Operation video: New Products RD6006 RD6006W 60V/6A Power supply with PC software and APP by WIFI

[@rdtech9153]

As old rules, when the new products are published, we will set the lowest price for only 5 days(2019.10.23-2019.10.27 Pacific Time). RD6006: 47.68 USD (normal price 55 USD), RD6006-W: 51.18 USD (normal price 60 USD) S06A: 28.43 (normal price 33 USD), S06D: 18.81 (normal price 23 USD), Time is limit, please seize this chance. If you help me spread the message(need to show that we publish RD6006, product link, discount information, with some picture of RD6006), there will be a gift when you make order, not send separately, just take a picture to show me. 1, spread on 1 or 2 different forum or social media, voltage meter as gift, worth about 1-3 USD 2, spread on 3 or 4 or 5 different forums or social medias, voltage converter as gift, worth about 3-6 USD(you can get this easily if you have twitter/Facebook/Instagram) 3, spread on more than 6 different forums or social medias, AT34 as gift, worth about 9 USD All gifts are random with corresponding value. Remember to take a picture show the result, I will give you the gift

[@thomas_w]

Do you still do That?

[@rdtech9153]

@@thomas_w the activity has stopped

[@neiliewheeliebin]

Great power supply fast & accurate, miles ahead of my old 2N3055 system. A previous firmware update somehow messed up the calibration badly but i easily reset following the video guide on this channel. Been using this for about 6 months now very nice to use no regrets good aftermarket support makes a big difference

[@АндрейВорошилов-е9и]

Шикарный блок питания! Наконец-то просьбы покупателей и блогеров по доработке и интерфейсу были услышаны!

[@rdtech9153]

yes, we consider the suggestions and make a new series power supply, if you like it , you can order one when the price is low now,, the discount and gift information is shown at top

[@williamfoin7162]

Félicitations, encore un produit de qualité et une démo pour bien expliquer son utilisation. J'ai plusieurs de vos produits et ils sont tous de très bonne qualité. Avec ce nouveau produit vous prouvez encore que vous êtes dans la recherche d'améliorations.

[@rdtech9153]

thank you for your support, and indeed it is important to keep updating. if you have interest, you can order one when the price is lowest, and the gift rules is on the top

[@sampathrajapaksha876]

As always, a quality-made product. I myself use many of your products and there are no complaints

[@rdtech9153]

thank you for your support, glad that you like them , and you can also order one as the price is lowest if you have interest, there is gift if you take part in the activity, rules shown on the top

[@RoDanTV]

Hello! As always, a quality-made product. I myself use many of your products in business and there are no complaints! I wish you success in your business!

[@rdtech9153]

thank you so much , you are best friends hope you spread this message to your more friends

[@MrDemalit]

Congratulations! Very nice job!

[@rdtech9153]

haha,thank you, glad that you like it. we just published it and it will keep the lowest the price for 5 days,RD6006: 47.68 USD (normal price 55 USD), RD6006-W: 51.18 USD (normal price 60 USD) ,S06A: 28.43 (normal price 33 USD), S06D: 18.81 (normal price 23 USD), Time is limit, please seize this chance. If you help me spread the message(need to show that we publish RD6006, product link, discount information, with some picture of RD6006), there will be a gift when you make order, not send separately, just take a picture to show me. 1, spread on 1 or 2 different forum or social media, voltage meter as gift, worth about 1-3 USD 2, spread on 3 or 4 or 5 different forums or social medias, voltage converter as gift, worth about 3-6 USD(you can get this easily if you have twitter/Facebook/Instagram) 3, spread on more than 6 different forums or social medias, AT34 as gift, worth about 9 USD All gifts are random with corresponding value. Remember to take a picture show the result, I will give you the gift

[@rdtech9153]

you have contacted me on aliexpress , right ?

[@MrDemalit]

@@rdtech9153 Yes!)

