Orthographic Projection_Problem 1

[@avinashspider7118]

I’m having by sem exam in 4 hrs and I had no clue about orthographic projections until now. Thank you. You are a life saver

[@ngjingming2718]

my test is tomorrow. this is of great help thanks!

[@ManasPatnaikofficial]

Hi "Foodie"....Well Thanks for appreciating my work... All the best in life And if you wanna support my channel visit this link: manaspatnaik.in/?page_id=401 Small contributions can make a Big Difference

[@WellaProcianos]

I have a test tomorrow and i understand very slow huhuhuhu i'm worried

[@mashudejowaka]

Last minute engineers

[@shuvankarsantra969]

sir at the starting point you said 'this is your friend'. I like it sir

[@richiejoseph0906]

I cleared my ED backlog because of this channel 😁😁... thank you sir

[@-FHareesh]

Bro still I didn't start seeing this videos.. Can you tell me By watching this we can cleared our backlog ED?? Plzz I want your opinion..

[@richiejoseph0906]

@@-FHareesh watch his video bro he explains in simple method u will understand easily

[@richiejoseph0906]

@@-FHareesh not only this watch involute, ellipse, parabola, hyperbola,

[@-FHareesh]

@@richiejoseph0906 Okay Bro I will watch Thankq For Ur reply...

[@derick3951]

You've just saved me. My exam is literally two hours from now and I had a problem with machine blocks and this has cleared any doubts i would have had.

[@ijibang7584]

very well explained 。。。very well taught。。。thank you for parting your knowledge FOC。。。 keep it up !!!

[@lol-yo8ho]

Best KZbin channel in engineering graphics.. thanks a lot sir..

[@ABHI-bi8fe]

Sir you are doing a great job I am watching almost every video now i am confident to attend my exam becoz of you👏♥️♥️

[@elton2720]

a lot thank you,,these are the kind of drawings i have been looking for

[@Kushal_kumara_rao]

Today I learnt the actual engineering graphics after a tremendous loss in first year

[@ManasPatnaikofficial]

Engineering Drawing | Engineering Graphics |: kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS

[@ManasPatnaikofficial]

Engineering Drawing HINDI: kzbin.info/aero/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU

[@kingslypinto6660]

I always follow this channel and i collected lot of knowledge free.thank u lot sr !

[@syedahzamtariq2881]

Sir, you are a legend. Salute from BITS Pilani

[@amishbhat3560]

+1 😂

[@anshulrawat4111]

Thanks Sir with the help of your videos i finally able to pass in Engineering. Drawing.

[@ManasPatnaikofficial]

Hi Anshul..... Great to know that my videos helped you learn..... Keep watching and do share this with your friends also... All the best......

[@vinayjustin8138]

Sir now my result came ........because of u iam passing my Engineering drawing ......tnqqqq soooooo much sir love u ...................

[@ayush10_08]

Happy. Teachers day sir,only bcaz of u i have clear my 1st year ,ty very much

[@ManasPatnaikofficial]

My best wishes are always with you Ayush take care

[@30_diyasutariya90]

very helpful.... to the students... thank you..

[@ManasPatnaikofficial]

Thanks for appreciating my work.... All the best in life And do share and recommend this channel to your friends and classmates so that they can also benefit... Cheers....

[@NK-fl4ox]

Manas Patnaik which screen recorder do you use?

[@ManasPatnaikofficial]

iTS tECHSMITH

[@NK-fl4ox]

Manas Patnaik thanks

[@30_diyasutariya90]

I have passed exam in this subject only because of these tutorials...😊😇

[@divyangtiwari1115]

Sir right side view ko left side kyu banaya ?

[@subhakantasethi9847]

Sir the profile plane should be on the right side of the v.p as it's first angle projection or is this something different

[@shivkul494]

Yes please someone tell

[@razzsawhoney2818]

Sir will you please make videos on Perspective projection?? I am getting too much confused on this....so please

[@nishantrathore6340]

Simply amazing the work you do.. Helpful is nothing but an understatement to what you do with your presentations.. True fan..

[@freelearn9324]

Thank you, sir. Your tutorials helped me to achieve good marks in the exam. When I started watching your videos, I had no idea about this subject. But your videos helped me understand the subjects.

[@zena6412]

It's also my first time, please help me

[@noelthomasbejoy3089]

Thank you sir, I got a B+ instead of an F only because I learned from your videos.

[@paone_02]

Really outstanding explanation sir Hats off 2 u sirr!!💞👌👏👍

[@ManasPatnaikofficial]

Thanks Paone for appreciating my work. All the best

[@paone_02]

Manas Patnaik tqq sir

[@sirikondaharish1704]

Thank u sir for making wonderful videos about diploma drawing and also prepare an app for diploma students on bases of diploma subjects

[@veereshn4579]

It's nice teaching sir please can upload few more different problems on orthographic projections

[@rizwankhan-gb5bq]

sir please upload *nomography* *and* *perspective* *projection*

[@1streh]

Please is the y-axis a particular distance away from the front and top views? Or was it a vertical line drawn at any distance? I thought there'd be a measurement for that.

