OpenWRT - Setup Guest LAN

In this video, we will setup guest LAN on OpenWRT LuCI. I will show you how to create the VLAN on the Switch page, create the guest network interface and configure the firewall zone.
Devices in Guest LAN will have access to the internet, but it will not be able to access LuCI or other devices in your main LAN network (LAN isolation). You connect a switch to the Guest LAN network port and extend it.
- If you are looking for Guest WiFi tutorial, here is the link to it: • OpenWRT - Setup Guest ...
- If your router has multiple network interfaces (eth0, eth1, eth3) or it is an x86 PC, each of the network interface will a physical interface, so there will be no VLAN creation.
Video timeframe:
00:00​ - OpenWRT Guest LAN Introduction
00:25 - Router and network ports overview
01:35​ - Create new VLAN for Guest LAN on LuCI
03:00​ - Create new network interface for Guest LAN on LuCI
04:52​ - Guest LAN Firewall zone configuration & Traffic rules
07:40​ - Result and Tests
Check out the OpenWRT tutorial playlist: • OpenWRT Tutorial
Thanks for watching and see you again!

[@PiotrK2022]

@ Van Tech Corner Geez, thank you so much... I watched 5 tutorials and still i wans't able to understand vlan setup. I watched ur video and everything is now clear. Thank you once again!!

[@VanTechCorner]

You're welcome. There is also Guest WiFi and other VLAN configuration video on the channel. Feel free to check it at kzbin.info/aero/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC

[@tashev85]

Great tutorial. Exactly what I needed.

[@glennperete]

Hi, I followed this guide and attached an access point to the guest lan port. The guest access point can access the internet, but i cannot manage the access point from the main network. Any tips to fix this? edit: solved at 6:00, "Allow forward from source zones->lan"

[@thanhtuanpham5900]

many thanks

[@juniorst]

Hi! I want to create a bridge between guest-wifi and an port 4 in VLAN, is this possible? Every time that I do this, the guest wifi stop getting IP from DHCP, but the physical LAN 4 port work just fine

[@mrdymeq]

How to isolate clients in Guest LAN the same as Guest WIFI?

[@mazizodelarmy]

Can you do this configuration for FreshTomato firmware? 😊

[@v0ldy54]

May I know why you simply didn't bridge the new VLAN interface with the already existing "guest wifi" interface? I've tried it on my system and it works fine.

[@VanTechCorner]

Hi, as you can see they are in different subnet and that's how I want to setup. GUEST-LAN is 192.168.3.0/24 and GUEST-WIFI is 192.168.2.0/24.

[@masialokas1200]

How do you pronounce 53? Compare it with 33. I heard one but saw another. Automatic subtitles work better with -Setup guest wifi video. See what Google heard there.

[@VanTechCorner]

Hello, it is 53. There is no port number 33 mentioned, if there was it an error.

[@aleksandr2548]

What about OpenWrt 23.05?

[@VanTechCorner]

Hi, there is a link to the official OpenWrt docs. I believe it should work for OpenWrt 23 as well.