oogie snowglobe

[@mslalahopwood5]

Omg thank you so much for being straight to the point! I have zero patience for all that rambling that people do, along with the long intro. Thank you, thank you for all the great tips💓💓💓💓

[@Heather_books0]

Lmao same my add won't let me

[@1jennay]

Thank you for explaining everything and showing us exactly how you made it! I appreciate it ! I’ve been wanting to make my own cup for a long time

[@leticiaisabelgonzalezmacia791]

That is so cute!!! Love it!

[@crystalremache1384]

You should try using a gorilla glue dot on the holes and then put the resin. 😊

[@sandywilcox9745]

Thank you for showing all of your steps. I have been wanting to try one as my son and I love NBC. You made it look so easy!

[@Heather_books0]

It's super easy I hope it works.

[@faithdavis3496]

Where did you get them from the Oogie boogie things shapes

[@pauldebrabant4444]

I've saved ur tutorial. Just love it. Can you tell me what the name on the bottle of resin and the name of the uv light that u are using? Thanks so much

[@moonbaby1985]

You could use those plastic sheets they use for shakers to cover the hole prior to adding the uv resin.

[@Heather_books0]

I ordered some ty so much for the comment

[@faithdavis3496]

What was the solution that you use?

[@sharinessig7806]

Not sure if you will answer because you made this pretty tumbler 2years ago. Did you buy the cup pre made or is that vinyl.

[@Heather_books0]

Hi so it’s vinyl it’s a layer design

[@Aracnomother]

So you want an air bubble when you do cups like this? I want to start but I’m so nervous.

[@boniemann]

All the other videos I’ve watched on these they say NO air bubble, guess it just depends on what you want….the air bubble would drive me nuts 🤣🤣

[@Heather_books0]

It really depends on you my snowglobes have so much movement and flow cause I leave a small air bubble.

[@pauldebrabant4444]

Also what's the reason for using glue instead of oy using water? Thanks again

[@yaresigarza5750]

What size are the jack clay sprinkles?

[@erikyanez1093]

The glue and water want go bad ? Like mold and stuff ?

[@Heather_books0]

No I use distilled water.

[@SAsanchez86]

Am I able to use white Elmer's glue.. ... I happen o have a gallon sitting at home ..

[@Heather_books0]

No the white will show up in the liquid cause it never dries to be clear.

[@jamiecooper737]

Would the colored glitter glue work if you didn't have just clear glue?

[@Heather_books0]

It might lol idk I haven't tried ir

[@SuperAmandalou]

Hi how did you make your holes please? Thanks

[@Heather_books0]

I drill them :) 3/8 bit

[@jennifermassey8911]

I love this video. I was wondering why do you use elmers glue ? I haven’t seen a video they use glue for the mix. Thanks

[@Heather_books0]

It's gives a better flow :) slows it down.

[@jennifermassey8911]

Thank you for explaining. Also for the glow powder did you use the green to green Color or white to green ? Thanks

[@Heather_books0]

@@jennifermassey8911 uh I used green to green but u could u white to with the green mica.

[@jenniferr2289]

So cute! How do the polymer clay pieces not deteriorate in the fluids over time?

[@jennifermassey8911]

Hi I wanted to ask. I finally made one of these. But I noticed the glow or mica powder clumped up. Did I use too much ? Thanks

[@Heather_books0]

U may have. But the type has to do with it to. I noticed stuff from like Amazon and some companies are just cheaper. So they don't work as well.

[@jennifermassey8911]

I bought the same materials you used. But I think I used too much. It didn’t seem like it at the time.

[@Heather_books0]

@@jennifermassey8911 ya may have been to much then. Did u use the same mixture?

[@jennifermassey8911]

@@Heather_books0 I did for the water and glue. But I don’t believe I heard the measurements for the powders and glitter in the video. So I winged it. Lol

[@claudiachavez4020]

Were can i get the nightmare faces ?

