Why Krone Again?

[@TheRestOfTheStory]

Thank You! Thats exactly what we've been saying the last 2 months, "The Harvest Year From Hell"

[@lrwr-fi5zg]

Travis its been a nice harvest in Indiana not very much rain

[@hturbo1007]

You're telling me,we finally got finished with corn today and at the last acre I got stuck, got myself out then started going again I blew a tire. I was very happy to see the last rows of corn going into the machine.

[@danielsweeney6742]

Not a hay farmer but, if I was I'd be thinking about a Krone. Someone who knows a baler does an ad for free that is pretty good. Krone should be nice and give you the 1500 dollar repair pack. That would be cheap payment for a free ad. I hope it drys out for you! But It does not look like it.

[@s.pursell8901]

20 miles south of us was Washington's crossing blood bath. The last 5 months have been Hunderton County's mudd bath. Lol. Keep the great clips coming.

[@markmortensen4341]

I like how you explain why you like or don't like a baler. So much of the time people try to tell you that they're baler is the best but without saying why or comparing it to another machine. If I'm going to listen to somebody say how good they're machine is I wanna hear facts like you explained. Thanks for sharing your thoughts and video!!

[@kbdfarms6355]

100% correct about the Massey baler! When my krone broke down, all the dealer had was a used Massey so I didn’t have a choice. The krone is a lot more machine and it definitely shows going across the field. Can’t push the massey like that or start slipping clutches.

[@martinbenton742]

I've never seen nor heard of Krone until I started watching your videos. Low and behold, one has shown up 40 miles west of us at a used farm equipment lot. I couldn't imagine how that would have been almost 40 years ago when we had 1000 acres of hay ground. We mowed, raked, pushed up, and stacked in a hay cage. We would start on the 5th of July and it would be October by the time we had the stacks in the hay yards. Naturally we had other things going on at the ranch so moving stacks wasn't as important as getting it down and stacked.

[@YouTube_Kundendienst]

I know a friend of mine working for krone in Germany and he told me that the owner of the company is all about durability and customer service, they actually make a really small amount of profit on this machines but he told me that the owner is not about profit but for making the best products possible. I also own a lot of Krone equipment and would never change that again.

[@hedydd2]

Krone is a family company that mainly makes road truck trailers. The agricultural machinery side is a result of their enthusiasm for that side of the business. While they do make some superb equipment, not all of it is the best. Their round balers, both fixed and variable chamber do not have stellar reputations and I once owned a twin rotor hay rake that had electric motors to adjust wheel height and electrics to fold it through a control box; things that really aren't needed on a hay rake. On top of which its frame was just not strong enough and cracked badly, needing a lot of welding and gussets added. Sold it and got a Kuhn which is a far better rake. There were a few Big Packs around here in West Wales a decade or more ago, but they do seem to have become fewer in number as time goes on. Claas were very strong in big balers here at one time also. I should say that hay and silage is the biggest use around here, whereas into the arable areas of England it is more for straw and MF dominate the market in those areas. Here, I still think Claas are the biggest sellers with McHale dominating the round baler market. Claas went through a very long cost-cutting stage with their round balers which gave a lot of trouble and they basically destroyed the market for their balers which once dominated.

[@YouTube_Kundendienst]

@@hedydd2 I got two Big X 680, 3 Big Pack 1290 HDP and 2 Comprima the only problem I had was with one of the small balers since the novogrip broke I also have some McHales which I use, as small baler I would prefer tha McHale that´s right.

[@EinachserLS]

@@hedydd2 True, Krone rakes were really bad a while back. They also had a horrible weakpoint in the tine arms (or whatever those are called) where they put a pin right through the arm to fix it to the rotor and they will always break there so you have to go back across the field to look for the arm, lest it messes up your self loading wagon or baler. But they seem to have improved nowadays. Also McHale seems to have completely cornered the round baler market here in this region of north western Germany over the last couple of years.

