ORTUR Laser Master 3...Best Laser Engraver For Beginners?

‪@ORTUROFFICIAL‬
‪@lightburnsoftware7189‬
MADE THE BEST: www.madethebest.com/?aff=181
This is an introduction video to the ORTUR Laser Master 3. Made the Best was nice enough to send us the new Ortur LM3 along with some accessories. There will be affiliate links below for everything in the video.
This is a great route to take to get started in the CNC market. This machine can do more than I can imagine. This video will cover the LightBurn software and testing the laser out. Feel free to leave any feedback or questions in the comments.
Don't forget to SUBSCRIBE and check out the product links.......
MADE THE BEST www.madethebest.com/?aff=181 LINKS:
Ortur Laser Master 3: www.madethebest.com/collectio...
LM3 Feet: www.madethebest.com/collectio...
Rotary Roller:bit.ly/38xXa2H
Air Assist Pump: www.madethebest.com/collectio...
Laser Bed/platform: www.madethebest.com/collectio...
Laser Master 2 S2: www.madethebest.com/collectio...
AMAZON AFFILIATE LINKS:
Ortur Laser Master3: amzn.to/3NKwWvp
Ortur Laser Master 2 S2: amzn.to/43VqhEB
LM3 Feet: amzn.to/3CN3peg
Air assist pump: amzn.to/3CLXpCM
micrometer:amzn.to/3NmUK52
Rotary Roller: amzn.to/3QmIeGd
Leather: amzn.to/3QN059F
Ortur KZbin page:
/ @orturofficial
Lightburn KZbin page:
/ @lightburnsoftware7189

[@SpicerDesignsLLC]

Check out all the this laser equipment on Made The Best’s website: www.madethebest.com/?aff=181

[@PeterHedenberg-wi7mm]

Good video

[@kristlthompson4721]

First of all, thank you for this video. When I first started watching it, I didn’t think it would really have any information useful to me, as I already bought (but have yet to use) my Ortur Master 3, leading me to search for setup/configuration videos. Since this is my first engraver, I decided to sit through the features comparison of the previous model (which only confirmed that the 3+ months I spent extensively researching engravers before finally choosing this one was time well spent). And then this happened: I got a quick Lightburn tutorial over the very basics, which helped finalize my decision to go ahead with purchasing the software (again, extensive research is a thing with me), so thank you for that - and Lightburn should thank you, too, because I was really holding out for something free, but this simple demonstration convinced me that it will be a worthwhile investment in the long run for my intended purposes. 👍 I also LOVE the quirky comedic aspects and bleeped-out curse words that make it real-I feel like I’m hanging in the shop with my hubby while we create cool stuff (just wish mine was this clean). I subscribed, BTW, as your other videos seem just as interesting and informative as I found this one to be, and SO many different topics! I cannot wait! And yes, since I said “first of all”, here is the second thing (and the last, so no fear 😂): you said you were curious to experiment with other materials for this machine (“machine”), so if you are up for a challenge, I propose to you “the challenge coin challenge - creating a custom coin using Ortur LM3 (or any 10W diode laser engraver). The materials: the machine (which you have), challenge coin blank (Amazon sells a 3-pack set with a silver, gold and rose gold plated blank for approximately $9 - basically a sample set to test on before committing to larger purchases). So, can it be done? What method produces the best results (metal marking v. just engraving, etc.)? What settings create the cleanest finished product? How detailed can a laser-engraved coin design be (lines v. photos/greyscale images , etc.), how small can the text be, and so on… There’s your challenge. Mine, too, actually, as this is my first project goal (I know, but dream big or go home, right?) However, I won’t be making a video about it and there are few on KZbin (that I have found anyway) that begin to answer any of these questions, so I’m diving into it blind, and as a newbie. I’ll get my answers very soon through trial and error (probably a LOT of error), but I’m sure there are TONS of people looking for similar answers who would LOVE a video exploring and explaining this process. Thanks again for this video. You now have my 2 cents. Take it at face value and run with it if you dare. Have fun!😊

[@SpicerDesignsLLC]

Thank you very much for the nice comment. People like you make it worth putting these videos together. We like to keep things light on the channel. Its not for everyone but its all in good fun. I do have some other ortur videos that are pretty good tutorials. Thanks again and glad to have you. Also, i will look into that coin challenge. Sounds cool.

