7530 Blower Fans

[@chrismusson8765]

Hey wes . Its chris up in alberta canada. I watch your chamnel all the time . I have a 7130 with an IVT. Its a great loader and baling tractor. The blower motors quit . I just happened upon your video of you fixing the 7530. It really helped me know what to do. Try not to stress yourself on trivial things. The stress slowly kills us. I was just like you and it was killing me. It was hard to do at first but now i only stress about family matters. I feel 100% better. Hope you and your whole family are doing great and you have a great harvest. Stay safe my friend.

[@photocontrol]

Keeping the sprayer tank as a nurse tank would be a good idea. Sorry to hear about your grandmother, lost mine as well a few months ago.

[@leestadnyk5573]

condolences on your grandmother. it doesn't matter how long you have them it never is long enough

[@Panhead49EL]

High-pitched Wes is my new favorite character.

[@daviniahutton8176]

Our condolences🙏 to your family first and formost , wes excellent video always something new to show us and we all learn something new everyday 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿 take care all

[@m9ovich785]

Thanks Wes. Please accept My Sincere Condolences, Loosing Family is Rough. Mike M.

[@TDS4x4]

Sorry for your loss, my condolences to you and your family !!

[@HireFarms]

Sorry for your loss, Wesley!

[@archiegillard1805]

Condolences to you and your family on the loss of a loved one.

[@daledurbin2354]

Condolences and sorry to hear of your Grandmothers passing. Mine taught ma a lot, she died in 1960, still miss her. Today most tools like most everything else are made in very few factories, name brands are stamped on, prices follow brands. 60+ years ago I purchased a set of Craftsman at Sears, still have all, still using, 20+ years ago I was out, had a dead battery, needed tools, bought a set at Sam's, lost the 5/16th socket, another battery problem, still have use all. I have some Snap On, some Mac, a few Huskey, a pile of Stanley, and multiple Harbor Freight, use them all, they all bust knuckles. .

[@8950MAGNUM]

sorry for your loss sending thoughts and prayers

[@450captain]

Condolences to you and your family Wes !

[@LilLeon97]

I lost my grandma just after Christmas Wes. Prayers to you and your family.

[@HowFarmsWork]

Sorry to hear about your Grandma Wes!

[@onelonleyfarmer]

My last grandparent

[@markgamble8377]

Can relate to that aggravation.but have to admit I chuckled a lot Watching the sped up fan repair. Good ur gram lived to 90 some. I'm sure she is very proud of her family.

[@SwimminThelake]

The fast forward part of the video was really entertaining! I'm sorry to hear about your Grandmother, Wes!

[@chrishankins905]

I’m sorry about your grandma man. That kind of stuff is never easy even when it’s expected it still sucks

[@Rcod2013]

Hi from Australia Wes. I had same thing with the Ac blower in my fendt. Found manufacturer of it and called their Australia office. Got really helpful man. Told him model number. Looked it up. This is what he told me. Fendt paid to make the dies of the unit and the manufacturer was paid to make a run of blowers. When finished fendt took the dies so no more could be made. The rep said if it was one of their standard blowers it would be about $600 So I had to go to fendt. They charged nearly $1900. How’s that for profiteering.

[@AntonyMB]

Condolences for you grandmother, may she RIP.

[@garyjohnson4458]

Very sorry for your loss

[@ginggur17]

I love it when ya get on a soap box rant pal, god love ya Wes. 👍👍🤣🤜🤛🇬🇧🇺🇸

[@petersenpartsled2985]

For future reference, heavy duty, high efficiency blower motors from APair for that tractor are $135 and move more air than Deere motors.

[@AlextheDutchDairyfarmer]

👍👍 Sorry for your loss

[@chrismorris308]

Condolences on your Grandma Wes!

[@JACKATTACKED]

Sorry for your loss Wes.

[@deno2002]

Sorry for your loss😭

[@jvin248]

"Strap On Tools" Lol, it's in every market .... Brand Marketing makes a lot of money for all kinds of companies. Farm I grew up on had all the equipment colors except JD. "You can buy a better tractor, but you can't pay more" was a fun quote I heard.

[@mortalman01]

Nice rant about the fans. Sorry to hear of your great grandmas departure.

[@duggydo]

Sorry to hear about your grandma Wes. My condolences to you.

[@waynejones5239]

Sorry to hear about that

[@thedude2601]

A little surprised that he's using a chinese phone manufactured with child labor. Always interesting and informative, thanks!

[@lightning9279]

Big Bud is making a new tractor. They are making it simple. With the right to repair going out the window, they believe there is a market for a uncomplicated tractors that the public will be allowed to work on. Smart move. Can only imagine JD, Case etc will try to shut them down. The first tractor will be coming out this fall.

[@brandonwood1397]

The engine still going to have to be electronically controlled with emissions I wouldn't call it simple

[@danw6014]

I thought Deere lost that case.

[@lightning9279]

@@brandonwood1397 Owners will not be locked out like they are with some manufactures. You will be able to access the firmware.

[@robbsmith1560]

Wish it could go back to the simpler days when you could fix equipment yourself with a crescent wrench and a screwdriver.

