Oscilloscope - What is and How to use it?

[@sterkriger2572]

Very nice! I always wondered how the oscilloscope works because it’s so ubiquitous with electronics that you can’t really ignore it

[@SusanAmberBruce]

Yes, it's a very handy bit of kit, I would like to see more scopes incorporate digital decoding as a standard feature, you hook it to USB data lines and voilà you can see what the data represents

[@ELECTRONOOBS]

@@SusanAmberBruce actually this one decodes uart and I2C

[@MisterkeTube]

For digital signal decoding a (cheap or expensive) data analyzer (with 8 or 16 channels) will likely be more useful. For around $20 you can get one that can handle up to 8 100MHz signals using sigrok (and the GUI on top of it whose name now escapes me). For Arduino stuff it's great. For really high-speed or wider busses you'll have to open your wallet way more.

[@SusanAmberBruce]

@@MisterkeTube Yes, I got one, and it was inexpensive.

[@ResistanceLion]

"What is that screen that you have on your videos" LOL oh Jesus

[@mjarefi]

the best training osciloscop for beginner on youtube..thanks

[@awengirr]

Finally I understood everything. Thank you so much!

[@misujr]

Keep going! ❤

[@ELECTRONOOBS]

That's the plan! :))) thanks

[@styrishrodrigues]

Thank you brother. Much needed such videos ❤️

[@alessandrovichi761]

Very good explanation

[@ryanmowry1170]

Your videos are awesome! Thank you for spending the time to teach people everything there is to know about electronics! 😃👍

[@mr.q3216]

Nice video. Educational and examples help.

[@4115steve]

Great video, thanks for sharing.

[@DimasFajar-ns4vb]

your skills is amazing sir good job sir and zamzam water

[@l0I0I0I0]

TY! How can we use the o'scope to measure a huge capacitor like 5000 f?

[@ELECTRONOOBS]

@@l0I0I0I0 use the 63% charging time constant.

[@l0I0I0I0]

@@ELECTRONOOBS ok ty!. How might I do thsy with my hantek handheld, 63% constant?

[@ELECTRONOOBS]

@@l0I0I0I0 uff i have a very old tutorial on that: electronoobs.com/eng_arduino_tut10_1.php charge the cap to any voltage through a known value resistor. Measure with the scope the time it takes to reach 63% of that voltage. Divide that time by the resistor value and you get the cap value.

[@l0I0I0I0]

@@ELECTRONOOBS Nice ty!

[@kermitdafrog8]

I want to use my bitscope but am afraid to make a mistake and break it.

[@Trinitrophenylmethylnitramines]

Oscilloscope and spectrum analyzer are they similar? What is the difference between them?

[@ELECTRONOOBS]

The spectrum analyzer is used to measure all frequencies information on some signals, but the scopes are used to measure the timing information of signal.

[@claudiu.ivan666]

Hola. Haces buenos vídeos y sigo tu canal desde hace tiempo. Estoy interesado en una comparativa entre cargadores usb para coches. He buscado en KZbin y no hay. Un saludo

[@arnavpawar256]

Greetings! 😀 I really want you to make a video about an ASK based CB frequency radio transmitter for long range serial communication. Because the currently available modules like nrf are very low ranged, I think a custom radio transmitter would be a great idea for such projects. I watched some videos where Arduino timers are used to generate an AC carrier signal with two of its pins. But couldn't find a detailed description anywhere. I hope you try this project 😃 Good luck 🤞

[@arnavpawar256]

@electroboom I think choosing a suitable legal radio frequency in the Mhz range would be good, because it will have greater range than 2.4Ghz. I would also like to know more about the various anteena designs for such projects 😃 because anteenas matter a lot. Anyways, I hope you look into it 👍

[@arnavpawar256]

@electroboom I just want to know about a suitable circuit to generate a stable carrier frequency, so it can be turned on or off using a MOSFET, according to the logic level of the serial pins. Btw it would be a great project for something like an encrypted serial audio walkie talkie project 😀

[@maven_grandprime]

Someone is telling me that the oscope is only for measuring voltage over time. Do i hear it right?

[@daveluxton8317]

nice video. I'm looking at the $500 range for my scope. So I'm thinking a budget scope (Rigol or Siglent) is not going to have most of those features as your $3200 scope

[@ELECTRONOOBS]

I'm not that rich so my scope is the 1000 series and is was around 1500 dollars. But you have the lower series like this one: www.keysight.com/us/en/product/EDUX1052A/oscilloscope-50-mhz-2-analog-channels.html for around 500 dollars.

[@innocent1.]

👍