[@Heather_books0]

Hey so u can get them on etsy

[@krystalroberts7467]

Which mica and glow power did you use so I get the right one from the website. I love this cup.

[@Heather_books0]

Hey everything I use is from. Glitzygirlglitter.com... use my code Silascrafts10 :)

[@jasmineanderson-fransen654]

How do you make the liquid? Is it glow powder?

[@Heather_books0]

I use glow powder and mix with my mixture

[@LOVESTOWRITEKID24]

do u think everythin minus the green glow and glitter would work or mayb even use food colorin tryin2fig out how2make some 4 men lol

[@alexiscockey8360]

Hello! Can we use a cup spinner to assist in this process? After sealing the bottom of course!!!

[@Heather_books0]

No the epoxy won't stick to it if that's what u mean lol. It don't really need to be sealed in or anything

[@alexiscockey8360]

@@Heather_books0 lol kinda sorta lol. I meant, does the spinning of the cup assist with releasing the air bubbles after we've completed the crafting aspect of things?

[@Heather_books0]

@@alexiscockey8360 oh no the liquid being added and the small air hole helps push air out

[@rosemarydiaz9646]

What size bottle are you using for your mixture?

[@Heather_books0]

It's just a condiments bottle lol off Amazon

[@brookeortiz1288]

Are these the 5mm? Or the 10mm?

[@Heather_books0]

I use the 5mm

[@aliciamata8272]

Hi can you give me the exact mica powder and glow powder you used on the glitter website. I’m a new subscriber and your video was great

[@Heather_books0]

So I used the neon mica and the green glow :)

[@lakeishabell8488]

Hi! If I’m just using glitter will the clay pieces still show? Or do they show better with a little paint ?

[@Heather_books0]

Oh u can just do glitter with them :)

[@CombatDiva19]

Would 2 part epoxy work just as good as the UV resin?

[@Heather_books0]

No I don't think so hun it will drip really bad into the holes u want it to seal right away.

[@nerdybunny4921]

Could you add acrylic paint to make it milky like the pink drink tumblers?

[@Heather_books0]

Yes I'm sure u can

[@kiddielandplayplace1548]

LOVE this tutorial- how do you make your glow liquid? i have glow powder but for some reason when i try and mix it in with my liquid eventually all the powder just sinks to the bottom..

[@Heather_books0]

Mine sinks to lol u just have to shake it up. And it will start moving again :)

[@janecarr8110]

How did you decorate the lid to the tumbler?

[@Heather_books0]

I'm not on this one I will be doing a new design with rhinestones.

[@heidicavagnaro811]

What uv resin did you use

[@Heather_books0]

I show it in the video :)

[@ChaunaCasteel]

Which resin and uv dryer do you have?

[@Heather_books0]

It's a small one off Amazon I got it forever ago I can't find the link for it :(

[@courtneydavis9877]

Do you find a benefit between mixing it with glue and water vs just VG? I was mixing mine with VG and I swear it loses it glow after a few days.

[@Heather_books0]

Yes the glow will last much longer. The VG I think it's just to oily to hold the micas wel

[@helentaso215]

How do you get the glow powder to mix mine just separates

[@Heather_books0]

I shake the crap out of it lol the powder I used mixes well 😀

[@danielleneff2594]

mine too and it will settle at top and hardened I've wasted 2 cups so far lol

[@Heather_books0]

@@danielleneff2594 mix it into the glue part of your mixture.

[@nicoleleon3018]

Do you always use glue for these kinds of cups

[@Heather_books0]

Yes glue and water I will be posting a new video soon measuring everything out but also adding glycerin see how it works

[@EmalaJiss]

Hello! I'm a new subscriber and I'm in love with your work! I really love your content! ✨ I saw on your tiktok video that you don't ship in canada so I guess you don't ship in France either 😅 I would like to know if it's a shipping price matter or something? I would be more than happy to pay extra if it's a shipping one because, in France, we don't use tumblers very often but I do, and a custom one would be lovely!