[@lilo2469]

Be interesting to see what happens

[@LtColDaddy71]

It’s not like the old days where you could open up the windows. You fix it, or fry. I was joking with an old timer just now at brunch after church. He wanted to know what I was watching on my phone. His reply was “we didn’t know what cabs were, didn’t need windows.” OLD SCHOOL!

[@Ollie603]

Well, nothings stopping you removing the windows if you really wanna go back to the old days

[@waynejones5239]

I have ran tractors without a cab and cab with out heat and air-conditioning minus thirty degrees below 5miles one way put bales that were scatter around the field and drove back no cab I would much prefer to do that with a cab and heat because I couldn't hardly get off the tractor after I set them all out and got back to the house

[@thedeahtkiller3]

Sorry for your loss. Rip old women! She got an long life atleast.

[@ashlandgunclub1000]

Sorry for your loss

[@hillbillyhicks8102]

Man Wess I just love your commentary just love it. Had me rolling splitting a gut. Even if we have to listen to it sped up so you don't get in trouble with you tube. Keep it up

[@68diggerman]

Sorry to hear about grandmother Wes .condolences to you anď panda family maybe rest in peace RIP

[@SuperScooby70]

Morning Wes. I know you like Milwaukee electric tools so if you're inclined you should check out the long reach electric ratchet. Seems that tool would have came in super handy for the fan replacement job. Sorry to hear about your grandmother. Stay safe out there and keep the awesome videos coming.

[@robinwolf3226]

Best wishes to you and your Family. Sorry about your loss :(

[@Joey966]

Sorry to hear about your Grandmother Wes.

[@WilliamTMusil]

Hiya Wes. Sorry for your loss.

[@mikenicholson2548]

My condolences Wes

[@fleetmanager3988]

I like Bosch parts too, but..I ride a Ducati and love my Gaggia espresso machine..both of which are made in Italy, cant speak to parts for JD as I run Massey Ferguson 3660. Enjoy your vids from here in southern Missouri. The sped of portion I can totally relate...fun times

[@kevb9578]

Thanks gotta do this on my 7430. Hauls shit all winter. . Blower starts but then shuts down .

[@garymorel6621]

Sorry for your loss.

[@MustangsTrainsMowers]

Onelonelyfarmer I’m sorry for your loss for your grandmother passing away.

[@Dave-ll6ei]

Your bitch session in fast forward was hilarious.

[@stevewhite7875]

SORRY for your loss Wes :( :(

[@ginggur17]

Sending prayers and thoughts to you and your family pal. 🙏🙏🙏🙏🙏🙏🙏🙏🙏🇬🇧🇺🇸

[@scottbrune5744]

Your are a very good mechanic and not afraid to tackle anything. I have several different kinds of tool . As long as they get the job done what dose it matter. Keep up all the great videos!👍

[@letzrockitrite8469]

Open a tab: When you see “open a tab” in the comments on a channel it means to open a tab on your browser, go to youtube, go to this channel… click play… on the list on the right while the vid is playing is a suggested playlist usually headed up with a “mix” of this channels videos… click on that video and turn off the volume so it runs in the background without the sound from the channel interfering with what you listen to on a different tab… at let it run ! … I’ll do it on a couple tabs at a time for channels I believe in… Channels like this one where they are lovers of America… the free one and aren’t afraid to say it and their content is worthy of admiration and teaches me something that’s fundamental in the list of things to know and value……….. that’s all…. No gimmick… just a hope that the views increase the subscribers for this channel ! … take care of your family ... and open a tab for the Pandy family ya'll

[@onelonleyfarmer]

oh its ok I don't do it for the views and all. I do it because I like posting my life on here. you see my young son William will be able to go to KZbin and see the life ive lived before and during his time here on the computer. he doesn't know my other children other than Tim because they don't talk to me anymore. but the truth is on KZbin that I was and always was a loving devoted father to them and even though they forgot he will be able to see it. anyway that's why I do KZbin.

[@canvids1]

Wes when I started driving trucks for a living at the railway we had a heater but no AC. open your two windows for AC. Where you had to work to put that new motor in! just awe-full.

[@johnkeets8333]

So for your loss and heartbreak to you and your family, we will be thinking of you at this sad time. That is the thing if you want a fantastic tractor 🚜 that can keep on going then you need to spend money on filters and other parts to keep it up and running and that's a catch-22 unless you can find great parts put cheaper Inc hope you do find someone that can help you great video. I Hope Tressa will feel better soon.

[@57fitter]

Sorry to hear about Gram, Wes. Nurse tank IS a good idea. Good call to whoever thought of it!

[@demo2x]

Sorry to hear about your Grandma Wes

[@mikenicholson2548]

Wes, I started buying the ICON from Harbor Freight and have used the hell out of them. Great luck with them.

[@liamkelly8684]

Spal are great fans put them in my 6620 a good few years ago and there still going strong a lot cheaper than the Bosch fans with the green sticker that makes them 10 times more valuable

[@jamesoneill3475]

Wes. Ive watced almost every video youve made from the start but Listening to you complain and moan in high speed is about the funniest thing I've heard in a while... keep up the videos.

