Orange tutorial in Adobe Illustrator - 1 minute tutorial for beginner

[@Vectorialtutorial]

►Donate me: www.donationalerts.com/r/vectorial

[@pavithrabalasubramanian7344]

Here is a step by step process for those who are struggling: 1. For those creating on an artboard, create a rectangle and fill with any color. Make the rectangle cover the entire artboard and lock it. 2. Create a circle. Copy the circle and right click -> Paste -> Paste In Front. Adjust the new circle to be inside the outer circle. Fill orange for inner circle and white for outer circle. 3. Create a rectangle at the center of inner circle. The rectangle length should be as long as the radius of the circle. Select the rectangle, then click the rotate icon on left sidebar. There will be a blue dot in the middle of the rectangle. Drag the dot to the bottom of the rectangle and click Alt + Left. 4. Give 36 degree -> Copy. Press Ctrl + D to duplicate the copy of the rectangle until it is evenly distributed in inner circle. 4. Once this is done, select all and group it. Resize the grouped object as shown in video. 5. Now, create a new circle. Create a new rectangle above the circle that covers the half part of the circle. Select both objects and in Pathfinder -> Minus Front. 5. Fill orange to this half circle and move it to the grouped object. Arrange it back to the grouped object. Group all the objects, rotate it so that the orange seems to be slightly slanting. 6. Ungroup the orange and make a duplicate of the half circle. Make one half a shade darker to the orange color. Adjust the circles as shown in video and then select both circles. In Pathfinder -> Divide. 7. This divides the circles in three removable parts. Delete only the upper part of the grouped circle that seems to be sticking out of the orange. Now, select the both the remaining parts of circle and Pathfinder -> Merge. 8. Adjust the merged half circle as required with the orange. And you have your orange!

[@sllmku.7040]

Hero

[@kishore_15]

You did this on one minute but i have successfully finished in one hour 😊

[@Vectorialtutorial]

Great job! 😊 It's all about progress, not speed. Keep up the good work!

[@TabithaAbidua]

Me and you then 😩😩😅

[@aisyahsakura]

Hahahaaa i have successfully in 1 day

[@febsa1038]

😂😂😂​@@aisyahsakura

[@swnglo]

Nothing learned but how good you are at illustrator 😆

[@WildLemonAnimation]

Basic knowledge required for this project. Interesting to watch it. Thanks for the video.

[@Vectorialtutorial]

👋 You're welcome! I'm glad you found the video interesting. For this project, you'll need some basic knowledge of vector graphics and perhaps some understanding of channels in image editing software. Feel free to ask if you have any questions or need further clarification!

[@movingbapao]

It took me 21 minutes. But hey, I'm learning. Thanks a lot

[@JekSilaya]

How is this a tutorial? This is just showing work process.

[@muhasawa]

you should first learn the tools then only you'll get this 1 min tutorial bro

[@Vectorialtutorial]

Thank you for your feedback! I appreciate your perspective. Moving forward, I'll ensure that upcoming videos include more instructional content to better serve as tutorials. Feel free to provide suggestions or specific topics you'd like to see covered in future videos. Your input helps shape the content to better meet your needs. Thank you for your support!

[@timsonsuperman]

you can slow down the video :D i'm moving from PS to AI, those vids much better, u can adjust speed watching this video, not a 20min TUTORIAL of s1 speaking about every mouse movement and every sign :)

[@PixeLation1512]

@@Vectorialtutorial yeah man even i was going to say yk share more info on the tools and everythong.

[@aaaaaa-dv5fv]

0:45 - 0:46 how does she clone the half orange? first we see the outline fo the orange and then the orange appears.. Had she copied the half orange before and just hit paste? If so, why did the outline appear first?

[@Vectorialtutorial]

Thanks for your comment! I didn't demonstrate the copying process in detail in the video due to time constraints, but I used the ALT key shortcut to quickly duplicate objects. Holding down ALT and dragging any object will copy it.

[@lifeofateacher6106]

@@Vectorialtutorial yea i did it as well but how did both blend both well? :( i cannot able to do that

[@trseppiabrilla3587]

dunno I used ctrl C ahah

[@abrasionthermals9172]

I spent more than 1 hour figuring out the interface and trying to change background color from white to this brown. There is no such option as in Photoshop. How did you do it?

[@bioqube]

just use another squared rectangle in background, of color of ur choice

[@majocjacobindia]

Simple but well explained.l......

[@Vectorialtutorial]

Thank you! 🙌 I'm glad you found it helpful. 😊 Check out my latest video too, I think you'll enjoy it! 📹👍

[@MashrifaMimSharkar]

Impressive Tutorial

[@051shahniyati2]

What is the color code for 1st half orange color

[@somena4]

Is it possible to permanently show the transparency grid?

