One way how to extract a broken screw + drill and torx key.

Method to extract a broken screw from the inside of a car piece using a torx wrench.

[@_dimitri_1242]

I worked on my honda for the first time and broke a bolt on the valve cover. Smh. Glad this video was made. I even listened to the same song just for extra luck.

[@nelsonrimas5434]

Same issue with honda car boss

[@JDMSTRT]

Me im experiencing this hays 10 size valve cover bolts

[@maynorcorderoportuguez317]

@@JDMSTRT qxx""""“0

[@SumProject18]

Mine is on my Zero Turn's starter bolt 😑

[@Dwigt_Rortugal]

📻 Another one bites the dust... (Tools breaking)

[@adamariemehani9110]

As a mechanic, I come across broken bolts often and spend crazy time to removing them. Your method, will work better than an extraction tool that often does not work. Thank you.

[@murisec54]

Gracias por su comentario, le invito a ver: kzbin.info/www/bejne/qX3PaGChbphmars SALUDOS

[@nealios93]

Facts

[@shaunatate7740]

Broke off 10-24 screw while screwing into aluminum. Didn't realize the hole I tapped was for a 6-32. I picked up the wrong tap lol. So screw broke off while screwing in. All other vids used screw extractors. Not a fan. Definitely gonna try this one.

[@nealios93]

You're a lifesaver. I spent an hour using an extractor and this method took me all of 5 minutes. About to pick up a set of torx sockets

[@joependergraft6593]

Worked like a charm, thank you!!! I had a broken bolt in the head of my 454. Used 7/64 for a pilot hole & then a 7/32. #27 torn & it came out as smooth as butter. You ROCK!

[@Username-ng8jy]

Dude my lq9 in my truck. Got all bolts free. Then noticed a bolt was missing. Looked and shit is broken flush on my head. So 7/64 then go to 7/32 then t27?? Fuck. My engine is in place. I can remove the wheel well and gain access. Luckily I’m small enough to fit and work. I just have to remove heat shields. This shit has been lingering in my head since thanksgiving man lol

[@gearoidclancy8451]

Probably one of the most useful Videos on KZbin..... saved me a trip to the hardware store and the cost of a bolt extractor!

[@franceslambouths5742]

Oh my goodness you Rock I had that screw out in less than 10 minutes best advice ever 💯

[@rpg500e]

Just had to add my comment since this saved my ass. Had a speed sensor bolt that broke off in the steering knuckle. It was a fairly small 10mm bolt head to give you an idea. Used a 3/32 drill bit and a smaller T10 torx (figured I'd start there and go bigger if I needed). Didn't drill too deep for fear of not drilling perfectly straight, worked like a charm. Thought I'd throw my testimonial and numbers here in case it helps

[@user-fp1ol4gu9g]

pulled me out of a deep mess as i had a set of long torques all the extractors to short you vid saved the day many thanks

[@skippr76kz]

Store bought extractors were not working. This method actually worked great! Thanks!

[@nathancof]

I spent over 50.00 in Bolt Remover kits that didn't work, but this did. Thank you!

[@neiljitsu]

You absolute legend. This saved me so much hassle.

[@airallen9411]

Bro i love you so much for this. Im a Machinist and ive been trying to get a headless thread out for like 2hrs. My shop doesnt have thread extractors, so i looked up your vid and it just saved my ass! Without your video, i wouldve had to scrap a $900 mutli inserted drill shank. Take my sub and like even if you never make another video

[@FaiiryTaiI]

Thank you good sir for this video. This video saved me. Had a broken bolt stuck in a valve cover. I managed to get it out. Thank you for your guidance. ✌️

[@murisec54]

Gracias por comentar le invito a visitar mi canal y compartir. kzbin.info/www/bejne/d3KWappma86sa6s saludos

[@psmith1349]

Hell, might as well give it a try. I ain't done nothing but screw it up so far.