[@rdtech9153]

@@MrDemalit thank you , hope you get it fast

[@paulg.3067]

I like my RD6006, but now I am waiting for a Deskt-DMM from RD-Tech :D

[@rdtech9153]

thank you

[@EasyOne]

Nicely done

[@rdtech9153]

thank you

[@VladimirUlianov152]

Заказал в Вашем магазине один такой модуль на пробу. Если понравится (а скорее всего понравится), то закажу еще один для сборки двухканального ЛБП). Скажите, Вы не планируете создать в подобном форм-факторе электронную нагрузку для тестирования блоков питания и аккумуляторов? Чтобы можно было задавать кнопками различные пороги ограничения напряжения и тока, задавать режимы CV, CC, CW, измерять температуру источника энергии подключающимся внешним датчиком-зондом, имитировать разнообразные типы нагрузок (например пульсирующую для проверки устойчивости блока питания к внешним помехам по входу), плавное повышение тока нагрузки для проверки момента срабатывания защиты PSU на короткое замыкание, и т. п. Вести логирование значений напряжения, тока мощности, затраченной энергии и температуры в виде числовых значений и/или упрощенных графиков на дисплее и передавать их на подключенный компьютер с ПО, сохранять данные и проверочные программы в ячейки памяти, загружать их в компьютер и выгружать с компьютера в устройство и т. п.? Как бонус, можно добавить в устройство цепь заряда аккумуляторов, как это уже есть в RD6006, чтобы иметь возможность циклически заряжать и разряжать аккумуляторы с автоматическим построением графиков по аналогии выше. Как Вам такая идея? Существующие сейчас на рынке электронные нагрузки либо имеют гигантскую цену, либо очень примитивный функционал, либо специфическое применение (например, мне встречалась модель, способная подключаться к компьютеру, умеющая рисовать графики и тестировать источник энергии, но применимая только для источников с USB разъемами и соответствующими ограничениями по току/напряжению). Мне кажется, что на базе уже созданной вашей фирмой великолепной платформы можно без существенных затрат создать электронную нагрузку со всем описанным выше функционалом. Лично я бы такое с удовольствием купил) Спасибо!

[@rdtech9153]

Вы лучший друг, если вам это нравится, вы можете купить один, чтобы играть для вашего предложения - электрическая нагрузка, мы рассматриваем, большая проблема не техническая, это вес, он будет слишком тяжелым. Я согласен с тем, что вы сказали, что на рынке электронная нагрузка слишком высока ... если я хочу это сделать, я должен сделать дешевле и мощнее ... если он будет слишком тяжелым, он не будет дешевле, я буду считать, что. может быть, когда-нибудь, мы разработаем один еще раз спасибо

[@VladimirUlianov152]

@@rdtech9153 спасибо за ответ. Буду ждать и надеяться на то, что электронная нагрузка от Вашей фирмы всё же будет создана когда-нибудь :)

[@rdtech9153]

@@VladimirUlianov152 Большое спасибо за вашу поддержку, я буду считать, что если мы опубликуем это, я скажу вам, вы можете продолжать смотреть наш канал

[@VladimirUlianov152]

Здравствуйте! Если позволите, имеется два вопроса: 1. Я правильно понимаю, что выходная клемма "земли" RD6006 гальванически связана с "землёй" источника питания и корпусом? То есть, использовать данный ЛБП в качестве источника отрицательного напряжения, просто меняя клеммы местами, невозможно для устройств с заземленной массой? 2. На таймкоде 5:05 видно, что после выбора ячейки памяти и подтверждения кнопкой "Enter", указанное в ней напряжение сразу же подаётся на выходные клеммы ЛБП (загорается подсветка кнопки "On/Off"). Можно ли каким-то образом настроить устройство так, чтобы при выборе ячейки выходы ЛБП оставались обесточенными, и напряжение подавалось только после последующего нажатия на кнопку "On/Off"? Возможно, данная опция присутствует в настройках устройства, но я не понял этого из-за плохого знания английского языка. Спасибо!

