Do you have a messy closet? Have you checked out the Pax Closet System from IKEA? kzbin.info/www/bejne/nH_dfKKCZsSHpbc
@thisdopechick2 жыл бұрын
honestly this was so helpful thank you.
@FieldGuidetoDIY2 жыл бұрын
I’m so glad it helped. Please let me know if you have questions or suggestions. Thanks so much for watching and sharing Good Intentions!
@kellygooge2170 Жыл бұрын
thank you for these videos!
@FieldGuidetoDIY Жыл бұрын
Aw, you are quite welcome Kelly. I’m so glad they are helping. Thanks so much for watching. Please let me know if you have any questions or recommendations.
@athomewithsharleen62752 жыл бұрын
Thank you so much.
@FieldGuidetoDIY2 жыл бұрын
You are quite welcome Sharleen. I’m so glad it helped. Please let me know if you have any questions or suggestions.
@FieldGuidetoDIY3 жыл бұрын
Do you have a messy closet? Have you checked out the Pax closet system from IKEA? kzbin.info/www/bejne/nH_dfKKCZsSHpbc
@monisamontoya2886 ай бұрын
Thank you for this information. My wire shelf collapsed and therefore I needed to replace 10 ft of hanging rod. The only way to get it was with 2 levels of rods in the Pax system. Is there a standard height for the 2 levels of hanging rods?
@FieldGuidetoDIY6 ай бұрын
There is not. It is completely adjustable for like suit coats and shirts/blouses or dresses, gowns, or slacks. I put mine two holes off the top. You can then hang a shirt yo to see where it falls for the bottom row.
@mathildegrabert1874 Жыл бұрын
Thank you! I’ve installed the shoe shelf, but I can’t close my closet now..
@FieldGuidetoDIY Жыл бұрын
Does the shoe shelf come out past the front of the unit?
@mattlayden3894 Жыл бұрын
@@FieldGuidetoDIYmine does, wife is not a happy camper 😂
@RacedriverMuhaha Жыл бұрын
I installed the pull-out hanger without the spacers, using different screws leftover from other Ikea furniture. I still don't understand what's the purpose of the spacers, they slide the same with or without.
@craigkovatch7564 Жыл бұрын
The bit skipping sounds like you were using a Phillips head instead of a Pozi-Drive head (PH vs PZ). Using the latter makes a WORLD of difference when assembling anything IKEA
@FieldGuidetoDIY Жыл бұрын
Craig, I'll definitely check that out. Thanks for the tip and thanks so much for watching!
@JacquelineKraszewski Жыл бұрын
can you share the link to which motion sensor light you use? thanks I just ordered my pax system but can't get a few of the items,...sign of the times
@FieldGuidetoDIY Жыл бұрын
Absolutely Jacqueline. Here ya go. amzn.to/3EAE21A. I ordered several others but landed on this model. We only use four in the closet. The remaining two - one I have resting in another closet on a wire shelf pointing down and the other I have stuck to a metal door to our garage (the light is magnetic). Thanks so much for watching.
@matthewilliamorgan Жыл бұрын
Can the pull out shoe shelf be installed to the lowest pre drilled holes?
@FieldGuidetoDIY Жыл бұрын
Sorry, I found that it didn’t have enough clearance. I had to install it the second hole from the bottom. I hope this helps and it’s not a dealbreaker.
@spectatorness879 ай бұрын
How to readjust the location of the pull outs? Help!
@FieldGuidetoDIY9 ай бұрын
Pop out the drawer box front he drawer slide. Then slide the drawer slide so you can see the screw heads holding the drawer slides. Remove the screws and reposition the drawer slide to the desire height/position. I hope this helps.
@hasnakhanom231311 ай бұрын
Can you add these to non ikea wardrobes?
@FieldGuidetoDIY11 ай бұрын
I’m not sure. I know IKEA has a uniform cut list with drill specs but I’m not familiar with all modular closet systems. Let me know what you decide and how it works out.