[@DavidNovaa]

Nice one

[@tylerconley3433]

Exactly where I’m at lmao

[@jio7270]

Bro im changing the fucking brakes on my car and the caliper bolt head snaps off😐

[@wildside1951]

@@jio7270 Im trying to change my wheel cylinder and the T8 Torx bolt got really rounded cause I wasn't using the right size like an idiot then I tried using other types of sockets now im fucked. Beatin the shit out of it with a punch

[@jio7270]

@@wildside1951 see if its a torx head, go up a size or two, in your case a t10 would probably be best, but put the bit on the head roughly in the same pattern and beat the hell out of it until you fit the bit in there, that usually helps me undo a stripped torx screw

[@bnrz28]

Great vid and very informative. I had a similar situation with an exhaust bolt. What helped me was using a left hand drill bit. It hollowed out the hole as well as loosing it up. As soon as I put the easy out in the bolt it was loose enough to loosen by hand .

[@Talha1396]

This works like a charm! Just extracted two snapped manifold studs from my RB25DET head!

[@ELEVOPR]

OMG you came so close to fooking up your inner threads, Thank God you didn't or this would of been another video. Good stuff, Thanks for sharing.

[@snipezgreased6952]

Best video on KZbin for this.Straight to the point and also have good music

[@chuckford4393]

What is the song I like the music also

[@mr.x8391]

Simple dude with a simple toolbox getting it done. 👍

[@murisec54]

kzbin.info/www/bejne/a3_IqaCglrZ4nZo Le invito a ver y compartir. SALUDOS

[@luisbuenrrostro4529]

Thanks! Just saved me so much work. Didnt even know that we could use those bits on a ratchet. Thanks

[@murisec54]

Gracias por comentar! Si le gusta la mecànica le invito a visitar mi canal. SALUDOS

[@ArZer]

Saved me from catastrophe . Thank you so much.

[@ernestinebass4371]

Cool! By using this method I should be able to drive the broken bolts that held my ATV's skid plate to the frame out by reversing direction and actually driving them deeper in until they come out the other side.

[@rogerdouglas6405]

used this on spark plugs works a treat, saves loads time

[@michelesportelli9021]

Very good, the best and simply solution that j've saw just until now.

[@murisec54]

kzbin.info/www/bejne/mpDSmauHiZJgn8U Le invito a ver. Saludos

[@mikelee2419]

Thanks for this video!!!! I bought a ez out kit and it couldn’t get the bolt out but I used your method with a torx bit and it worked out better thanks again for the video 👌👌👌👍👍👍👍👍👍🙌🙌🙌🙌🙌🙌

[@EXPENDABLE50]

You are a life saver. This was the cheapest most effective method.

[@SoundLabMusic]

Thank you worked a treat, saved me from a massive mess

[@alaspablo4307]

I did it and it work. Thank you for this video. Very helpful

[@ibgeorgeb]

Wow! I’m going to try this method. Thank you. 👌🏾

[@josephguzman2375]

Right on brother good hack. Use this on my John Deere lawnmower and it came out just perfect didn’t even have to go buy a kit thank you brother!!!👍😎

[@murisec54]

thanks for comment If you like mechanics, I invite you to visit my channel kzbin.info/door/PP14v9RHOnCif52XqhGZ0gvideos

[@josephguzman2375]

I will brother thanks for the info stay safe

[@Moctify]

Got a new sub cuz I just came across this problem 😂😂

[@MuslimTours]

Videos like these is why i love youtube

[@murisec54]

Thanks for commenting, I invite you to visit my channel and see. Cómo sacar extraer un tornillo perno roto partido en lugar difícil. SALUDOS

[@timyong6152]

Getting broken bolts out is so satisfying

[@iamGrowing]

This worked for me perfectly. I used a smaller size drill bit and a smaller size torx.

[@spirodrossos955]

very helpful!!! i have a broken pcv valve and the thread part is in the valve cover hole gonna try with torx bits

[@SpelunkaTV]

Thank you so much, im from Brazil It worked

[@JAWBR3AKER79]

Thanks brother this helped me. Easy out wasn’t working for me. I’m so happy 😁🤙

[@maikolim37]

Excellent video! Thanks!

[@traceymillington1949]

I have a bleed valve snapped off in the caliper. Most videos say weld a nut on the end. I can't weld so hopefully this approach will work. Thanks for the vid

[@murisec54]

enter my channel you can find the solution

[@mkai8978]

Same situation happen to me now. How about yours? Can you extract the snapped screw?