[@rdtech9153]

thank you for leaving comment: 1. RD6006 has no ground output terminal, it is grounded through theAC-DC power supply 2. At the main manu, you can see a "Call Out" option(6:22), turn on it, you can get output directly when call out a data group, and turn it off, you need to turn on the output manually may this answer can help you

[@VladimirUlianov152]

Rd Tech спасибо за исчерпывающие ответы!

[@rdtech9153]

@@VladimirUlianov152 you are welcome: )

[@wiedapp]

Is there any way to adjust and calibrate that thing to a better accuracy? Like some trimming potentiometers or a software setting? I realise it might be a bit much to ask for the price point, but that would still be a neat feature.

[@rdtech9153]

yes we have this function, but it needs a 5 1/2 digit multimeter and use pc software, I have uploaded a video, but it is privite, you can check this link:kzbin.info/www/bejne/mWrWn2StjpegoKc

[@wiedapp]

@@rdtech9153 Wow, thanks for the answer!

[@matthiaseck668]

The only thing which holds me from pressing the buy button is the fixed charging-cutoff at 10mA. Could you make that adjustable by the user?

[@rdtech9153]

thank you for leaving comment, we will optimize it, for now, it can not be set by user

[@rapidfabtech4182]

What a great power supply! It's so flexible and somewhat programmable. But I cant find information about which fuse I need for the output of RD6018.

[@rdtech9153]

it is 20A fuse and we have a backup fuse in the RD6018 box

[@brainfarth]

@@rdtech9153 What size package is it? I need to order more.

[@rdtech9153]

@@brainfarth which product do you mean, usually at the product page, you can see the size information of the product

[@brainfarth]

@@rdtech9153 The fuse for the RD6018.

[@rdtech9153]

@@brainfarth 1808 25A-65V fast below fuse

[@maurocelsolopes854]

Por que vocês não vendem uma fonte completa, pronta para ligar em 110V/220V com esse regulador?

[@rdtech9153]

thank you for your comment, because a complete power supply it may be damaged on the way, so we send these parts separately, and different customer perfer different AC-DC power supply, so we just sell RD6006 and the case, but you can see it is quite easy to assemble right?

[@frosty129]

This supply puts out 100mV peek-to-peek ripple. How to reduce it? I like the interface and ease of use, but I need ultra low noise and ripple, in micro-volts. Can I put a CLC filter at the output?

[@rdtech9153]

yes you can but there is one thing you need to know, if you add a filter, the voltage drop will increase, so the output voltage will not be so accurate

[@user-sol]

В чем особенность выхода для батарей? На этом выходе особый режим работы?

[@rdtech9153]

it has extra protection function for battery charging, you can see my latest video, when the battery is connected correctly, the indicator will change the status, and when power on the indicator will change again to show you the status, when the battery is connected in the wrong way, the indicator will not change and so that you can see it is connect abnormally

[@cfzone8685]

Great video! I have this power supply, and I have one question that wasn't in the video. Is it possible to manually set the power supply to go into CC mode?

[@rdtech9153]

thank you for your comment, the output mode depends on the set voltage U-SET, set current I-SET and the load resistance R, when RU-SET/I-SET, it is CV mode

[@arvumpro]

Hi, Nice variable power supply, my doubts: 1. Does it connect to 110-220 VAC? 2. Should I supply DCV to your input or ACV? Thank you

[@rdtech9153]

thank you for your comment, the input of our products are all DCV, and you need to add a 400W switch power supply so that you can connect to 110-220 VAC

[@artharutunyan]

Great product. I would like to to know do you plan to build 20a version of this module? I have dps5020 but this looks and feels much more professional.

[@rdtech9153]

we will release the 12A version after one month, we redesign the circuit, and then we will make 18A and 24A version, but we are not sure about the exact time

[@artharutunyan]

Wow that’s impressive. A few days ago I have bought 50a version from another brand, but I’ll buy 12 a version (probably 6012) cuz this looks fantastic.

