ive had 4 of these 155...... 15565........18565....3185, all great but fav is the 18565
@killianokeeffe71137 жыл бұрын
thanks good video..
@MrRobinsjanis4 жыл бұрын
Hello. I am enjoying your videos. I have an oppurtunity to buy 155-65 with broken crankshaft for 8k euros. Is there a way to test out the gearbox with the engine not running?
@onlygazza4 жыл бұрын
I don’t think so but if the engine crank has gone I would say the gearbox would be ok cos the engine is the problem. It’s a bit of a gamble but if you question the chap your thinking of buying it off about all the gears and if they were ok or not you might get a good deal, but be wary that it’s a gamble. Cheers for commenting and good luck to you 👍
@banburys3 жыл бұрын
Hi, if you are in high range and you are just moving off on flat ground with nothing on the rear what gear do you find you move off in ?? Do you find you always start in 1st or do you tend to find you just start in 2nd or 3rd ??? Cheers
@onlygazza3 жыл бұрын
Yep second or third 👍
@banburys3 жыл бұрын
@@onlygazza thanks for that 👍 Have a 135/65 and find as you say 2nd or 3rd is fine. Cheers
@samsparks18497 жыл бұрын
Hi bud can I ask I am looking for a cheap fastrac or 8340 for road work are you selling yours soon or know of any or models to go for. what money to spend on one many thanks
@onlygazza7 жыл бұрын
Hi Sam, it depends in what money you want to spend. A friend of mine has just bought a 155/65 a few months back and loves it, it was around the £10.000 mark, you can buy them quite a bit cheaper but be careful of what your buying and go and try it out first, if your not careful you can buy a dog. If you have a bit more money than that to spend I would go for the next model 185/65 ( Cummings engine in those ) or better than that the 1000 or 2000 series as they had 3 speed auto shift, not 2 like mine and 4w steer on some ( very good ) also were very reliable. I would like a 3230 with auto console shift if I could afford it but I can't. I love my old 155/65 and it's in brill condition and would find it hard to part with it, but Thanks for asking. they are cracking tractors, cheap, fast and nice to drive on the road, but don't forget to check them out well or it could cost you big bucks. Cheers for commenting and I hope you find what you want 😃
@darraghgilmore67237 жыл бұрын
Gazza's fastrac farming the gearbox is the exact same on the 1000 series
@robertcegiel72326 жыл бұрын
Do i have to Press cluch while i'm changing from low Gear to high Gear?
@onlygazza6 жыл бұрын
Robert Cegiel not when pressing the buttons as your driving along, but when your changing between gears with the gear-lever you already have the clutch pressed in as you change from 2nd to 3rd etc. If you mean changing ranges ( left hand side steering wheel 3 ranges ) always stop and use the clutch or you will damage the gearbox, hope this helps 😀👍
@robertcegiel72326 жыл бұрын
Gazza's fastrac farming thanks you very much
@williampopplewellmetaldete26417 жыл бұрын
nice one
@onlygazza7 жыл бұрын
Hello William, how's it going, one of my subs asked me to do this vid and always happy to help em out. Keep swinging that detector mate😀
@williampopplewellmetaldete26417 жыл бұрын
good doing a few day a week metal detecting u doing much
@onlygazza7 жыл бұрын
William Popplewell ive been waiting to go out detecting for months, but it's been too wet every day I can go, or I've been too busy. It's driving me crazy, I will get out during the next few weeks. Look after yourself mate 😀