[@happinessakpan192]

Are you trying to teach or are you trying to show how good you are

[@BlueFrogCEO]

Hey guys, how do i Remove the outlines of the objects (Boxes, circles, etc.) ❤

[@daphnetelem4745]

Tutorial moving too fast. would be helpful to slow it down a bit.

[@Abrahamhamham]

Set speed to 0.75 or 0.5. Done.

[@jenniferallen4188]

@@Abrahamhamham Thank you, I didn't know I could change playback speed on YT, slowing videos down is really helpful for me

[@Supreme6606]

Thank you, I liked the video.

[@Vectorialtutorial]

Thank you! 🙌 Glad you enjoyed it! 😊

[@traditionalembroiderycloth8719]

How did you half circle i m trying many times but failed to pick the half circle please guide me

[@pavithrabalasubramanian7344]

create a new circle. Create a new rectangle above the circle that covers the half part of the circle. Select both objects and in Pathfinders -> Minus Front.

[@nocopyrightmusic6247]

that tooke me 1 hour

[@christopherwolf6189]

Youll get better keep at it

[@bs6863]

I couldn't do the ctrl + D , because its not working as yours. So can you explain it?

[@Vectorialtutorial]

The reason you couldn't perform Ctrl + D is likely because the program or application you're using doesn't support this function. However, you can duplicate an object using a different method. After selecting an object, you can hold down the Alt key and drag the object to the desired location. Then, if you press Ctrl + D immediately afterward, it will create a copy of the original object in the same direction and at the same distance. ❤️🌟

[@MEMEPIE-ir5zq]

Citra logo?

[@allahn0]

not really hard as expected but good work keep it up

[@Vectorialtutorial]

👍 Great job! Thanks for the feedback! I'm glad you found it manageable. Keep up the good work! 😊

[@anglerev5832]

what u press after un group to remove the unwanted part

[@valerieskata]

pathfinder, idk which one tho

[@anglerev5832]

@@valerieskata thanks i got it jst press del key to remove selected area through path finder

[@lukaskane8633]

the alt and left click together won't work!

[@fischlofficialxd]

you have to take rotate tool first

[@yoyogirl001]

Woow ❤️

[@gabru4147]

Amazing sir

[@mustafo_designer]

where you find inspiration for this illustrations???

[@mustafo_designer]

because I want open channel like yours

[@Vectorialtutorial]

@@mustafo_designer I am inspired by social networks such as Pinterest and other design works ►Join us telegram: t.me/vectorialtutorial

[@lavarimohammad]

could you please, draw nowrooz celebrate

[@kouchiee]

I'm not sure why but ungroup doesn't work for me. It only gives me the option to group :(

[@Spyray]

You need to group it first then you can ungroup them

[@gotnoname7051]

Why? ​@@Spyray

[@akitoakito8790]

Thank you ❤❤

[@Vectorialtutorial]

You're welcome! ❤️ We're grateful for your support! If you have any questions or suggestions, feel free to reach out. Keep watching and stay tuned for more content! 😊👍

[@sarahshizawi9619]

how to rotate in Apple ?

[@ss-vu5dg]

command+t

[@PKdesign888]

Thanks for VDO

[@Olimov_Design]

Please say something

[@Vectorialtutorial]

Thanks for dropping a comment on my channel! 😊👍 I've been sharing some of my recent projects in my latest videos, so make sure to check them out!

[@nickwalco]

ungroup isnt working help

[@NotYix]

just use the shortcuts :/

[@BAPPA_GD]

Thank you 466 sub 0:55 scribe i watching your every video

[@TrezzyPrezzy]

Do you have this tutorial for iPad

[@cokey5358]

how to remove outlines?

[@A__Gokulalakshmi]

make your stroke value zero either cancel it in more options. Note you can find stroke in right side sidebar

[@yogipatil-6533]

That's why im foreign countries they hire indians in place of locals

[@mohammadamirzahedi]

cool

[@Vectorialtutorial]

Glad you think so! If you have any suggestions or feedback, feel free to share. We're always looking to make our content even cooler.

[@Vishalnew2024]

4-10 jan 1st week 6 Jan 2021

[@Vishalnew2024]

7 jan 4 pm

[@alializadeh8195]

مرسی

[@mustafo_designer]

👍

[@hadriks]

0:21 Not work

[@TunHtetOo-m2l]

Me too

[@TroUrndlgr]

you have to click where he exacly click

[@Ratz99]

sir do you know what a tutorial even is?

[@hrsami9990]

🇧🇩🇧🇩 Me Banale

[@xandereasom2406]

Bro this is trash