Orgone Pyramid - Everything You Need to Know

[@emfsafefamily6245]

Please ask questions or share your experience with orgone pyramids (orgonite)! I LOVE this topic! #1 - Looking for Orgonite that works? Get a special discount here 👉 orgoniseafrica.com/discount/Orgone202416 #2 - Interested in free orgonite being delivered to your door and more information to your inbox? Learn more here 👉 emfsafefamily.com/free-protection/

[@lightbearer3643]

Hi , the organites need to be made from fibreglass resin / polyester resin. Epoxy resin doesnt shrink which is needed to create the positive benefits with the clear quartz crystal.

[@emfsafefamily6245]

Great insight! Thanks for letting everyone know.

[@Fian_so]

What do you mean by shrinking sir? And please do we need the quartz crystals ? I thought the originals didn't have them

[@woodenleaves]

Light Bearer, would you please share where can we find more valuable info like that?

[@lightbearer3643]

Hi I researched a long time ago so it's all over the place but look under LITEtheLITE there's a section on pyrimid information. for an overview and other people you can look at. There's a lot of info out there. Wilhelm Reich is the beginning of the story. Good luck😇🙏

[@woodenleaves]

@@lightbearer3643 thank you 💜

[@questionMark4443]

Thoughts become things so belief and feelings rule the universe inside us all thanks. Transmutation from negative to positive appeals to my spiritual side.

[@paulweston4994]

All resins shrink. Some shrink more than others but they all tighten during curing. You can also adjust how much they shrink using a curing accelerator or heat applied throughout curing. The quicker the cure the more it shrinks.

[@emfsafefamily6245]

Thanks Paul!

[@Whatisright]

Depending on the mold, if I were to use silicone, could I press around the mold to compress it just a bit as it cures?

[@tsa9591]

I love. this video as a newbie to making orgonites this was very helpful... Well when I say newbie I've been doing it for a few months now and love it

[@glaycard85]

Oh thanks for your informative video brother!

[@weaponizedautismofg.o.d.3490]

That little head scratch and looking to the side was comedy GOLD!!! Love it! HAHAHAHAHAHAHAHAHA

[@GreenEagleVR]

Bro acts like he just watched a StandUp Special 😭

[@kelleyeidem667]

Based on the way a cigarette lighter uses pressure on quartz to light the fluid, my guess would be that the orgonite provides the spark for the copper which is the conductor. The resin might also act to smooth out the energy that's released much like an insulator would do for an old fashioned radio in addition to its squeezing properties upon the crystals. Also, based on Professor Emeritus Martin Pall's work studying the dielectric force in cell membranes, it spurs me to wonder if a series of alternating THIN layers of copper and ground quartz would greatly multiply the strength of the orgonite. He found that the dielectric force increases 7,200,000 times in the tiny space of the membrane from one side to the other. It's a tiny distance to travel for such a great increase. I buy orgonite rather than make it, so maybe you could play with this if you make orgonite to find out if there is a benefit in doing it this way. Reich used nine layers instead of just three thicker layers, so maybe he found that multiple thinner layers were more effective?

[@Cardioid2035]

Apparently the answers of the universe are to be found within energy, frequencies and vibrations according to Nikolai Tesla, and I have to say I believe it. What makes things even more fascinating is that he was obsessed with the inner workings of the great pyramid of Giza, which later manifested into the Wardenclyffe tower. When you begin to narrow down the search for infallible truth in this existence and start to discern the more important details within it all, it seems pyramids always arise. From sacred geometry to modern science there’s ‘something’ about the pyramidal structure that mysteriously affects matter on earth…

[@Yeshuaschild93]

I am a targeted individual and suffer from voice to skull technology, directed energy weapons, psychic driving, and dream manipulation, as well as havana syndrome. Is there any advice for blocking the frey effect?