[@hedydd2]

@@KZbin_Kundendienst A farm about two miles down the road from me has a Comprina variable chamber combination baler/wrapper. The only such Krone machine the dealer for this area has sold. It seems to go well enough but has a small workload of less than 1000 bales annually. The Comprena seems to have a good reputation but not many have been sold around here. Perhaps it doesn't help that the dealer is also a New Holland and Lely/Welger dealer and up until this year has been pushing Welger. Now, of course, MF dealers have the Welger balers, so this year the NH dealer has been trying to sell more NH and Krone balers. Personally I don't like the idea of the rubber chain and slat design of the Comprina balers due to the almost inevitable day when a link breaks and shit happens. But that's just me being cautious. I have an old NH belt baler which is one of the worse decisions I ever made. Having said that, it has worked fine, with no failed bearings, over the last two years but has had a lot of issues over previous years.

[@hedydd2]

@@EinachserLS McHale sell really well here in Wales also. I was one of the first UK customers [but not THE first] to buy a McHale 991B bale wrapper back in 1993. I still have it and use it for about 200 bales a year, which is as many wrapped silage bales that I want to handle annually. Better if zero bales, but bales are always useful as a buffer when it's not worth opening a clamp.

[@stevelutzke9600]

Looks great Wes! Should have checked to see if they have an umbrella option to keep it dry. As the saying goes if it ain’t broke don’t fix it, you have had good luck with the Krone. I see no reason to make a change now. Stick with what works for you. I’m located in Wisconsin and expecting trucks to arrive from south oh here and was informed they are all running late due to the snowstorm. Could be coming your way...

[@peewee.3138]

And that is the only time that you will open the twine box without getting covered in dust! Great videos!

[@doctorevil7352]

That is a proven quality machine. Very nice, very well built. It has proven itself to be one of the best built and best operating machines, with less down time, than any other baler in its class on the market today.

[@JPilot2]

G'day, Wes! Sweet, my uncle having a 40 acre farm!! I'd be as anxious, as a nun in a cucumber patch! Love to come down south, with you Folks, and run The BiG Pack Baler (or) Balers! Thank you! Cheers! 😊🚜❤️✌🏼

[@Ham68229]

Wes, the one thing about Krone is, it's well designed, well built. It puts all others to shame as it should. Completely understand why you shop around, who wouldn't for those prices. However, as you said, you get what you pay for and with Krone, you're getting, (in my opinion), the best of the best. Messick's may have slightly dropped the ball on you when you first purchased by leaving the bale in the chamber but, they did make it up to you. I think you have a good dealership that's truly willing to help you and you're seeing them go that extra step. Hopefully, unless Krone starts messing up their design, you'll stay with Krone despite the high cost.

[@mikeysgarage3697]

Yet more bloody rain in East Yorkshire too. Was thinking back on what you've had to do to the older Krone, and other than the header you ran into a stump, the tyre that blew out, I think the only other things that you wouldn't expect to be replacing anyway like pick up tines, knotter rollers and stuff, was one or two needles? Anything other than that has lasted until the annual service.

[@AussieMusicRocks]

In my opinion, with the great run you've had out of the first Krone, you'd be a fool to buy anything else. Expensive, yeah, but it costs money to make money.

[@ISXCUMMINS565]

AussieMusicRocks .. Yes, AMEN on that👍

[@wantu2much]

Not just that but down time is lost money. Pay more for more up time and make more money.

[@BrotherJohn-mz4qe]

I agree Krone is the best hay equipment. I run a used Kuhn round baler 2190 and love it once I figure it out.

[@davidrowley8251]