[@bogdanmarinescu78]

"But mommy, my arm's broken". Almost spilled my coffee. Pure gold 👍

[@SpicerDesignsLLC]

Glad you liked it. The girls love being in the videos.

[@parker1ray]

I have an Xtool D1 pro 30 watt and an Atomstack X7 Pro 20 watt. Just a bit of info. Many of the rotary manufactures like Atomstack are using the same series stepper motor on the Y axis on the laser as is included with the rotary tool you do not need to do any setup in Lightburn I just burned five mugs today and did not change anything in Lightburn Lightburn is the only software that should be used in my opinion. It is very powerful and is evolving everyday!

[@SpicerDesignsLLC]

Xtool is a very nice laser from what ive heard. And i agree, lightburn is great software. Thanks for the info.

[@markdavidthompsonjr.7695]

you two are funny

[@stevecox552]

Awesome!!!!!,,,,, Keystone girl,,, LOL,,,, Love it,,,,,, and love keystone as well. - new subscriber here

[@SpicerDesignsLLC]

Glad to have you Steve. Hope you enjoy the channel.

[@gegao3473]

Great machine 👍

[@jasongrinnell1986]

Lol, that was awesome. Everyone needs a keystone girl.

[@joshuacaylor881]

Y’all are hilarious, bro. Love your videos.

[@SpicerDesignsLLC]

I try to make them as entertaining as i can. Thanks for the comment!

[@kiotimike]

Great little machine. Could be very handy machine.

[@kunkprime6980]

Well-Known Issues with Ortur Lasermaster 3: A Comprehensive Review Issue 1: Ortur LM-3 Not Powering On One of the most prevalent problems encountered by users of the Ortur Laser Master 3 is its failure to power on. This issue can stem from various factors, including a faulty power adapter, blown fuse, loose connections, malfunctioning laser module, or motherboard glitches. Notably, the Ortur LM-3 has faced criticism for having an underpowered "power brick." Despite seeking assistance for this issue, my attempts were met with silence. Subsequently, I discovered a suitable replacement on Amazon. Issue 2: Inadequate Laser Engraving When laser engravings fail to meet expectations, several causes might be at play. These include improper focus, uneven engraving area, or unsuitable materials for engraving. Issue 3: Mid-Operation Halts Frequent occurrences of the machine halting during operations can be attributed to loose connections, faulty motors, or software/firmware glitches. This issue has been highlighted extensively on KZbin. Issue 4: Subpar Engraving Quality Substandard engraving quality can arise due to incorrect settings, a dirty lens, or a malfunctioning laser module. To rectify this, adjustments in settings, proper lens maintenance, and considering the laser module's condition are recommended. Issue 5: Smoke and Odor Production During operation, the machine emitting smoke or strong odors might be a result of a dirty lens, improper settings, or insufficient ventilation. This concern is commonplace among lasers, particularly during cutting. Installing proper external ventilation and employing an enclosed setup are advised solutions. Issue 6: Unusual Motor Noises Motors emitting abnormal sounds during operation may be attributed to loose connections, inadequate lubrication, or faulty motors. Similar observations have been shared on KZbin. A common cause was Ortur's inadequate tightening of drive sprocket set screws, resulting in loosening. Issue 7: SD Card Recognition Failure When the machine fails to recognize an SD card, possible reasons include a faulty SD card, corrupted files, or firmware complications. Contacting Ortur for assistance may lead to unresponsiveness, as evidenced by my own experience. Issue 8: Machine Freezing During Operation Machine freezing mid-operation may stem from software/firmware glitches, motherboard issues, or communication problems between the machine and the computer. Establishing a reliable link between my Ortur LM-3 and my computer proved to be a major struggle. Despite weeks of effort and assistance from Ortur, I ultimately sold my brand-new machine at a loss due to this issue. Issue 9: Inconsistent Engravings Inconsistent engraving results might result from incorrect settings, a dirty lens, problematic materials, or a malfunctioning PWM (pulse width modulated) laser power controller. Obtaining assistance from Ortur for this issue was often challenging. Lack of Customer Support and Service In terms of customer service and support, Ortur falls significantly short. Despite purchasing their hardware, I received no aid when problems arose. Requests for help went unanswered, and defective parts were disregarded. Unfortunately, Ortur seems unwilling to invest in its customers' needs or satisfaction. Personal Experience with Ortur LM-3 My excitement for the Ortur Laser Master 3's potential to enhance my workshop quickly turned to disappointment and frustration. Despite its promising appearance, I encountered only obstacles and minimal assistance from Ortur. Their lone response directed me elsewhere for help. Ultimately, after exhausting various resources without resolution, I was forced to sell the Ortur LM-3 at a substantial loss, leading to the demise of my aspirations. An Urgent Recommendation Given my ordeal, I strongly advise considering alternative options before investing in an Ortur product. It is my hope that you avoid supporting a company that displays such an evident lack of commitment to both product quality and customer service. Parting Thoughts I am not inclined to write negative reviews, but I felt compelled to share my experience as a cautionary tale for others. Thank you for taking the time to read my account, and I sincerely wish you success in your pursuit of a laser product that truly meets your expectations.