[@kelleyeidem667]

One more thing. I have found that rotating my orgonite (or tensor coils) magnifies the energy far beyond what one might imagine both in intensity and isn the distance the energy goes. Rotation and speed are the keys. I've used record players (tape or two sided wall hanger stickers) as well as stand up and vertical fans (super glue.) Ceiling fans (packing tape) are yet another option. Visiting stores two miles away no longer give me problems with their heavy WiFi, for example. Prior to this, their WiFi would hit me in a different place each time.One time it was so bad I couldn't take another step.

[@emfsafefamily6245]

Awesome tip! Thanks for sharing Kelley. It's on my to-do list to learn more about tensor coils.

[@kelleyeidem667]

@@emfsafefamily6245 Thank you for your kind words. We are sneaking up on the Telecom companies for sure. We've actually brought the 23-year drought to an end in the southwest over the last nine months by neutralizing the harmful "repeater" waves so that nature can form normal rain clouds. The desert and the southern mountains in California are now is the midst of what is called a rare Super Bloom. Also, the flu started out this year like gangbusters. So I started a campaign among orgonite, tensor ring, and Multi Wave Oscillator lovers around Thanksgiving. The flu stats dropped further and further was more people like yourself joined our little Handful of Heroes. The flu has been below the CDC's baseline for six weeks now. The beauty of this is we don't need anyone's permission to turn this world into a huge Garden of Eden. 🙂 Here an example of various ways to make these "Heartfelt Energizers." kzbin.info/www/bejne/j3nPfX-wecmFbcU

[@m0zzar353]

how do you measure this energy

[@Marginal391]

How do we distinguish artificial from natural resin, please? Thank you 🙂

[@Psilocin-City]

Belief

[@G00DBL00MS]

Excellent! Mahalo brother 💌

[@rahuaus990]

Thank you for clarifying !✨

[@Whatisright]

Now I want a mold that will let me compress it as it hardens. Just slowly increase the pressure every few hours, not enough to cause cracks or fractures.

[@hmmmmidk]

thank you

[@rahxephon52]

very informative. thank you.

[@robothug6688]

I have a question. About the shrinkage of the resin; what if i had quartz crystal with a 100 lb iron dumbbell on top of it. Would this have the same effect you would look for with the polyester resin? Or must it have pressure on all areas of the crystal?

[@robothug6688]

And im also asking wether this would have a stronger effect with resin involved? I was also wondering if a vice pushing down on a instrument almost close to crushing the crystal would have any effect while curing the resin. I was thinking of conducting some experiments lol

[@johnmclellan1981]

kzbin.info/www/bejne/lYmkc4Zmmbdka9Esi=yYwXGEJRAD7gkmHy

[@rhondarobinson3729]

I would like the EMF delivered to me😊

[@mikolim1020]

This is feng shui

[@witchycrafter1037]

Positive ions are bad negative ions are good!

[@hardwiredtoselfdestruction3401]

Can metal containers be used to make effective orgonites like resin, metal shavings, and crystals hardened inside copper cups?

[@emfsafefamily6245]

That's a really good question. In my opinion (educated guess), putting it in metal cups would likely direct most of the transmuted orgone (positive orgone) in a concentrated direction out of the cup, rather than it spreading out in all directions.

[@emfsafefamily6245]

This is the whole idea behind power wands... I'll have to find a link to one.

[@TopJimmyWinn]

Is orgonium or orgonite safer? I hear there's two? Is this true? Thnks

[@Pokemonanizer]

They are different. From what I understand, orgonium is resin infused with light (or something like that) while orgonite is resin, metal and quartz crystal (often with other beneficial crystals added). I’ve had a hard time finding more information on Orgonium and why the people who sell it say that it’s safer than orgonite... I’ll let you know when I find out more.

[@virajpatel8873]

@@Pokemonanizer did you find anything bro?

[@taraamoretti8853]

Awsome 💖💖

[@laurenbreyer1938]

Thank u for this!

[@jerryr.6908]

I thought there was going to be some special tools and tester to measure some of these energy in the vid

[@constancemoore6729]

Thank you!