[@rdtech9153]

@@artharutunyan thank you :)

[@ВАСЯтв-д7т]

Сегодня в день распродажи решил заказать два таких БП.... Посмотрим, что получится... Очень красивая конструкция. Чего сейчас не понятно, если я закажу RS485, то где в корпусе дырка для этого разьема и вообще это надо? WIFI не хочу. Думаю, что на лабораторном столе будет фонить и это мне не нравится. Кто пробовал, я прав или нет?

[@rdtech9153]

спасибо за ваш комментарий, сейчас TTL порт недоступен и вам нужно подождать, мы сообщим вам, если мы закончили, и если вам не нравится WIFI, вы можете заказать режим без WIFI

[@tmho7091]

Hi, I am very interested in this power supply. But I do not understand why your power supply has settings for both the output voltage and current, and the over voltage and over current protection. It should be a good design or feature, but may be I do not have enough electronics knowledge to understand that. Could you please explain to me under what conditions that will be useful? Most other power supplies just have the voltage and current settings. When the voltage and current are set, that already means both the output and protection voltage and current are set. For example, when voltage is set at 10V and current is set at 1A, the maximum ouput voltage will be 10V and maximum output current will be 1A. When the load try to draw more than 1A, the power supply will activate the current protection to keep the current at 1A by lowering the voltage. When the load only draws 0.5A, the output current will only be 0.5A and the output will be kept at 10V. That is already over current protection and over voltage protection. If I am going to charge a lithium ion cell, I will set the voltage at 4.2V and current at 1A (for example). Then, usually at the beginning, the constant current or over current protection will kick in, that means the output voltage will be lowered than 4.2V so as to keep the current at 1A only. At the end of the charge, the constant voltage or over voltage protection will kick in. But your power supply has both the output voltage and current settings and over voltage protection and over current protection settings. Could you please tell me (preferably with examples) under what conditions and how the settings should be set in order to make good use of this power supply?

[@rdtech9153]

hello, thank you for your comment, the output voltage is what you set, and the output current setting is the limit value, if the real current exceeds what you set, it will output the current same as what you set, if the real current is lower than what you set, it will output the real current.

[@tmho7091]

@@rdtech9153 Thanks for your reply. But sorry, I do not understand your explanation. Are the over voltage protection and over current protection extra or second level protection?

[@rdtech9153]

@@tmho7091 not exact , but you can understand like that

[@steveclunn8165]

@@tmho7091 I just got one of these power supplies and I'm here looking at all the different features and how to run it. This power supply needs a power supply to feed it. You could do this with batteries or a power supply. That said you may not want to run your batteries down to low or put too much of a load on your power supply that's feeding this device. So you would set your input levels so as to protect your batteries or primary power supply. I'm really impressed with this device and will probably order another. I've gotten a bunch of their other meter to you can click on my profile picture

[@vladyslavverbytskyi7772]

thanks for the review

[@rdtech9153]

you are welcome, it is glad to help

[@MegaEvansito]

are you planning on making a higher amp version? like the dps5020?

[@rdtech9153]

hello, thank you for your comment, we will release high amp version this year 6012.6018.6024, not sure about the exact time

[@johnmacedo4483]

Rd Tech: An amazing product. I presently have the RD6006W that i bought. But unfodtunately the RD6006 is no longer suitable for my work. I have been waiting anxiously for one of the newer versions (for example the RD60018 oreven the RD60024). But unfortunately i cannot wait much longer. If they do not come out soon. I will just have to search for another solution. But still a great product. Congratulations.

[@rdtech9153]

@@johnmacedo4483 sorry we will release RD6012 first, affected by the corona virus, it make takes 3 months to release that, then we will release the next version

[@tacticaladvance]

I with you on this one looks great. A 20-40amp at 24v would be good for me (-:

[@rdtech9153]

@@tacticaladvance sorry for now we are making RD 60V series, and no plan for 24V/40A power supply at this stage

[@user-sol]

Хороший модуль. В ближайшем будущем Вы планируете развивать эту линейку мня RD6020 60V/20A ???