[@OneEyeCustoms]

I’d like to see some other materials engraved. Use the same logo but on steel, aluminum, wood and maybe plastic??? Cool “machine”! 😁

[@BoMann-be5xt]

You didn't show how to connect it to the computer being these are wireless machines without USB. Is it bluetooth or do you need wifi in the shop to connect like how a Roku device works?

[@SpicerDesignsLLC]

I believe its some kind of wifi signal. I havent experimented with it yet. I dont have wifi in my shop. I think theres some other videos out there on that connection.

[@pointersrule]

The Keystone Girl is HOT!!!😀

[@IndyFarmLife]

You are rounding out your setup nicely! I'm curious though. What kind of range do you get out of your beer delivery system? Seems it's coming along nicely as well.

[@SpicerDesignsLLC]

Right now it works everywhere on the property. Im in the process of expanding the range. We’ve been working on her endurance.

[@IndyFarmLife]

@SpicerDesignsLLC I'm going to need some pointers on how to get mine setup like that. 😂

[@p.t.anderson1593]

What I'd really like to see is a way to use a cutting laser on the Langmuir Systems Crossfire Pro that I already have. I have limited space, so I would literally be setting one of these up temporarily on the LS CF cutting surface.

[@SpicerDesignsLLC]

That would be a great option to have a laser engraver attachment. I dont think those stepper motors can move as fast as the engravers do.

[@GuzzyMan]

Nice. How does the lm3 "machine" do with wood and metal objects?

[@SpicerDesignsLLC]

It does great with wood and coated metal products. I need to do more testing on different metals. Its a pretty powerful for a desktop diode laser. Ill have more videos testing different materials hopefully soon.

[@justingates4042]

You said you were going to leave a link for the leather sheets, but I don't see one. Do you still have it?

[@SpicerDesignsLLC]

Looks like i missed that one. Sorry about that. Ill add it in now. Give me 5 minutes

[@justingates4042]

@@SpicerDesignsLLC Thanks so much! And love this video! This helped me decide to buy the Ortur Laser Master 3 20w machine. I have now subscribed and and bought a bunch of things to get things rolling. Thanks so much!

[@SpicerDesignsLLC]

@@justingates4042 thats awesome! Congrats. Glad it was helpful and feel free to reach out with any questions. I do have a variety on the channel but there will be a lot more engraving videos coming soon.

[@justingates4042]

@@SpicerDesignsLLC Do you have videos how to connect the Ortur LM3 20W with USB and getting Windows to connect to it? I was trying to use LaserGRBL (free) for now before moving into something that costs. So I was curious why I'm having issues. Device Manager recognizes COM3 port for the laser engraver, but no matter what I do in LaserGRBL, it doesn't connect. I've tried online forums, communities, Facebook groups, and nothing is giving me hope here lol.

[@fredmcveigh9877]

What about the poor girls broken arm ???

[@SpicerDesignsLLC]

Hah. She walked it off.

[@thebuzztone]

Ive tried the link for the rotary roller. The unit never shipped. After some time , was able to get a refund. Amazon seems the better option. May want to dump that link,

[@SpicerDesignsLLC]

Mmh thats no good. Ill check it out. Sorry you had a bad experience

[@thebuzztone]

@@SpicerDesignsLLC No worries, just wanted to give a heads up . I really enjoy all that you share. Rock On !