[@Lovelighttt]

The links don’t work anymore. :(

[@Blitefuns]

Well said 👍 Let's talk about Geopathic stress 😖

[@SuperLuminalElf]

Share what you think you know

[@lovethelalaland]

Hi ! Thank you love your channel. I am trying to find out ways to get protected from emf. What about shungite ? Cooper ? Or all those ions cards or Q links ? Great info. This is the future now, what we need. Ty 😃

[@emfsafefamily6245]

Hi Kay, Thanks so much! Shungite is good and you can put shungite in your orgonite for improved effects. I'm not completely sold on the ion cards yet and I did get a q-link necklace and I'm still debating on that one too - I feel like I was more emotional when I would wear it...LOL... so it was probably doing something ;)

[@ryancampbell4987]

Orgone Crystal's is Original Orgasmic frequency Crystal 🔮 power.

[@jaredb9523]

What I don't get is Reich didn't use a quartz or resin... And he invented it.. so when people say if you want real orgonite... It's confusing... I've seen videos where they use a emf detector next to a outlet or phone and then bring a pyramid next to it and it goes to zero or even negative... I have a emf app that seems accurate but of all the OGs I've made they don't seem to effect it... Ami doing something wrong? I've used two different types of epoxy done ones with 50/50 and a quartz n a coil or two also some with added gemstone..

[@emfsafefamily6245]

Hi Jared, You're right it is confusing and great job making orgonite! The basic gist of it is: Reich discovered Orgone (a kind of universal energy) and invented Orgone accumulators to gather the Orgone. Then others used his research to create orgonite (the resin version of an accumulator), and then others further added quartz crystal to improve it's effects. Orgonite made correctly should be used with polyester resin because it shrinks when it cures and this puts pressure on the quartz to engage the piezo-electric effect which makes the orgonite do its thing :) - Also it typically won't reduce the amount of EMF, so you're not doing anything wrong. I'm not sure why others show it going to zero or negative... I'll have to look up those videos (feel free to send them my way). But overall: Use polyester resin and not epoxy with a 50/50 mix of metal and resin with a quartz crystal and you'll be jammin. Thanks!

[@ruwas369]

you will have to get a very simple orgonite with only metal shaving and the crystal. if there are all sort of crystal stones in there that dont match you, or the others stones used it wil be chaos.

[@nathanreed3857]

Orgone pucks are connected to the maker and vibrate with the makers energy level. Pucks vibrate around globe simultaneously and give echo location to the living sun and now your eyes are video cameras and you now control the weather. Good luck the army is waging weather warfare and u r da 1,,,,, lol jk

[@MrryPopinzYall]

People are crazy. you got this stuff which still is not explained and then you got Shungite going for $1000 for a tiny little pyramid on shopping tv. the funniest thing I’ve seen and not going to make one difference in your life or garden.

[@guidedmeditation2396]

You suffer from logic skepticism. It is both a blessing and a curse. It is wise to be skeptical until you know all of the facts but what I have learned in my many years of studying occult knowledge is most of it is shockingly counterintuitive. I would suggest you research as to how you can feel your toes and feet using electric impulses without a magnetic field generated by your heart.

[@ellemack7239]

You have to have 50-75% metal by volume to make orgone. It's not the crystals that make the orgone, the crystal adds to it only. It's the metal that does all the work. Educate yourself., Listen to Don and Carol Croft! No one makes them properly anymore so these pretty resin art pieces are not doing anything.

[@kalu9899]

Idc about energy, the pyramids look sick

[@theannihilator8800]

How nuts are you crazy guys??

[@questionMark4443]

Your negative name says it all be a creator it’s why we came here ☮️

[@msmith7795]

@@questionMark4443 Amen❤️

[@crad5476]

Unfortunately all the "benefits" it has dont exist. Its just like the placebo effect.

[@roygbiv7025]

whatever

[@theannihilator8800]

You guys are a lost cause

[@avm2071]

There are alot of same mass produced ones to buy. But, I am not sure that the metal shavings are the correct ratio. What is the correct ratio of metal to resin ?

[@emfsafefamily6245]

Most of the mass-produced ones are made to look pretty so they won't work as well. It should be about 50/50 ratio (half resin/half resin). Thanks!