[@Heather_books0]

Shipping us super expensive 😫 so I always feel bad charging people that

[@EmalaJiss]

@@Heather_books0 I know it can be super expensive and I will be more than happy to pay whatever price you will need if this can be happening ! 😀 I mean.. Your work deserves to be buy 😭✨ Let me know if you are confortable working with me on that and if not I'll totally understand, no pressure 😁✨

[@Heather_books0]

@@EmalaJiss OK so just go to my work group Silas crafts:)

[@EmalaJiss]

@@Heather_books0 Alright see you there, thank you! 😘

[@rebekahbusald3427]

How do you do the decals on the cup?

[@carlaavila6047]

Stopppp 😭 I am starting my small business and all I've done is starbucks cups cold cups and clear tumblers. This makes me want to add a new style to my business! Love how you explained everything! ❤❤ New sub here! 🤍

[@tannamichelle]

Can you use regular elmers glue? Or does it have to be clear?

[@lakeishabell8488]

I’ve been using any clear glue

[@Heather_books0]

You want it ro be clear. The white will show if not

[@lorenaalston4811]

What kind of glue do you use? I searched your channel and couldn’t find a video 🤦🏽‍♀️😂 and mine keeps separating

[@Heather_books0]

I use clear Elmer's glue

[@celestety6664]

How much did you use for green powder

[@Heather_books0]

Honestly I don't measure lol I just pour till it looks right

[@Violin_Viola_Music_Box]

My question is, do these leak out the top? I have had horrible experiences will double walled tumblers falling apart and leaking out the top. I REALLY want to make some as gifts, but don't want to give a defective gift!

[@Heather_books0]

No I haven't had any leak from the top at all.

[@lflo8087]

So cute!

[@Heather_books0]

Thank you

[@beckybecerril3947]

How do I order 1 hun??

[@Heather_books0]

Hey hun so the easiest way is through my FB group Silas crafts

[@sarahgangel2848]

How did you make that mixture ???

[@Heather_books0]

It's glue and water and mica

[@samanthagonzalez2746]

How much glow did you add.

[@Heather_books0]

@@samanthagonzalez2746 honestly I don't measure I just keep adding till it looks right lol

[@jeisyruiz531]

Q le puso q esta verde

[@jjvyklc]

What do you use to make it glow?

[@Heather_books0]

It's glow mixa from Glitzygirlglitter.com use my code Silascrafts10 so u save some money :)

[@carmenstrader4503]

@@Heather_books0 how much do you use?

[@Heather_books0]

Honestly I don't measure lol I just dump some In. And add more if I need to.

[@noemiramirez2440]

What happens if epoxy went in there

[@Heather_books0]

It shouldn't it may a little but it won't hurt it at all.

[@DreamLoveBeautyandMayhem]

Wouldn't it be easier to use glue dots to cover holes them resin over them

[@Heather_books0]

I thi k it just depends on the person. Lol I've done it this way so long that I can't get into the habit of another way.

[@melanieurbins2638]

Is this dishwasher safe ?

[@Heather_books0]

With the vinyl no it's a hand wash only

[@melanieurbins2638]

@@Heather_books0 thank you

[@gin38]

Do you sell these?

[@Heather_books0]

Yes

[@LUVLEYGREENFLOWER]

Hi! This is probably a dumb question but you said you added “glow” and also “mica”… would the glow be the glow powder off the glitzy website and then the mica would be the mica apple green? Sorry, just trying to understand cause I really like it how it came out!

[@Heather_books0]

Yes the glow powder is the mica glow powder off glitzygirlglitter.com

[@EVLZ88]

your codes not valid =/

[@Heather_books0]

Oh ya it is. It's Silascrafts10 :) glitzygirlglitter.com

[@Sofiac1981]

Loved this tutorial until your hands covered up you applying the resin!

[@Heather_books0]

I know I'm sorry I got a new stand so I can film better