WYBOT A1 Cordless Robotic Pool Cleaner Unboxing and Review

This is the Wybot A1 Cordless Robotic Pool Cleaner. It has 4 cleaning modes and lasts up to 120 minutes. It cleans the floor of inground and above-ground pools.
Buy it here: (Affiliate Links)
► Wybot A1 - amzn.to/4a6aDbv
🛒 Amazon Shop - www.amazon.com...
🍻 Buy Me a Coffee - www.buymeacoff...
📧Business Inquiries - [e-mail]
👇🏻SUBSCRIBE HERE
/ @diyreid
𝐖𝐚𝐧𝐭 𝐭𝐨 𝐬𝐞𝐞 𝐦𝐨𝐫𝐞 𝐜𝐨𝐧𝐭𝐞𝐧𝐭 𝐥𝐢𝐤𝐞 𝐭𝐡𝐢𝐬...?
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
👍 Like the video (it helps a ton!)
💬 Comment below to share your opinion!
🔗 Share the video with anyone you think might help :)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
📱Stay Connected with DIY Reid On Social Media :
►Instagram: / thediyreid
►Twitter: / thediyreid
My Gear: (Affiliate Links)
► Big Camera - amzn.to/2wJZUnj
► Small Camera - amzn.to/2Q46iha
► Wide Angle Lens - amzn.to/2oMlGCN
► Rode Microphone - amzn.to/2PDPqNu
► Studio Lights - amzn.to/2zsVmDu
► Voice Over Mic - amzn.to/2QYbN1C
** Links to Amazon are affiliate links **
This video is provided for informational purposes only. The information contained in this video is intended to provide general guidance for this DIY project. As with any DIY project, there is the potential for harm to yourself or others and because tools, products, materials, techniques, building codes and local regulations are continually changing, DIY Reid assumes no responsibility for the accuracy of the information contained therein and disclaims any liability for omissions, errors, or the outcome of any project. It is your responsibility to ensure compliance with all applicable laws, rules, codes, and regulations for any project. You must always take proper safety precautions and exercise caution when taking on any project. If there is any question or doubt in regards to any element of a project, please consult a licensed professional.

[@Jpersom11]

Yo gotta be the chillest guy to give the most useful info bro Tysm for this ❤❤❤

[@DIYReid]

Thanks for the kind words

[@sistabrownkjd]

and i would also like to know what the purpose of the screw lol

[@davidhazen2394]

Does the screw have a purpose?

[@dancindan4846]

Does the screw have a purpose

[@HeidiFuller-f5k]

I'm wondering the same thing

[@sherijones4699]

You didn't show how to get it out of the pool and mine came with a tiny screw and cap. Guess I will have to see if it is in the book

[@DIYReid]

You use the hook. I explained that the hook attaches to your pool cleaner pole.

[@arminius301]

excellent video, just ordered this cleaner in hopes it will take this task off my shoulders efficiently and will last for years. That "OOL" sign is genius btw, I'll have to find one. Thanks for putting the time and effort into making this video!

[@DIYReid]

It’ll help for sure. One of my good friends growing up had this sign and I liked it so much I bought it for my mother in laws pool 30 years later.

[@brendaamerica2926]

Just got mine. Stops in the middle of the pool. Totally junk

[@Queen_Baddie22]

So I just purchased mine and I used it for the first time tonight I placed Cotton balls in it and skimmer socks and it picked up quite a bit. The issue is it keeps stopping and when I look at the top of the robot, it’s blinking blue lights, and when I look at the booklet, it indicates that it’s under working, how do we fix this?

[@p234oiuy]

How do you adjust the front/rear steering wheels? Manual says to set them at A-B for a round pool?

[@DeeBoutot-j5b]

How do you adjust the steering wheels for a round pool?

[@1realtruthrightnow742]

Mine worked 2 times, now it's dead. When turned on moves for a minute or two and then just sits there. Full battery, smooth bottom no wrinkles' just dies. This is so frustrating. When it worked, it was awesome, but these things just die too quick for the money that is spent. Just got off the phone with Amazon, they are sending my 3rd replacement. So sick of thiss

[@emdeejay7432]

I just put mine in and it runs for 20 seconds then stops and just sits there motionless. Then i took it out again turned it off and on put it in. Same thing. Left it there for 10 minutes and it just sat there.

[@Queen_Baddie22]

Mine is doing the same thing, but it’s blinking flashing blue lights, and when I look at the booklet, it means that it’s under working, which I don’t exactly know what it means

[@Chris0994]

Mine does the same as well. I have no idea what needs to be done to fix it.

[@Queen_Baddie22]

@@Chris0994 me either … have you tried reaching out to the company ? I plan too

[@Chris0994]

@@Queen_Baddie22 I’m gonna try and pressure wash the filter and screen on the inside. Maybe i put it back together wrong or something but I’m gonna try myself first at least. If you do let me know what they say to you

[@MaeowGames]

i am having the same issue. the robot is fully charged and turned on, and it tries to go forward and backwards but it sits there doing nothing... i do not know what else to do. i've took it apart countless times reassuring the filter and everything is in correctly, i've changed the wheel position to round pool, etc.

[@MichelleMoe86]

Does any one know what it means when all the lights are flashing green? The manual doesn’t specify

[@davemac8293]

Just got ours in, named it scuba Steve. I have a round pool and want to adjust the wheels, but am unable to locate a video on how to do so

[@skcollins340]

If you found the info please share.

[@jamesbloodworth4303]

It’s in the manual tells u which tabs to set depending on ur shape.

[@_Bizzo]

3rd comment regarding and wondering about that god forsaken screw

[@sistabrownkjd]

Mine keeps stoping and i have to push it along

[@1realtruthrightnow742]

Your lucky, mine just stops and never retstarts. Mine worked 2 times, now it's dead. When turned on moves for a minute or two and then just sits there. Full battery, smooth bottom no wrinkles' just dies. This is so frustrating. When it worked, it was awesome, but these things just die too quick for the money that is spent. Just got off the phone with Amazon, they are sending my 3rd replacement. So sick of thiss

[@Queen_Baddie22]

Mine keeps stopping too, but it’s blinking flashing blue lights and when I look at the booklet, it means it’s under working. I don’t know how exactly to fix that.