About twine usage: On the BP 1290 HDP, making 8 foot long bales, every string around the bale, tied with a beginning and ending knot, uses about 20.3' of twine. Six full loops per bale, gets you to 122' of twine per bale. I believe Wes is using 4,000' rolls of twine, so the math says about 32+ bales of hay from every roll of twine. 3 upper strings and 3 lower strings come out of the twine box on each side. That is 12 strings feeding the upper and lower parts of the baler. Although Wes's baler has storage in the twine boxes for 32 rolls of twine (16 rolls per side), even after just reloading all the empty slots, you may have up to 12 lead rolls that are almost used up. It is expensive to just discard them, just because they are not full. So 32 roll total capacity, minus 12 rolls that may be close to used up, leaves you with only 20 full rolls right after a twine reload. So, at best, 20 full rolls x 32 bales per full roll, you are guaranteed to have enough twine ON YOUR BALER to make 640 bales, after a reload. BUT, on a twine box that holds 16 rolls maximum, and knowing that you use about twice as much twine per bale on the bottom string (13.5') versus the top string (6.83') most operators will setup 2 rolls to feed each top string and 3 rolls to feed each bottom string. 2 x3 top strings =6, 3 x3 bottom strings=9, 6+9=15. This leaves 1 slot in each twine box for spare twine rolls/tools/whatever. SO, in actual use, Let's do the math for a bottom string fed by 3 rolls, the lead roll may be nearly gone at time of reload, so it may have not much more than 2 full rolls remaining. 2 full rolls is 8,000 feet of twine, 13.5' will be used on this bottom string every time a bale is made... 8,000 / 13.5 = 592 bales can be made for this bottom string, guaranteed. The upper string will run out about the same time. You better plan to reload your twine boxes by the time you've made 592 bales. Sometimes a missed knot, or uncut knot can waste a lot of twine getting pulled out of the baler by a bale still connected to the baler, so watch for that. When doing big fields of straw, even if full of twine in the morning, Wes may have to reload before the days work is done.

[@patrickverkley323]

Looks good! I've been really impressed with all the equipment Krone puts out there. As you've said Wes, they are contently looking for ways to improve the functionality and durability of their equipment. It's a philosophy I think still partially applies to John Deere. They too seem to choose to add metal and strength to equipment as opposed to save weight and material.

[@muscletractorfan2441]

The Krone seems to be the way to go. I am impressed with the work I see you do with your Krone.

[@mikes47jeep]

hahah i love your weather forecast!! picking corn is almost impossible for us. the puddle at the top of our driveway hasn't dried out since may

[@cotontop3]

You made the right decision to go with a Krone again. Very well built equipment.

[@SlipShodBob]

It's like anything in life if it works well for you why change.

[@buffranchAB]

Hallelujah ! Pricey but I am trying to figure out how to acquire another one, Krone is in a totally different league from the competition

[@michaelmactavish1728]

@@buffranchAB it's $40,000 here at my kubota and case dealer in canada wich is cheaper then $215,000 or $230,000 wich balers shouldnt cost that much

[@787Earl]

My Dad always claimed quality is worth the price, junk is always over-priced.

[@canuckloyalist4681]

Couple of the big guys around here running Claas combines, one told me their parts "network" is a fluster cluck! You were smart buying the Krone!

[@hedydd2]

Oddly, in Europe, Claas combine parts backup is second to none. It is superb.

[@benjaminstockton3917]

Wes krone is a good machine they are expensive but if you want less headaches you haven't to spend the money thanks Wes for showing us these video's

[@danielalamo2075]

I've commented before on the fact that I've seen three Krone balers in one laser flat alfalfa field. It looked like NASCAR out there. I have never seen balers run so fast. Good luck with your new "toy" and good luck with the rain. Please send some rain to the central valley of California. We're behind again, but we did just get .7" .

[@davidrowley8251]

When you are doing a time sensitive operation like baling hay, with operations to be done before and after the baling, reliability and uptime is very important. If you remember the videos when the Krone baler pickup cruised into the hidden stump, under the windrow, Disassembling Damage kzbin.info/www/bejne/oZzKXpeCraaVf6c Repairing Damage kzbin.info/www/bejne/mZeygp2hhpKan5Y you should know a couple things: 1. The actual damage was half as bad as most expected, the machine is built rugged, yet made to be repaired. 2. The unusual parts needed to repair it, were there in a few days. 3. The repair went smoothly, no unusual tools were needed, no parts didn't fit right or were missing, no "the new pickup rotor is made different than the old one". 4. It pretty much went to work and kept working after the repair, it didn't limp around for a few days, as additional hidden damaged parts failed out. Wes has a good dealer in Messick's near him. When I bought a very used and abused machine, and had a few parts fail out, my Krone dealer in Kaukauna Wisconsin got the parts to me quickly, and they worked. Krone has good parts availability and dealer staff in the U.S.