[@pushkardeotale3019]

Sir,I really love your videos.They are a lot of help.

[@shreyapillai6149]

I didn't understand how it is a first angles projection. It looks like third angle

[@kiranshehzadi725]

in 3rd Angle projection how sheet is distributed for both right and left side views?

[@satyarup1693]

Sir, it would be really nice if you could please develop content on sectional orthographic projections too. Keep up the good work!

[@ManasPatnaikofficial]

Sure

[@barkhagoswami7410]

Sir ... Your videos is very helpful for me .. during this lockdown.. thank you so much sir..

[@nanipsudharsanraosudharsan1982]

Sir your explanation is very good it is easy to understand

[@diwakarv7707]

Please explain the very basics to draw orthographic projection in paper sir it's my humble request sir

[@summerwilkins4615]

Hopefully he will. What he's done here is good and very clearly explained, but I'm just not understanding it.

[@sachinbhatbob8377]

Great help..Done with the topic ..Thank you@Manas_Pathnaik

[@kapilgoyal6438]

Sir, in this video you have taken right hand side view in 1 angle projection But in 1 angle projection we take left hand side view Sir please help me with this problem

[@sumitmehra5119]

yes i am in confusion too

[@SujoyShivde]

Right hand side view will have to be drawn as we have no data about the left hand side view considering the Observer Arrow position too. That's how we simplify this issue. :)

[@sandeeptiwari3655]

Kapil Goyal Jo first video hai use Dekho clear ho Jayega

[@sushmanichenametla7327]

Can you pls explain more problems on orthographic projections sir

[@harshjadhav9307]

Sir can we take scale in orthographic projection if the dimensions are too large as per the size of the drawing sheet?

[@sahanuralam9363]

Sir,please make a video on the horizontal and vertical projections of straight lines are given visualize the lines determine the true lengths,alpha,beta and gamma by revolution method,A(0,20,15)B(50,40,10)

[@balamahesh5260]

Sir, I need your videos of machine drawing of mechanical engineering.if available means plz mention the link below

[@zxcvbnm6669]

Fantastic.. love your content..fell in love with a new hobby

[@pallavichandimani9677]

ur videos are helpful......since gud xplaination

[@yagnesh1706]

Right

[@manijayasurya6450]

We r blessed to have u sir...

[@kushagrabainsla1641]

Sir, shouldn't the projectio of profile planebe on the right side of the projection of front view. Pls answer this sir

[@djemtee8285]

thanks.. Help us try more projections with drills and other hidden features

[@fatimamasroor4904]

Can the principle plane be made on the right side of verticle plane intead of making it on left side of VP in 3rd angle projection ? Plzz tell

[@parshuramavidi2578]

Sir why you drawn side view on left side, i mean in some videos it is on right side ? Is it ok to draw anywhere ?

[@meersameer7547]

Tq for making videos this are very helpful to all the engineering students

[@yatiyani1850]

all your tutorial video is very helpful. Thank you. May you be blessed with great health & wealth.

[@ManasPatnaikofficial]

Thanks for your kind words.....

[@yatiyani1850]

You deserve the kind words as kind as your contribution to the community

[@tejusweetyserene]

Tqsmch u continue like this there would be no backlogs for us tqsmch manas😘😘

[@ManasPatnaikofficial]

Thanks Tejaswi....

[@tejusweetyserene]

Today I attempted all questions just because of listening to ur class tqsmchhh 😘😘

[@shanmukhas.s.b6604]

These are helping us very much Thank you for making these

[@ManasPatnaikofficial]

Engineering Drawing | Engineering Graphics |: kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS

[@maheswarisubramanian3865]

If u add videos related to perspective projection using visual ray and vanishing point method it will so so helpful

[@guggillashravani2486]

It is very useful to the students. thanks sir .

[@pbeeeeee7]

Sir i have a doubt regarding the top view of this problem is int suppose. To be 30x 40. In dimensions and the extruded part should be in bottom in top view ???

[@shawndcosta8142]

What is better? T-Scale or Mini Drafter?

[@n.prabhakarrao1861]

Super bro it is a great information for us👍👍

[@ujwal9792]

Draw isometric projection of a pentagonal prism of base edge 25mm and height 60mm when its axis is horizontal.sir can u explain this answer

[@ratigurjar8498]

Bhagwan kha ho aap , apke Charan sparsh krne hai apki vajah se ed me pass ho gya #adidevmanas

[@__kajalsrivastava4029]

Thanks sir very helpful 😇🙏

[@Leatricethelyricist]

i have to construct a the pieces together...taking the isometic pieces apart is not as hard as putting them together...can you do that

[@zaynsyed3308]

Thank u sir helped me a lot for my exam

[@muhammadrahim7043]

Where can we get the figures of the objects that you have taken

[@pkjbhandari1974]

Thanks Manas. I have e-mailed you about few queries with example. Was wondering you got it?

