to see the 6480 back ready for working again 👍

[@richardknott7280]

Can't beat a bit of ripping! Hope you find out what's wrong with her Phil and it's an easy fix, look forward to the next video, good luck

[@wulliewhyte544]

6480 be back in before Christmas 😂

[@colmanlong1032]

Hopefully a long time, but ue seem to have nothing but breakdowns with them Masseys.

[@OxxFreddyGlasgow.]

Great work. Lovely to see how you restore the old school and keep them alive

[@Gearoid35]

Great work love the workshop videos

[@johngreen4179]

Great Vid Phil and youve got to love Farther Phil

[@johnlydon533]

Great video Phil. Enjoyed watching. 👍🏼👍🏼

[@ciarangally1]

FANTASTIC VIDEO REALLY ENJOYABLE LOVE SEEING THE 3000 SERIES TRACTORS GETTING FIXED 👍 😀 👌

[@wallm1206]

Remember these boys own all there tractors......the bank don't own them like most other contractors around the country

[@kevingovier5090]

Good video Phil, good to hear the banter with you, yr dad and lee, I’m sure tractors will be perfect 👍

[@Ah_Dermot]

Always good to see Lee and Father Phil hard at it in the workshop!

[@Alejandrogarcia-fp1fr]

nice video, you can give a good clean in the cab in the tractors when they came to the workshop, and a full clean with the power washer, really nice videos in the shop

[@seanking9325]

I'll give it a week before the 6480 breaks again 😂

[@NoelWalsh-q4e]

Lee and u dad is brillant phil they know there stuff

[@davidkellet1006]

Because they are RED there's allways 1 in the shed good job your dad is a good mechanic

[@DianeD862]

Our favourite farmers in the world 🌍.So so good luck 😉.

[@farmerslife2612]

Hi farmer Phil that was a great job with your tarter and keep up the good work with all on the farmer 🎉🎉🎉🎉🎉🎉

[@irvenrathburn9421]

Hi Phil, things are going along Nicley, soon the tractor's well all be back in action.

[@Patrickreillyjames]

Hi farmer Phil I don't know about that tractor it seems to be in the shop allot off the time,time will tell maybe you got all the problems sorted good luck and God bless you and your family

[@concernedcitizen3163]

fuck off with the god bullshit, nobody here believes in that crap

[@joestiller4270]

She be back in the garage in mid Jan

[@ColmToner]

You left the 6480 lying out in the muck and rain for 2 year's no wonder its playing up

[@user-lz8jx7vw3u]

Next time it breaks down Phil gallon of petrol and a match

[@petergardner2334]

allway good to see how your doing it

[@bobbybrownshoes940]

2 days and she'll be back in the shed....😂

[@robertdonnelly385]

Father phil will end up giving that 6480 away to get rid of it,all the vids on it arent helping its trade in value 😂

[@olivertraynor3712]

That tractor will be a sweet tractor with a turbo,work a 3120 of a few summer's years ago, and loved it,just a friendly word of advice,Phil, put sand on the oil spills,saw dust is just a fire waiting to happen, love the video's, 👌

[@WilliamOttley-v8p]

Good video farmer phil❤❤❤

[@dplawson2366]

Might be a good idea to spend a few minutes cleaning the windows when you have the tractors in the shop

[@michaelsmyth8125]

Looking forward to seeing the 6480 flying again.

[@patodwyer721]

Nice one Phil 6480 is bullet proof now

[@user-zu6qn9ux9n]

You’ve went and said it 😂😂

[@78mikehayes]

@@user-zu6qn9ux9nthe kiss of death…

[@simonhill2254]

Not all 6480s fault prob 50 per cent yours if right now should be a good tractor

[@lukagiltrap77]

I'd give her to Sunday!

[@alfielace6465]

whys the 6480 got an odd wheel on the left om the front

[@martymartin2894]

Is that the tractor that was recently bought, that they thought had very little wrong with it except a small gear issue. Now its completely in pieces.

[@jameshussey4900]

@martymartin2894 does it look like the same tractor?

[@martymartin2894]

@jameshussey4900 I don't know I can't remember if I knew I wouldn't be asking.