[@rdtech9153]

RD6006 is the first version of RD series and it will take some months or 1 year to release the whole series, the highest version may be RD6024, but you have to wait. for now the price is the lowest, you can get one if you need it, and before you buy this, you can spread the message on your social media, and give me the screenshot on aliexpress, so that we can give you extra gift, you can see the rules: We will set the lowest price for only 5 days(2019.10.23-2019.10.27 Pacific Time). RD6006: 47.68 USD (normal price 55 USD), RD6006-W: 51.18 USD (normal price 60 USD) S06A: 28.43 (normal price 33 USD), S06D: 18.81 (normal price 23 USD) If you help me spread the message(need to show that we publish RD6006, product link, discount information, with some picture of RD6006), there will be a gift when you make order, not send separately, just take a picture to show me. 1, spread on 1 or 2 different forum or social media, voltage meter as gift, worth about 1-3 USD 2, spread on 3 or 4 or 5 different forums or social medias, voltage converter as gift, worth about 3-6 USD(you can get this easily if you have twitter/Facebook/Instagram) 3, spread on more than 6 different forums or social medias, AT34 as gift, worth about 9 USD All gifts are random with corresponding value. Remember to take a picture show the result, I will give you the gift

[@user-sol]

@@rdtech9153 Я хочу версию RD6024 подожду сколько нужно)))

[@rdtech9153]

@@user-sol fine, I will tell you when it is released

[@rdtech9153]

@@user-sol and it will be long time , are you not interesting for this ?

[@user-sol]

@@rdtech9153 Мне интересно такое устройство но мне мало 6 ампер подожду выхода модели RD6024

[@MichaelBedok]

I have purchase a unit that is suppose to have WIFI module but seller send in unit without the WIFI module... If I want to enable the WIFI, what additional module to purchase and how to set up the firmware

[@rdtech9153]

do you buy the product at our offcial store? we sent product according to the order. you just need to order the wifi board and insert it, no need to download anything else

[@Medos996]

Hi, When will you be releasing a new version (with the big screen and new form factor) with 15 or 20 amps? Similar to dps5020 for example.

[@rdtech9153]

it should be released in a year, we plan to release 6012,6018,6024, but not sure about the accurate time,

[@schlomoshekelstein908]

@@rdtech9153 please hurry we need more amperage. also less noise

[@rdtech9153]

@@schlomoshekelstein908 please wait, they will be released in a year, but for ripple we are not sure, for now the typical ripple is 100mV VPP

[@schlomoshekelstein908]

@@rdtech9153 I purchased the RD6006 while I wait. What does the temperature probe control? does it stop charging if it detects temperatures are too high?

[@rdtech9153]

@@schlomoshekelstein908 for now it is just used to detect the temperature, we prepare these components in advance and then we add functions by updating the firmware.

[@KidCe.]

I hope the 10mA charging cuttoff is something that can be chanced by software update. If it would be user selactable I would buy this product because it would make the perfekt battery charger for my 12S3P Li-ion pack. 10mA is waaay to low for a 3P pack... And also to low for many single li ion, most specify 50mA charge termination current

[@rdtech9153]

so sorry we doesn't support modification now, and thank you for your advice I will tell our deisgner

[@KidCe.]

@@rdtech9153 Can you tell me if this is controlled by software or hardware? If is its hardware I might be able to do some modifications to make it work :)

[@rdtech9153]

@@KidCe. software

[@songkai1981]

要是能开放电流最大值限制就好了，目前只能设置6.2a。能不能逻辑上判断下用户设置的电压电流组合下的功率，如果不大于360W，应该允许这样的输出，比如15v+10a的组合。我明白目前pcb设计可能不支持大电流，但希望推出升级版。至少可以在现有硬件下测试最大电流承载能力，从固件升级给到用户更高的电流设置

[@rdtech9153]

通过固件升级是不行的，这是由硬件决定的，我们会推出这个系列的不同电流强度版本，之后会先推出12A版本，之后18A 和24A（时间待定）， 请根据实际需要购买相应版本

[@songkai1981]

Rd Tech 12A版本可以期待在什么时候到来？

[@rdtech9153]