[@Boot_185]

Gearwrench is the only ratcheting wrenches I own. The other tools I own are craftsman and hobo freight pittsburgh. I have never broke a hobo freight tool yet.

[@sebastianw1663]

Last year i replaced one of the blower motors in our 6200. I got one of ebay, it was a Bosch 0130 115 604. Paid just short of 90 euro for it. Fit right in. Was exactly like the old bosch one that was in it.

[@lafermedu14etlagriculteurs29]

we changed the fans of our 6830, we had found bosh cheaper and it still works now. our 7530 has the origins.

[@RazerBang]

yesss a repair video finally these are the best.

[@ollie-lk5dx]

Sorry to hear about your grandmother. I agree with you on tools I have a few proto, SK and mostly craftsman and gear wrench and for the farmer they are well worth the money. My brother has many snap on and I don't like them, they have a sharper edge and it bites into your hand.

[@onelonleyfarmer]

that's why you have to buy the fancy gloves to use them.

[@ronwrob2819]

when tim complanes, thats ok,when wife complanes we will get right on it

[@craig.s4324]

Best wishes to you and your family Wes!!....

[@bradleyfitkin4141]

My condolences to you and your family!

[@aoverhage5181764]

May not be worth it, but I wonder if cleaning the com bars on the blower motor would fix them up. Usually that does it if they are brushed motors.

[@edwardmyers3277]

My condolences on your Grandmother's passing, Wesley.

[@katmandu8208]

👍🏼🍻

[@terryaldridge5311]

Prayers for the lose of your Grandmother

[@stephenheyes4324]

In UK blower motors are £91 huge mark up in USA

[@brandonhenke7116]

Brandon Henke. I just wanted tell I'm sorry to hear about your grandma 😔.

[@ciufo25]

You need a milwaukee m12 ratchet they are mint

[@brendanhough289]

Did u not replace those motors a few years ago?

[@Lucky4wd4840]

Wes, condolences for loosing your Grandmother may she RIP

[@huntm7592]

Ordered a Belt clutch that goes on the transmission for a John Deere gator 2x4 ts the other day. $799. We have 9 of them to maintain and a few tractor I feel your pain buying parts from John Deere.

[@danw6014]

I replaced one on my 6 wheeled diesel gator a couple of years ago. It was about $600 then. Ain't inflation great.

[@combatmedic1980]

Wes BTW Idean Trion make all stainless steel worm drive clamps, the band is 300 stainless and the worm is 305 stainless

[@randywilliams787]

My condolences

[@newyorkfarmer146]

Wes I couldn't Agree with you more i work for a farm dealership and i have a mixture of stuff ,I do have a lot of Snap-On stuff but I have a lot of Pittsburgh and craftsman stuff as well it all does the job it was intended to do, I have cheap Pittsburgh wrenches because if i need to cut them up I'm not cutting up a 200$ wrench I'm cutting a 10$ wrench and feel just fine about modifying my 10$ investment suits me fine rather than cutting up a 200$ investment , a lot of people want to pay for a name

[@davemork3538]

No snow and green grass?

[@donald1056]

Looks like you need some front tires on the 7530 - real bad - sorry to hear about your grandma

[@jerrynibarger9148]

Mornin' Sir.

[@eddief3326]

I am Sorry for your and yours familys loss

[@zftransmax1]

Sorry for the loss of you're grandmother

[@danw6014]

Your not kidding about prices. My stuff is old and small. I just bought an Oliver Super 77 diesel as an extra tractor for my PTO generator. I figured it would run that without using much fuel. It uses two oil filters at $40 a piece. Sorry about your grandma. After spending two weeks watching my dad die all I can say is I hope it was sudden.

[@BricksVideo]

I will say HAHAHAHA, I love the sped up video, for the flamboyant audio! LOL

[@johnbathgate904]

The 75 doesn't have the atmospheric pressure fan (the blower in the floor of the 81)?

[@billkrumenauer2492]

Ap air makes all this stuff, and it's a lot cheaper, and they are excellent to deal with.

[@Greg_Gatsby]

Good content. 👍

[@donaldkoon3427]

they do you have to send it to them and they will send you a new one and i have snap on tools but most of my tools are cheap ones and i have paid for my box and my tools are all paid off and im only 29 going on 30

[@johnmushko7555]

You might make more working for John Deere than farming! 😊

[@israelmathes6268]

I not afraid to admit to using Harbor Freight tools. Shoot if you break them they will give you another and people don't really steal Pittsburgh tools LOL

[@dawn20]

Try Icon tools from harbor freight I would put them up against snap on any day😊

[@MustangsTrainsMowers]

And isn’t there aftermarket parts made for John Deere and other tractors?

[@alanmcclorey8914]

sorry about your Grandmother

[@timstevens2866]

Cheaper than a new tractor

[@robertvetter6139]

I think you need to change your channel from one lonely farmer to “One Angry Farmer “!

[@timstevens2866]

If it makes U feel any better them engineers that put that together on paper get paid more than U and me put together

[@timmywarren2349]

Very good Video 👍

[@philipstreechon4523]

Hi I have 6 new John deer 24 volt blower motors any interest.