A DETAILED WALKTHROUGH ON BLEEDING BRAKES ON THE HIMMY. BRAKE OIL LINK- amzn.to/44NaasZ
Пікірлер: 23
@enriquuu11 ай бұрын
A few things I would do to make this job less messy and faster - take an syringe and remove the brake oil in the reservoir and add fresh fluid then start the bleeding procedure (make sure not to press the levers while doing so or you'll double your work - i used a towel which I cut a slit in and covers the reservoir tightly (brake oil changes the color of your paint and ruins it ) - and can cut a "X"slit in the bottles neck and put the pipe in so the pipe in with the bottle cap so no spills and tape it later when disposing it off. And lastly wash the bike immediately after just in case you happend to miss anything And most importantly changing the screws to stainless steel screws as my bike (2021) had both screws rusted near the threads which was a proper pain to get out
@atharvathuse948411 ай бұрын
A Pro Tip From My Side would be That Take a Old Rag That Still Absorbs water well... Take That Rag Dampen it and Keep it On a throttle and Use plenty of Paper towels to Cover all Side Of The Brake Reservoir Because Sometimes While to Depress the Brake it Tends to Came Back Up and Dot 4 is corrosive liquid... And would Damage the Paint... And In the Situation the Brake Liquid Spils the Paper towles would Absorb it and If Some Seeps past it use the Wet Rag to Clean it off the Body and Paint... Stay Safe Guys...
@heleti000011 ай бұрын
Just flushed changed the fluid with Dot4 on my '21 Himalayan. Very easy job - only two issues, 1. The level of the light coloured oil is virtually impossible to see through the front brake reservoir sight glass. Could not find any Dot4 that had a colour other than "light wheat". 2. Why are the front and rear brake nipples different sizes ? Really enjoy your videos- extremely informative and easy to follow. Thanks from Oz 👍
@ONTWOWHEELSBEN11 ай бұрын
Yes , that’s a serious problem. The sight window doesn’t show anything. The oil level is a tricky thing
@krishnaprasad51819 ай бұрын
Hi ben. Next time try using dot 5.1. It is compatible with dot 3 and 4
@BandaTravelGrapher10 ай бұрын
hello ben wonderful videos i just wanted to know which sump guard you're using? (the bash plate)
@ONTWOWHEELSBEN10 ай бұрын
Sw motech . Watch my video on the same
@MikesProjectsandHobbiesMC11 ай бұрын
Great video. Do you guys have ABS models there? When I swapped out the caliper for a larger one it took a very long time to bleed through the ABS system but eventually we (my wife and I) got it done.
@ONTWOWHEELSBEN11 ай бұрын
Yes we do have the abs models . Mine is the last non abs one . Feb 2018 . I just saw your short on the short dog bones . Wish I could get one here . How much was the difference in ground clearance in mm ? The foot pegs are way too low for comfort for rock riding .
@MikesProjectsandHobbiesMC11 ай бұрын
@@ONTWOWHEELSBEN They move the axle about 22mm downwards.
@aviator998511 ай бұрын
🫡
@wallmaker8410 ай бұрын
@@ONTWOWHEELSBENDo you know if Himmy with ABS system the bleeding process is the same?
@salusuresh11 ай бұрын
Bro❤
@Chethans2611 ай бұрын
Which breakpads are you using now and which one do you recommend for all terrains and road conditions?
@ONTWOWHEELSBEN11 ай бұрын
Vesrah any day
@The_TribelessExplorer11 ай бұрын
Could you show us how to do the same on the rear break?
@atharvathuse948411 ай бұрын
It's a Similar Process
@azmaths91110 ай бұрын
Hey Ben what’s the difference between dot 4 and 5?
@ONTWOWHEELSBEN10 ай бұрын
Dot 5 can take on heat better . But flush the system before switching to Dot 5