[@Rooftopmatty]

Can completely agree with you when you say if you spend more money you get better quality, bought a new dump trailer for work and the price I paid for it I could have bought 2 of the cheaper brand for the price I paid for the one I chose to buy and I don’t regret it one bit at all, I knew if I got a cheap one I’d trash it in a a year or two

[@chasesblog]

We had really hot temps over the summer no rain then rained quite a bit the last couple months but we’re able to finally get our cotton out of the field and half the wheat in the other half will be in once I mow cotton stalks

[@jwoutdoors1451]

Been watching your vids for years wes. Never a dull moment with onelonelyfarmer

[@AlextheDutchDairyfarmer]

Why a Krone? Why not? I would start asking questions if didn't bought 1.

[@michaelmactavish1728]

my kubota and case dealer sells the krone 1290 hi speed balers for $40,000 here in canada

[@brianhanson9574]

My son is a ag engineering student at Iowa State, in the summer of 2016 he did a internship for John Deere and tested balers in Arizona, painted jd green on the outside and Kuhn orange inside.

[@mesh1248]

The Right decision with the Krone to bad you got rid of your heston with all the work you put into it with the little bales you made with it and it would been cool to see three balers go in the same field

[@claas6504]

Sir Bernard Krone, would probably enjoy watching this video!

[@johnnypopper-pc3ss]

🎶Krone again - naturally !🎶

[@fun2drive107]

Anything that operates well and doesn't break down is so worth it. I have never been unhappy going first class because there is a reason why it cost more. Generally they work better and last longer...

[@fastsetinthewest]

You sound real dude. I'm glad to see a happy farmer. Home life must be good. Enjoy. Eaglegards 🦅...

[@hoodwinkedbyanangelmichaelfazi]

I would like to see a close up of the innards. THUMBS UP

[@onelonleyfarmer]

HoodwinkedbyanAngel Michael Fazio I will get that for you

[@Bauzaunvideos]

We like to say: Spending money does not stop with buying the machine. I think you went along well with the Krone on that topic .

[@mchl8]

At 1st i wasnt sure if i had selected a vid that was 2yrs old. Ok so now that is cleared who is going run the older bailer n with what tractor. I think i see you keeping the 8320 with the new bailer to test it out in case of adjustments etc.

[@stanleyjones4180]

great video wes looking forward to seeing it working

[@tapertrain1614]

Quote from my dad, "Don't fix if it aint broke.'' The Krone has by far has been your most reliable baler. Just look at your video history, I think you were working on the New Hollands every day.

[@scottburton650]

Can't wait to see that baler in the field soon

[@amsimons29]

Here in washinton st here where in at we got 3.8 inches of rain yesterday on top of all the rain and snow the days before

[@Greg_Gatsby]

You’ll remember the quality long after you’ve forgotten the price. Great video! 🤠

[@throttlebottle5906]

rain and muddy field, then ice and snow atop , just enough to make it a big soup pie

[@Figo90210]

The first ten second is 100% you... please do more...

[@sr633]

They should of given you a Krone jacket and hat with that purchase !!

[@chrismorris308]

Cool that KRONE loaded the bailer with twine😎👍👍👍

[@ozlakota1]

one in Australia done 8000 bales for sale approx 34k us$ 50k ozzie $

[@chucklesx]

Run what works for ya, simples ☺ The fact that Krone allow you to fit any upgraded parts during your yearly service meaning you nearly have a new bailer each season can't be a bad thing. I know it costs money but I'm sure you are getting warranty on any work Messicks do each year and it keeps a good relationship with them going forward. Having 2 machines the same is a hugh benefit not only from a spares point of view but also for the operators, they can move between machines without any issues and not lose any time geting to know the machine. Best of luck with new member of the Pandy fleet!

[@IwanTimmermans]

I like the KRONE equipment

[@donmann8400]

Love your no bull shit honesty.

[@legodragonxp]

BEST KZbin INTRO OF THE YEAR!