@@songkai1981 快了，2-3个月，需要先在国内完成最后测试，具体时间看测试反馈

[@Romzes327]

Hello Bought your product there are 3 problems with RD6006 1) - it is impossible to select English, the Riden Power Supply program gives an error and closes. Windows 7 x64 2) - a problem with connecting the RD6006 to a computer Windows 7 x64, driver CH341SER installed correctly, port COM6, speed 115200, device 1. also selected on power supply. I connect the power supply to Micro USB, click the "online" button in the program, and the program freezes 3) - Can’t choose the English language of the power supply menu, only chinese

[@rdtech9153]

hello, we sold on aliexpress two days ago, so you bought it in China, please contact the email I leave in the description of this video, I will help you to solve the problem.

[@RobLatour]

I can not get my riden rd6006-w to connect to my android app or my pc using wifi - it does connect to my pc using usb. For the wifi I get as far as clicking the ‘network distribution’ but it always times out with no ip address being displayed on the rd6006-w screen. It may be I have a defective wifi board, but it may be something else. I cannot find a support email address to ask this question. Hope you can help, at least to say where I should email for help.

[@rdtech9153]

sorry for the late reply, my email is written in the description of this video, please contact this email, if you can make a short video to show the problem, it will be much easier to find out the problem

[@jeffescortlx]

Do you know if a dual output version is going to be available?

[@rdtech9153]

for now our products can't support that , so sorry

[@UniSoft2]

FYI: If anyone interested, you can find my custom firmware for RD6006. If you have any ideas, wishes, what to change or what to add in to the firmware, or found any bugs, just let me know. www.eevblog.com/forum/testgear/ruideng-riden-rd6006-dc-power-supply/msg3192172/#msg3192172 monitor.net.ru/forum/threads/651114/page-10

[@jacquesmertens3369]

Wish I could buy your products via Amazon in Europe.

[@rdtech9153]

sorry for now we don't have amazon shop

[@amardila]

Hi, I am interested in your Power Supply, but I need the communication protocol to control it ¿Do you provide the protocol?. Thanks.

[@rdtech9153]

sorry for now we don't offer the protocols

[@ColinMcCormack]

Hi. Will you provide interface specifications to allow me to write my own control software?

[@rdtech9153]

for this , I need to ask , if there is communication protocol , I will provide, for now , we did not provide that

[@ColinMcCormack]

@@rdtech9153 thank you. For me, it is very important. I think it will, at least, not harm Ruideng, and will mostly be good for you.

[@rdtech9153]

@@ColinMcCormack you can wait , later we will provide, please wait

[@ColinMcCormack]

Thank you!

[@rdtech9153]

@@ColinMcCormack you are welcome

[@omegaplastics]

I ordered a rd6006-w from banggood on 11/29/2019 and as of 12/17/2019 it is still on back order and they told me they have no way to let me know when it will be can ship. Is there a production problem? do you know when it wil be back in stock. Thank You...

[@rdtech9153]

sorry for that, there is no product problem, I don't know what is wrong because Banggood is one of our resellers, they use their own warehouse.

[@arnaldoestriga2333]

Gostaria de saber se funciona em serie para realizar uma alimentação simétrica .

[@rdtech9153]

I am sorry my friend, the output must be used seperately, they can not be connected in series or parallel

[@petermather3049]

Can you enable PC software over WiFi?

[@rdtech9153]

you can use wifi to control, but the function is under test, you can try, but I cannot guarantee it can work on every computer

[@e74av]

So far, first impressions and discovered problems: 1. Unclear where to get the android app 2. Failing if you have special characters in the wifi password 3. There is no option to reset wifi settings or to change wifi password

[@rdtech9153]

thank you for your comment, this video is old, so here is the solution: 1. for android, search "RdPower" in google play or download the zipfile, for IOS, search "RdPower" in app store 2. for now, the password can only be Numbers and letters, even though you phone can recognize some special character, it may becomes messy code in chip 3. turn on your RD6006 and press left button and ENTER to reset the wifi setting in RD6006