[@kkkalvarez5137]

Lol.... happened to me too..... i said to hell with that and bought a new caliper instead.

[@taterthot1184]

Happened to me a while back we fixed it by plugging it with a nail lol

[@naijakem]

Thank you for posting. Going to give this a try.

[@neshifuturo]

I did this method not even seen this video, works well

[@MrAssassinash]

so satisfying to watch it unscrew

[@dannylawson6080]

I going trying it but slightly smaller broken bolt. That one thing I dislike when tightening a Bolt it seems not to be tightening but all the of a sudden u hear a Tink.

[@MPjustaman]

Nice.I definitely feel better just knowing some one else had success.

[@123rickdicky]

Worked like a charm! Thx sooo much!!🙏🏽🙏🏽

[@murisec54]

thank you for your comment I invite you to see and share: kzbin.info/www/bejne/a3_IqaCglrZ4nZo I'm from Catalonia, I like to share my little experiences, if you like enter between channels, you will see funny situations REGARDS

[@4leafmetal]

That was very satisfying to watch.

[@learnandteach.108]

Thats awesome, I was figuring out how to deal with such bolt. Thanks 👍

[@yousufmusthaneer9738]

Mine is small bolt sand I guess I can't drill its like ,,8 mm Dia bolt in KTM ',s oil filter side cover

[@learnandteach.108]

@@yousufmusthaneer9738 Do as he did, use 3mm and then 4mm, and don't forget to use lubricant before final step of removal.

[@Johnwilliams-yi9xc]

I thought I've seen it all ,good one.

[@arai6147]

mine hasnt broken in a flat manner. gonna try this anyway. good vid

[@johnny_nico]

You just saved me time, aggravation and money... Worked like a charm, thank you!

[@murisec54]

kzbin.info/www/bejne/d3KWappma86sa6s Thanks for comment. I invite you to see my videos share them. Greetings

[@VitiatedsHOWTO]

This video shows a good reason to own a torque wrench

[@omarsalamah2359]

well done. Fantastic work.

[@diamondharris4963]

It work perfect, thanks and I did subscribe to your channel.

[@Bossmobbin88]

Man listen you just saved me so much money bro 😂 thank you for that hack 🙏 🙌

[@WitcherDAD]

yes, I was doing that way 20 years ago before came out first extractors on the market :)

[@nekrasovnikolay2883]

Yes, man! Many tools come to make working easier. In 2000 I was working as a mechanic and did it same way. Now I'm saling car repair tools including screw extraclors. kzbin.info/www/bejne/Y3qpenqtj8ieqpI The only problem of TORX, if finally it will get broken inside hole it will be double trouble to extract it. So, doing this way should be very carefull with the torque you use for unscrewing.

[@rickydakin4737]

Thanks man helped a lot had to use a different bit but same idea

[@EduVentiladores]

Excellent video

[@Quasicrystal37]

Best part about this technique is that it can be applied to left and right-handed bolts.

[@alanbrandywine8356]

No no no. Must use left turn drill. I have had them spin out before using easyout. A right turn drill drives in further.

[@adekunleogunlana4380]

I tried it and it work as described, awesome 😎

[@Bonerite]

Hell yes this video saved me big hubk of time and money. 66 Dollars to be exact. Bless

[@marclopez2800]

Genius. I just removed a stripped flat head screw out of a 60amp breaker

[@AntonioCarlos-jt1yv]

valeu muito a dica, retirei o parafuso com muitissima facilidade, parabens e muito obrigado

[@meshimangi6824]

your method is much better, i think. I will try using it. thanks

[@jimmymifsud8353]

Yes it worked first go ! Thankyou !

[@dannymarrel3776]

So cool. Now I know I'm not the only one who ends up with a off center hole.

[@fullthrottleproductions1449]

Better then the torques bit braking in with the stud now I can't drill it

[@billdyer8431]

I used this method with limited success using an impact rated T30 bit. While trying to remove one broken stud which was below the surface, I managed to snap off the end of the bit. I just happened to have a 7mm diamond core bit handy (about $8). While time consuming, I was able to drill and expose enough of the broken bit to remove it. Hope someone finds this rescue tip helpful.