[@darkangel2102]

Hahahaha the start of your video made me laugh!!!!

[@jameschristiansson3137]

Crowin' again, must be a good baler.

[@NekitaNet]

Looks like a wonderful baler!

[@kutzeeuw]

2 krone balers .next a Nice big m mower , too complete the krone package 😉

[@dannythomas5902]

Good choice Wes if it works for you stay with it

[@willcojak9650]

Wet here in South Carolina too.

[@mikenicholson2548]

If you like it stay with what you have plus you already know how to work on it makes life easier

[@B.E.Long.63]

Just love that intro...... Peace my friend....

[@Hesston4860s]

The new Massey 2370 extra HD blows everything else on the market out the water ATM.

[@JohnDeerefan-fo1qp]

Except a 1290 HDP hi-speed.. a crew i worked on in the U.K demoed the new massey new john deere and the new new holland baler beside their own 1290 HDP 8 stringer. The krone and Deere came out on top. With the krone ahead of the Deere.

[@nathanbrodeur]

Wes I believe the bale scale was another thing that broke on the first Krone

[@donald1056]

Raining like crazy there the way it sound

[@bobgwinn5091]

wow what a monster machine

[@ernestworrall367]

Who's going to be running the new krone when you go to bail straw

[@clarkeseymour4684]

Krone baler reliable like John Deere tractors

[@possleaholsteinspossbrofar8429]

You got lots. We drove through it on 76.

[@BrotherJohn-mz4qe]

What are you doing with your old baler?

[@capt1e3]

What tractor will be in front of the new Krone BigPack?

[@bobt5002]

Good is not cheap .Cheap is not good!

[@mikebauer9202]

No bail included. Krone kicks ass.

[@racer7954]

Thanks for the video, as always you’re great. How is Willam?? Hope your boy is growing like a weed!!!!!!

[@johnbrown9623]

Up time for the win.

[@willycase6430]

In the uk , I would guess claas is market leader.

[@4gauge10]

I think you made the best choice that could be made Wes,your spending nearly a QUARTER-OF-A-MILLION-DOLLARS on a machine that MUST be able to produce SEVERAL MILLION to earn its keep. I've watched many videos about your Krone Big-Pack,it's about the best that money can buy from what other farmers have said about them. Krone makes a really MEAN and I do mean MEAN self propelled silage machine.I watched a Krone 850hp.,cutting silage at about nearly 10 miles an hour,they had 6 53'foot semi's hauling out the silage,but every 7-8 minutes,the Krone 850 was filling up semi's so fast,many times the operator had to stop cutting,to allow the trucks to get back in field.

[@4gauge10]

@@batmann2o Oh I know,they make one more that puts out a whopping 1,000🐎💨horsepower and guzzels about 20 gallons of diesel per hour through the Mann diesel engine!!.WICKED!!.

[@4gauge10]

@Fendt BlackBeauty There's nothing wrong with my voice command system,I say something with emphasis it prints with caps lock, then when I speak more normally,it prints with no caps lock. I threw away my keyboard about 10 years ago and I've been on voice command ever since. It works great, I wouldn't have it any other way.

[@jaykeep3787]

I think you threw your brain away 10 years ago too...

[@tuba7084]

It’s hard keeping up with the small Krone chopper. I’ve helped haul from one and it takes quite a few wagons to keep it going all the time. It has to be almost chaotic with the larger machines to keep up hauling away from it.

[@4gauge10]

@@tuba7084 The little Krone is the 535hp.model,I believe it,after watching the 850hp.max out three trucks back to back to back in about just over 20 minutes,I thought that was just amazing.

[@stephenmccormick3546]

You made the right decision wes got to pay top dollar to get equipment you can produce with and trust to get the job done.

[@patmclean7856]

MN Millinial farmer has a deere 8260 he's looking to sell

[@crandallfixinstuff5853]

Come visit Monroe Tractor we will get you set up with a Claas :)))

[@seantaray7180]

in the long run... it is probably cheaper because of up time and production time. remember time=money. and you are not making anything with a broken piece of equipment...