[@OOpSjm]

Did you not follow along? It is now getting a turbo conversion, new transmission internals, rust repair, and respray. Like new condition.

[@johnmchardy4502]

They love fixing fergys all a good challenge 😅

[@martymartin2894]

@@OOpSjm so I'm correct it is the same tractor.

[@Shaun-cm3di]

Phil do you have any idea where I could get a wiring loom made for a 3095 the one that comes from the brain under the step any help would be appreciated

[@ronaldlucas5360]

Enjoyed

[@claetuswoodroofe1854]

The 6480 has to be kept because it was Ian’s last tractor he drove a lot

[@OOpSjm]

Breaks? A blown fuse and long overdue rack maintenance.

[@WalterEKurtz-kp2jf]

Yea, it would help if you used it right and it wasn't and over 8 year old bucket😂

[@padraigking5185]

Good stuff

[@fergalkehoe9325]

Jesus phil go get that bucket professionally Repaired will ya no wonder it keeps falling apart a very big agri repair there

[@gearsandtears7643]

Just looking at the 3095 it's a good bit smaller than the 3125

[@grassmen7626]

Where is Lee from sound like northern Irish

[@AbdelhakimBenelhamra]

Hello sir, I am from Morocco, I work as a general farm worker, I saw your farm on KZbin and I liked it very much, so I want to work in your beautiful farm, or help me get a job in one of the beautiful farms like yours

[@concernedcitizen3163]

I own a banana straightening factory, I need good workers

[@AbdelhakimBenelhamra]

@concernedcitizen3163 I'm from Morocco, I'm ready to move and work in your factory, can you tell me all details please

[@johnw13473]

Got problems with a 3635 its jumping out of reverse so its going to have to come to bits

[@MullahoranNS]

whould you recamed a 6480 do you thick there a good yolk or is a 6290 better

[@EamonMcNally-s3h]

The last of the 6480s were good , early ones gave grief like this one

[@iqbalsidhu6651]

Well come ji

[@Timmy-v1n]

Nice tractor

[@paulbeckett5496]

6480 won’t see the workshop until this time next year for a service

[@homey3051]

This is why you leave the workshop open to be able to fix the never ending equipment repairs that keeps the farm operating

[@andrewwebb2691]

Might as well change the clutch plate while its open

[@ivorcallaghan4060]

Some of the bits will come out the front but the gearbox is going to have to come out

[@JayKehoe]

I reckon 2 months 🤣🤣🤣

[@Rmac-eb2zb]

Dyno your 3095. I’ve a 3085 doing 159 at the shaft

[@FirstnameLastname-qe3ry]

Give it 2 weeks and the hydraulic pump will fail

[@wexfordforstrawberries4641]

Ifs its red its always in the shed 😂😂

[@joefoley457]

😃😃🚜🚜👍👍

[@damienely7614]

☝️

[@SteveFilby]

Another great video phil. 6480 I give it a week before she breaks something.

[@gerrymulligan2602]

Hope that tractor wort it finish

[@ainedevine3464]

5 day

[@ericdineen4842]

Phil it will last 2months

[@brown6480]

Won't make it to December

[@brendankearney2640]

Father Phil and lee have great patience with u when Ur in around the garage with that camera wouldn't be me anyway ya be told politely where to go anyone know what lee does be saying 😮

[@patrickkelly1055]

How do we get to see the videos if he doesn’t go in with the camera? 😂

[@brendannaughton1996]

That's how he makes his money.i have no fault with lee talking.

[@michaelstaunton1632]

👍👍👍 🚜 🔧

[@LiamPhelan-x9x]

Trade in the 6480 nd buy a new tractor. Call up the finance man nd put her on hp. Down time cost money nd time Phil.

[@concernedcitizen3163]

what a totally stupid idea

[@eamonohanlon2029]

Ye must spend a fortune on restoring tractors

[@marctunney3743]

Jesus Christ father didn't weld that ? Be right for a day

[@greggroome2791]

👌👌🙏🙏💪💪👍👍🇮🇪🇮🇪🇮🇪