[@vaisakh1424]

nice explanation....easy to understand..

[@sheikhsaddam8277]

you are osom sir,excellnt wat a video buddy.

[@nurulhazwanisabri2086]

Fantastic

[@sekhargottapu410]

Please explain on isometric circles problem

[@kbgowda4624]

Usefull bro

[@p.harika]

Sir, but my sir said that we can't repeat the dimensions . U repeated 15 and 30 dimensions twice . Plz clear my doubt sir I am really confused

[@manojgarg]

2:57 you have said that horizontal line appears to be attached with slope line sir can u explain this how?

[@kedarparab8001]

bro when you will see from front you will just see a line which is touching that inclined plane so it is that way

[@vijik8823]

How to direct if you draw this image from a third angle

[@n.c.chanduprasanth135]

sir it is very useful .thank you sir

[@summerwilkins4615]

This is well done, and does help a little, but I wish he'd slow down just a bit. To be fair though, I'm a painfully slow learner. I just don't understand this stuff at all, really, but I've still got a whole year of it in school:(.

[@ManasPatnaikofficial]

All the very best👍💯

[@abhishekvasu9470]

Sir I want polygon construction method ..

[@sandilevgina1392]

This is the flipped from my😲 my has FV on second quadrant, TV on third quadrant & side view on First quadrant....am I wrong?

[@priyankakapale5105]

Thank you so much, you explained very well.🙇

[@ManasPatnaikofficial]

Thanks a lot 😊 Do share it with your friends also.

[@shivraj9481]

Sir, what is different between pictorial representation and isometric representation? Plzz

[@kathyarce9143]

is that top view?

[@vishalkumarsaini4026]

Sir what software you use for engineering drawing

[@bs2755-g7u]

Sir please make video on sectional orthographic projection as early as possible please 🙏🙏🙏🙏

[@rathodjaipal5404]

Make a video about how to draw in exam

[@mpsinha1511]

sir...please make video about construction of nut and bolt.i have search but didn't get right one or correct one. (sandy)

[@ManasPatnaikofficial]

+Mp Sinha Hi sandy.... Ya sure i will may be in the future

[@sathavahana5587]

sir do videos on more problems in this topic please

[@ksysiddesh2960]

good I thing less time to take for explaining is better

[@lakshmipriya9864]

Sir how we can know whether it is a FV or TV

[@sojasyadav8035]

gp re tu ata nhi hai to ghar pe bhet clg mat jaa zandu

[@sandeeptiwari3655]

Sir third angle projection me dimag me Kuch aur hi figure ban Raha hai banane par Kuch aur ban Raha hai please answered me what I do

[@asadkhrd2218]

Can anyone please tell me ehich angle of projection is this? As its different from 1st angle as well as 3rd angle.

[@priteshchavan4580]

sir how to darken the line in autocad 2016 I am not getting

[@savanthdubba1403]

upload some more problems on orthographic projections

[@anuradhakumari2958]

Nice explain.... tq so much

[@AyushSharma80001]

I understood

[@madeshsmadeshs5168]

Sir that the dimensions you done is correct and you have did in the diagram that's wrong sir

[@saimahesh9244]

Plz upload some videos on machine drawing

[@mysteryhacker6269]

Thanks sir A lot studied 💞

[@prudhvi5211]

Sir in projection of straight lines inclined to both HP& VP in that chapter what is the meaning of *real distance* or it's called as TL

[@prudhvi5211]

Sir plz _rply_

[@rajesshmech]

true lingth means original length it is constant . but front view and top view length different.

[@kashishgarg5622]

How can we decide where right hand side view is to be drawn on left or right? Please help sir.

[@ManasPatnaikofficial]

That arrow in the 3d figure is meant for Front View...... In this 3d picture the right side view is clearly visible but the left side view isnt and hence right hand side view is to be drawn..........

[@kashishgarg5622]

Manas Patnaik thanks sir

[@gauravpradhan5541]

Man u do as if we already know the topics and seeing ur videos for revision, first of all make us understand how to do it not just u solve as if we are clear with everything

[@hopeoharisi8397]

Nice videos on drafting

[@sipomengineering3747]

I agree nice videos on drafting

[@hopeoharisi8397]

Awesome video on AutoCAD 3D. I have some fine AutoCAD tutorial videos on my channel that may be helpful too

[@prabuddhbharat2934]

Sir Try to Cover ESE examination questions...Safety also...

[@vijik8823]

How to this picture first angle to third angle

[@sumitmehra5119]

sir in 1st angle shouldn't we go with LHS