[@BornRandy62]

You had a wonky part for the scale on the discharge side of the baler

[@deerezilla7013]

I know I love my krone’s. One thing I don’t like about the 2017 and newer baler is all codes or a sensor problem has to be looked up from the dealer computer no more help from the monitor

[@davidrowley8251]

All codes and sensor identifications are also listed in the Operator's manual, available printed or on .pdf I keep the .pdf on my Smart Phone and can do a search very quickly.

[@forestlawrencegrading9154]

Yep like the video just fine hope you like your new baler only thing I heard you express any dislike about was the tires

[@7810ftw]

very convenient you posting this video now im just pricing a newholland 80x90 plus silage spec and a krone 80x90 i have been warned about the stuffer system on krone costing alot of money if it goes wrong !! i do like the krone alot though

[@onelonleyfarmer]

The thing with the VFS is you have to check and change the bearings when it’s time

[@7810ftw]

@@onelonleyfarmer thanks for the reply do you know what the recommended interval for changing the bearings is ?

[@onelonleyfarmer]

7810ftw about 12k bales you can go 15k with the higher grease timing.

[@Blasterxp]

Are you going to put the reverse camera back on it? Love the camera angle

[@BillySwarthout]

Wes you should do a side by side Krone bailer. New and old one.

[@kbschoonerbrady6896]

Would the 7530 weighted and power-chipped work that new Krone?

[@buffranchAB]

Same as women, good don't come cheap

[@texrex999]

Like they say in racing, cheap, fast, reliable...pick two

[@MrE30]

Wes was there an upgrade to the side covers, when you open them you got covered in dust and chaff etc

[@hedydd2]

In Europe, all covers and shields must have a tool to open them these days. A simple handle will not satisfy regulators and most need a 13mm wrench to turn a nut by one flat before the handle can open the cover. It's an unnecessary pain in the arse. Complete safety overkill that just pisses people off.

[@davidrowley8251]

I keep a broom up on top. Before I open the side covers on the twine boxes, I get on top and sweep off the top of the box. Then I open the side covers.

[@rogerholloway8498]

I'm amazed you're a Ford man, when you seem to like the Cadillac of balers!

[@whiterazer1]

How about McHale?

[@joeburrows6]

+OneLonleyFarmer has finally let the rain let him loose his mind.

[@tomgarabed6568]

Wes, if I remember right, didn't you have an upgrade with the tires on the other Krone? Did you get the bigger tires on this new one?

[@tennif1]

Tom Garabed he tried, they didn’t work, he put the stock ones back on.

[@brothomspon4737]

Cheap is not always good and good is not always cheap

[@TheRick2130]

why krone again, i think part of the reason is your dealer support. yes you do most of work but when you need a phone call and someone can answer your question, that's a huge selling point to me..

[@JohnSmith-fx4se]

I don't know Wes, that's a tough nut to swallow. I REALLY would consider extending how long you use the bailer before trading up. It doesn't appear that the warranty is really worth it in your case.

[@onelonleyfarmer]

John Smith over 30k bales on the first one so when I’m done this hay year it will have 45+ on it

[@JohnSmith-fx4se]

@@onelonleyfarmer Forgive me, I'm just a citiot, what is their estimated life span? By the bale, in years? I'm just trying to understand how long their expected to last.

[@piperdoug428]

i am astounded that Krone hasn't approached you yet to do in field testing and upgrade longevity tests. petitioning shall start immediately

[@nigelmchugh5541]

PIPER DOUG They are probably running those trials in Germany.

[@piperdoug428]

@@nigelmchugh5541 yeah but Krone North America would gain allot of data and public credability by aligning with Wes dont ye think? if it can survive his type of hay and conditions ie. hills wet and temp range then maybe they'll throw him some freebies freebies freeeeebieeeees!!!

[@chriscreech716]

I hope you get some better weather have a good day

[@bhurley5243]

Hey Wes, you should have bought the New Holland baler. It would make for more entertaining videos.

[@claas6504]

Nice krone baler, hope it serves you well, but did you not consider a claas, over in Europe and England there a very common baler for the right reason

[@claas6504]

Sorry watched the full video and heard the reason