[@SOMBRADANOITE69]

boa noite preciso do manual voce podem fornecer

[@rdtech9153]

please check this link: drive.google.com/open?id=17V-JWHvqMF-NuWSznEiJ4RKrnn_Pkt5v

[@grazydinamite9933]

Крутий блок можна сказати професійний ЛБП нажаль я не понімаю англійський

[@rdtech9153]

Большое спасибо за ваше сообщение, за нашу инструкцию, мы переведем на Россию, для работы, это легко, вы должны использовать это если вам это нравится, вы можете купить один

[@paulg.3067]

Connecting to wifi I still get "connecting Server... error". My phone goes not into standby or disconnect AP...

[@rdtech9153]

hello, can you try to use another phone to open hot spot, and connect it, see if it is successful, and if so, there must be some problem with the router, and you can contact me with email or on aliexpress directly

[@GeorgeFoot]

How do you activate constant-current mode?

[@Stefan_Van_pellicom]

Push I-Set, adjust to desired value, and the machine will limit at set amps. If set voltage limit is high enough, machine will adjust voltage to reach set amps.

[@rdtech9153]

@@Stefan_Van_pellicom thank you for your explaination : )

[@Stefan_Van_pellicom]

Thank you for making cool stuff ! 👍

[@erpa2003]

can't get my to work with the usb software

[@rdtech9153]

hello, sorry for that, can you contact the after sell service? because I cannot judge the problem just by your comments, I need to see the problem

[@spbse]

Не удается подключится по WIFI. Server connection error.

[@rdtech9153]

please use the pjone hot spot to test, if it works, please check if the phone IP address changed or if the phone is under the screen lock status

[@spbse]

@@rdtech9153 managed to solve the problem, thanks, there is a connection.

[@rdtech9153]

@@spbse if it can connected to the phone hot spot, maybe the router is far away, and the router should be 2.4GHz and it cannot be set to IP isolation.

[@spbse]

@@rdtech9153 спасибо! Все хорошо. Работает.

[@rdtech9153]

@@spbse that's good, you can contact me if you meet any problems

[@muppetpaster]

got mine for 35$ incl. shipping from Ali

[@rdtech9153]

35$ for the case? if it is the price of RD6006, it should be a setting mistake, the seller will lose a lot

[@eydentube]

Cant find (rdpower)app anywhere its not even on google playstore

[@rdtech9153]

sorry for the late reply, it is placed in the spam comment, you can try RDPower, it should be there

[@slahedinebenhassen1230]

Bonjour vous pouvez pas ajouter la langue francaise et la langue arabe ?

[@rdtech9153]

it has French , no Arabic language

[@Tecnomasterca]

I live in Latin America. I am trying to acquire their products from their official store on Aliexpress, I can only pay with PayPal, but to my surprise on AliExpress they only accept PayPal payments for some countries and I do not live there. Could you help me? "AliExpress currently supports PAYPAL as payment methods for orders to the following countries. United States, United Kingdom, Spain, Portugal, France, Italy, Germany, Israel, Netherlands, Poland, Norway, Sweden, Saudi Arabia, United Arab Emirates". thank you very much!!!

[@rdtech9153]

Hi friend I have paypal account , I can accept payment , but for shipping way, it is a little complex, cheaper way is long time and not safe, for fast way, it will be a little expensive, if you really want , we can discuss the price

[@icsp2]

I cannot get software to run under Windows 10

[@rdtech9153]

where are you from ? now we are fixing Russia language swith problem, please wait

[@icsp2]

@@rdtech9153 From UK

[@rdtech9153]

@@icsp2 you can download now , we already solve the problem , now please check it

[@icsp2]

@@rdtech9153 Yes it works now. Thanks

[@rdtech9153]

@@icsp2 you are welcome

[@Alan96555]

You need help to traslate it into spanish? I would like to help if you need one hand with that.

[@rdtech9153]

hello, thank you. can you contact my email at the description of this video