[@edgufler1122]

Thank you for the music video

[@mastergarza2878]

Finally what I was looking for but got no dam drill damit

[@brennenhammer2415]

Ommggg fr

[@ethanphillips45]

Any specific metal bits you like using

[@chassdesk]

Worked great cheers 🍻

[@Bjs20247]

Very useful. Nice. Very infomational.👍

[@DanielMorales-lx2kh]

Good video friend, greetings from Mexico WEY

[@murisec54]

Grácias por su comentario! Saludos

[@NuclearShot]

Worked me for, thank you so much!

[@murisec54]

kzbin.info/www/bejne/d3KWappma86sa6s gracias por su comentario, le invito a ver i compartir SALUDOS

[@bigrob351]

Awesome...quick and to the Point

[@murisec54]

Thank you for your comment, if you like the mechanics, I invite you to visit my channel and if it convinces you, I encourage you to subscribe. Greetings from Catalonia

[@bruteforce6570]

Thanks man your video helped me an my brother a lot 👏👏👏you are awesome 👏👏👏

[@murisec54]

kzbin.info/www/bejne/d3KWappma86sa6s Saludos Gracias

[@bahtjarkarpuzi9846]

Thank you Mr.!

[@joshuamoore1091]

Going to try this tomorrow

[@armanchannel84]

Wow good tutorial👍

[@juanmanuelfrancobyrne]

Gracias por este vídeo, resolví lo de un perno roto igual al del vídeo y salió fácil

[@murisec54]

Gracias por el comentario. Le invito a visitar mi canal y suscribirse. SALUDOS

[@mikegrant8490]

4mm followed by a T-27 Torx. Got it.

[@murisec54]

kzbin.info/www/bejne/d3KWappma86sa6s

[@danceswithaardvarks3284]

That looks like it will work for the problem I have. Thanks.

[@danceswithaardvarks3284]

Lucked out. The screw was not in a blind hole and came out when drilled. Thanks for tip anyways

[@murisec54]

Me alegro tuviera poca dificultad. Gracias por su comentario. Le invito a visitar mi canal. SALUDOS

[@chrisspears4302]

Thanks brother you saved me money and time

[@lazydayhohum]

I need to fix my car but I can't stop grooving to the tune man !

[@ricardovelez958]

Lol

[@Amtz900]

Good job thank you for sharing

[@ibcrenacimiento7478]

Excelente idea! Gracias!

[@jrondyer1049]

I am curious as to why threads that clean would have caused a bolt to snap from extraction?

[@vishnucp476]

Is it possible to remove broken glow plug by this method??

[@driver4818]

Best video Ever! Worked 4 me!

[@joenucci5369]

HOLY $HIT I LOVE YOU!!! THIS LITERALLY SAVED MY ASS.

[@murisec54]

kzbin.info/www/bejne/a3_IqaCglrZ4nZo Le invito a ver y compartir. GRACIAS Y SALUDOS desde Catalonia

[@karinaferreira6663]

Não tô conseguindo tirar parafusos do compressor de ar direto ele nunca foi aberto e nunca teve manutenção e eu já espanei todos os parafusos de tanto tentar tirar porque eles estão bem emperrados que nem se me chamou. .alguém me da um dica que funciona

[@jeanfrancoislebon3378]

Bonjour et merci énormément sa ma sauvé la vie vraiment le top vous êtes un génie bonne continuation merci encore

[@kizilkurt4862]

Good tactik dude

[@ricardovelez958]

I will try this on my brake caliper bolt that broke on my knuckle 😢 thank you very much

[@AndrewFord]

Lol, cutting it close but looks like good method on the cheap too

[@foxjason6893]

DANKE DU BIST DER KING HAT GEHOLFEN SEHR GEILE ZAUBER TRICK IT S MAGIC JEAH YOU ARE THE KING

[@Photostudioww]

Great idea 👍

[@raycrook4802]

🙂 I can use this! THANKS!

[@rubenr.otanez8037]

Excelente idea 💡 👍 😍

[@sniperpaintcorrection6790]

How do u get it out if the head it alread broke and the threads are in there flush. My rotor screw is broken into the wheel hub and I can’t put a new screw to line everything up. And now the brake caliper is rubbin I’m rotor. This screw is very tiny